From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Markus Pargmann <mpa@pengutronix.de>,
Laxman Dewangan <ldewangan@nvidia.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] regulator: tps65910: Simplify setting enable_mask for regulators
Date: Sat, 28 Dec 2013 11:02:35 +0800 [thread overview]
Message-ID: <1388199755.8941.0.camel@phoenix> (raw)
BBCH_BBCHEN_MASK is equivalent to TPS65910_SUPPLY_STATE_ENABLED.
So all regulators have the same enable_mask setting.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/tps65910-regulator.c | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 979ea0a..f50dd84 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1207,21 +1207,7 @@ static int tps65910_probe(struct platform_device *pdev)
pmic->desc[i].type = REGULATOR_VOLTAGE;
pmic->desc[i].owner = THIS_MODULE;
pmic->desc[i].enable_reg = pmic->get_ctrl_reg(i);
-
- switch (i) {
- case TPS65910_REG_VBB:
- if (tps65910_chip_id(tps65910) == TPS65910)
- pmic->desc[i].enable_mask = BBCH_BBCHEN_MASK;
- else
- pmic->desc[i].enable_mask =
- TPS65910_SUPPLY_STATE_ENABLED;
- break;
-
- default:
- pmic->desc[i].enable_mask =
- TPS65910_SUPPLY_STATE_ENABLED;
- break;
- }
+ pmic->desc[i].enable_mask = TPS65910_SUPPLY_STATE_ENABLED;
config.dev = tps65910->dev;
config.init_data = reg_data;
--
1.8.1.2
next reply other threads:[~2013-12-28 3:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-28 3:02 Axel Lin [this message]
2013-12-28 17:03 ` [PATCH] regulator: tps65910: Simplify setting enable_mask for regulators Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388199755.8941.0.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpa@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.