From: Stefan Assmann <sassmann@kpanic.de>
To: mcgrof@kernel.org
Cc: backports@vger.kernel.org, hauke@hauke-m.de, sassmann@kpanic.de
Subject: [PATCH RFC 07/10] backports: igb fixes for linux-3.4
Date: Thu, 12 Dec 2013 10:27:59 +0100 [thread overview]
Message-ID: <1386840482-585-8-git-send-email-sassmann@kpanic.de> (raw)
In-Reply-To: <1386840482-585-1-git-send-email-sassmann@kpanic.de>
- add struct ethtool_ts_info
- add struct ethtool_modinfo
- add struct timestamp_event_queue
- add struct ptp_clock
- add ptp_clock_index()
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
---
backport/backport-include/linux/ethtool.h | 48 ++++++++++++++++++++++
backport/backport-include/linux/ptp_clock_kernel.h | 35 ++++++++++++++++
backport/compat/compat-3.5.c | 7 ++++
3 files changed, 90 insertions(+)
create mode 100644 backport/backport-include/linux/ptp_clock_kernel.h
diff --git a/backport/backport-include/linux/ethtool.h b/backport/backport-include/linux/ethtool.h
index e375ee9..9a7575f 100644
--- a/backport/backport-include/linux/ethtool.h
+++ b/backport/backport-include/linux/ethtool.h
@@ -42,6 +42,54 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
}
#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0)
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079 0x1
+#define ETH_MODULE_SFF_8079_LEN 256
+#define ETH_MODULE_SFF_8472 0x2
+#define ETH_MODULE_SFF_8472_LEN 512
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively. For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+ __u32 cmd;
+ __u32 so_timestamping;
+ __s32 phc_index;
+ __u32 tx_types;
+ __u32 tx_reserved[3];
+ __u32 rx_filters;
+ __u32 rx_reserved[3];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+ __u32 cmd;
+ __u32 type;
+ __u32 eeprom_len;
+ __u32 reserved[8];
+};
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) */
+
#if LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)
/**
* struct ethtool_eee - Energy Efficient Ethernet information
diff --git a/backport/backport-include/linux/ptp_clock_kernel.h b/backport/backport-include/linux/ptp_clock_kernel.h
new file mode 100644
index 0000000..1b72093
--- /dev/null
+++ b/backport/backport-include/linux/ptp_clock_kernel.h
@@ -0,0 +1,35 @@
+#ifndef __BACKPORT_PTP_CLOCK_KERNEL_H
+#define __BACKPORT_PTP_CLOCK_KERNEL_H
+#include_next <linux/ptp_clock_kernel.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0)
+#include <linux/posix-clock.h>
+
+#define PTP_MAX_TIMESTAMPS 128
+#define PTP_BUF_TIMESTAMPS 30
+
+struct timestamp_event_queue {
+ struct ptp_extts_event buf[PTP_MAX_TIMESTAMPS];
+ int head;
+ int tail;
+ spinlock_t lock;
+};
+
+struct ptp_clock {
+ struct posix_clock clock;
+ struct device *dev;
+ struct ptp_clock_info *info;
+ dev_t devid;
+ int index; /* index into clocks.map */
+ struct pps_device *pps_source;
+ long dialed_frequency; /* remembers the frequency adjustment */
+ struct timestamp_event_queue tsevq; /* simple fifo for time stamps */
+ struct mutex tsevq_mux; /* one process at a time reading the fifo */
+ wait_queue_head_t tsev_wq;
+ int defunct; /* tells readers to go away when clock is being removed */
+};
+
+extern int ptp_clock_index(struct ptp_clock *ptp);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) */
+
+#endif /* __BACKPORT_PTP_CLOCK_KERNEL_H */
diff --git a/backport/compat/compat-3.5.c b/backport/compat/compat-3.5.c
index 95f52b9..ebc0a19 100644
--- a/backport/compat/compat-3.5.c
+++ b/backport/compat/compat-3.5.c
@@ -12,6 +12,7 @@
#include <linux/highuid.h>
#include <linux/ktime.h>
#include <linux/hrtimer.h>
+#include <linux/ptp_clock_kernel.h>
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0))
#include <linux/device.h>
@@ -64,3 +65,9 @@ int overflowgid = DEFAULT_OVERFLOWGID;
EXPORT_SYMBOL_GPL(overflowuid);
EXPORT_SYMBOL_GPL(overflowgid);
#endif
+
+int ptp_clock_index(struct ptp_clock *ptp)
+{
+ return ptp->index;
+}
+EXPORT_SYMBOL(ptp_clock_index);
--
1.8.3.1
next prev parent reply other threads:[~2013-12-12 9:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 9:27 [PATCH RFC 00/10] backports: add igb driver Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 01/10] backports: add igb ethernet network driver Stefan Assmann
2013-12-13 0:27 ` Hauke Mehrtens
2013-12-13 7:39 ` Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 02/10] backports: igb fixes for linux-3.9 Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 03/10] backports: igb fixes for linux-3.8 Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 04/10] backports: igb fixes for linux-3.7 Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 05/10] backports: igb fixes for linux-3.6 Stefan Assmann
2013-12-13 0:46 ` Hauke Mehrtens
2013-12-13 8:01 ` Stefan Assmann
2013-12-12 9:27 ` [PATCH RFC 06/10] backports: igb fixes for linux-3.5 Stefan Assmann
2013-12-12 9:27 ` Stefan Assmann [this message]
2013-12-12 9:28 ` [PATCH RFC 08/10] backports: igb fixes for linux-3.3 Stefan Assmann
2013-12-12 9:28 ` [PATCH RFC 09/10] backports: igb fixes for linux-3.2 Stefan Assmann
2013-12-12 9:28 ` [PATCH RFC 10/10] backports: igb fixes for linux-3.1 Stefan Assmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386840482-585-8-git-send-email-sassmann@kpanic.de \
--to=sassmann@kpanic.de \
--cc=backports@vger.kernel.org \
--cc=hauke@hauke-m.de \
--cc=mcgrof@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.