All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lisa Mitchell <lisa.mitchell@hp.com>
To: "Hoemann, Jerry" <jerry.hoemann@hp.com>
Cc: kexec <kexec@lists.infradead.org>
Subject: Re: [PATCH v9] x86, apic, kexec, Documentation: Add disable_cpu_apic kernel parameter
Date: Mon, 09 Dec 2013 03:52:33 -0700	[thread overview]
Message-ID: <1386586353.17054.33.camel@lisamlinux.fc.hp.com> (raw)
In-Reply-To: <1386333299.17054.29.camel@lisamlinux.fc.hp.com>

On Fri, 2013-12-06 at 05:35 -0700, Lisa Mitchell wrote:
> On Thu, 2013-12-05 at 21:58 +0000, Hoemann, Jerry wrote:
> > 
> > Sorry if you're getting multiple copies, but i have had problems with
> > my subscription to the kexec mailing list and am resending.
> > 
> > 
> > 
> > On Tue, Dec 03, 2013 at 10:25:36AM -0500, Vivek Goyal wrote:
> > >
> > > Hi Hatayama,
> > >
> > > We are almost there. A minor nit. Why have we specified KEXEC here. This
> > > parameter disabled_cpu_apicid does not seem to dependon CONFIG_KEXEC?
> > >
> > > Jerry, this patch looks good to me. Does it work on your system?
> > >
> > > Thanks
> > > Vivek
> > 
> > 
> > Vivek,  Hatayama,
> > 
> > I've back ported v9 of this patch to 2.6.32 and 3.0.80 based kernels to
> > test with existing distros.
> > 
> > I've tested on our smaller prototype server specifying nr_cpus=8/maxcpus=8
> > to the capture kernel.  One hundred iterations (echo c > /proc/sysrq-trigger)
> > varying target cpu and system load to each kernel.
> > 
> > The 2.6.32 based distro kernel showed the < 5% soft lockup
> > (still unresolved) during boot of capture kernel.  This is
> > something i've seen on all versions of the patch that i've tested.
> > 
> > The 3.0.80 based distro kernel has had zero failures.
> > 
> > I have not had a chance to test upstream kernels or on
> > our larger prototype configuration.
> > 
> > We still plan to test on our larger prototype.  Testing of
> > prior versions of the patch on the larger systems didn't show
> > problems w/ this functionality and I don't anticipate we'll
> > find anything this time either.
> > 
> > I am okay with this patch being accepted upstream and working
> > the intermittent 2.6.32 failures separately.
> > 
> > 
> > Jerry
> > 
> 
> Another update, I have tested our max cpu configuration prototype, with
> a fairly large IO config with the backported 3.0.80 kernel Jerry
> mentions above with the v9 patch backported, and this system got 7 out
> of 7 successful dumps, with max_cpus=8, so far in testing. This system
> has a a fairly large IO configuration too, such that intermittently
> booting the crashkernel with 1 cpu  the crashkernel boot would hang due
> to IRQ for system disk not getting assigned.   So this is early
> indication that this patch is working well on larger IO configurations.
> 
> I plan to test with the 2.6.32 base with v9 patch over the weekend on
> this large configuration.   The system takes much longer to dump than
> the minimum config, so it is harder to build up as many iterations over
> a short time, plus I have to share the system with others.  
> 
> Thanks,
> 
> Lisa Mitchell
> 
I have now tested the version 9 patch on  a 2.6.32 base on the max
cpu/large IO configuration, and got 8 out of 8 successful dumps, (7 with
nr_cpus=8, and one with nr_cpus=16).


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

      reply	other threads:[~2013-12-09 15:17 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-03  1:32 [PATCH v9] x86, apic, kexec, Documentation: Add disable_cpu_apic kernel parameter HATAYAMA Daisuke
2013-12-03  1:32 ` HATAYAMA Daisuke
2013-12-03 15:25 ` Vivek Goyal
2013-12-03 15:25   ` Vivek Goyal
2013-12-04  3:08   ` HATAYAMA Daisuke
2013-12-04  3:08     ` HATAYAMA Daisuke
2013-12-04  6:24     ` HATAYAMA Daisuke
2013-12-04  6:24       ` HATAYAMA Daisuke
2013-12-04 17:36       ` Vivek Goyal
2013-12-04 17:36         ` Vivek Goyal
2013-12-04 20:21   ` Jerry.Hoemann
     [not found]   ` <20131205190949.GA23528@anatevka.fc.hp.com>
2013-12-05 21:58     ` jerry.hoemann
2013-12-06 12:34       ` Lisa Mitchell
2013-12-09 10:52         ` Lisa Mitchell [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386586353.17054.33.camel@lisamlinux.fc.hp.com \
    --to=lisa.mitchell@hp.com \
    --cc=jerry.hoemann@hp.com \
    --cc=kexec@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.