From mboxrd@z Thu Jan 1 00:00:00 1970 From: diab Date: Mon, 04 Oct 2004 08:39:43 +0000 Subject: Re: [LARTC] limited upload speed Message-Id: <138870407.20041004103943@diab.org> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org we're doing it over the eth0.. i mean anything that comes from eth1 (upload) is shaped on eth0 when it would leave the router/shaper, and downloads (coming in on eth0) are shaped when it gets router to the users on eth1. Both are using HTB and it works just perfectly fine. -diab - diab et> What is best way to be limited upload speed from LAN users. I read et> that it is possible to be done with IMQ interface or with limitation et> over gateway interface of router(eth0 in my "scheme"), but i cannot et> chose what is preferred way and need from advice. et> Please for advise, any example scripts or URL with tutorial are welcome :) et> I read couple times Linux Traffic Control. et> ----------------------------- et> Internet ISP --------| eth0 eth1 |------- LOCAL LAN et> ----------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/