From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc()
Date: Thu, 26 Dec 2013 14:51:30 -0200 [thread overview]
Message-ID: <1388076695-28174-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@freescale.com>
set_vddsoc() is not used anywhere else, so make it static.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- None
arch/arm/cpu/armv7/mx6/soc.c | 2 +-
arch/arm/include/asm/arch-mx6/sys_proto.h | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a390296..6cbade7 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -101,7 +101,7 @@ void init_aips(void)
* Possible values are from 0.725V to 1.450V in steps of
* 0.025V (25mV).
*/
-void set_vddsoc(u32 mv)
+static void set_vddsoc(u32 mv)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 val, reg = readl(&anatop->reg_core);
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 8c21364..17125a6 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -29,8 +29,6 @@ u32 get_cpu_rev(void);
const char *get_imx_type(u32 imxtype);
unsigned imx_ddr_size(void);
-void set_vddsoc(u32 mv);
-
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
--
1.8.1.2
next reply other threads:[~2013-12-26 16:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-26 16:51 Fabio Estevam [this message]
2013-12-26 16:51 ` [U-Boot] [PATCH v2 2/6] mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages Fabio Estevam
2014-01-02 16:18 ` Stefano Babic
2013-12-26 16:51 ` [U-Boot] [PATCH v2 3/6] mx6: soc: Set the VDDSOC at 1.175 V Fabio Estevam
2014-01-02 16:19 ` Stefano Babic
2013-12-26 16:51 ` [U-Boot] [PATCH v2 4/6] mx6: soc: Introduce set_ldo_voltage() Fabio Estevam
2014-01-02 16:20 ` Stefano Babic
2013-12-26 16:51 ` [U-Boot] [PATCH v2 5/6] mx6: soc: Add the required LDO ramp up delay Fabio Estevam
2014-01-02 16:20 ` Stefano Babic
2013-12-26 16:51 ` [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator Fabio Estevam
2014-01-02 16:21 ` Stefano Babic
2014-01-09 17:50 ` Otavio Salvador
2014-01-09 19:06 ` Fabio Estevam
2014-01-09 19:11 ` Otavio Salvador
2014-01-09 19:13 ` Fabio Estevam
2014-01-09 19:30 ` Fabio Estevam
2014-01-09 19:39 ` Otavio Salvador
2014-01-09 20:34 ` Fabio Estevam
2014-01-09 21:31 ` Stefano Babic
2014-01-15 17:12 ` Otavio Salvador
2014-01-15 17:33 ` Stefano Babic
2014-01-16 8:40 ` Pierre Aubert
2014-01-16 11:19 ` Fabio Estevam
2014-01-16 11:25 ` Pierre AUBERT
2014-01-02 16:21 ` [U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc() Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388076695-28174-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.