From: Axel Lin <axel.lin@ingics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] spi: oc_tiny_spi: Refactor to simplify spi_xfer implementation
Date: Fri, 10 Jan 2014 16:08:08 +0800 [thread overview]
Message-ID: <1389341288.25856.2.camel@phoenix> (raw)
Currently we have similar code for (txp && rxp), (txp && !rxp), (!rxp & txp),
and (!txp && !rxp) cases. This patch refactors the code a bit to avoid
duplicate similar code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Thomas,
This path is similar to the patch I sent for spi-oc-tiny.c linux driver.
I'd appreciate if you can review and test this patch.
Regards,
Axel
drivers/spi/oc_tiny_spi.c | 85 ++++++-----------------------------------------
1 file changed, 11 insertions(+), 74 deletions(-)
diff --git a/drivers/spi/oc_tiny_spi.c b/drivers/spi/oc_tiny_spi.c
index 4de5d00..a8c1dfd 100644
--- a/drivers/spi/oc_tiny_spi.c
+++ b/drivers/spi/oc_tiny_spi.c
@@ -158,85 +158,22 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
spi_cs_activate(slave);
/* we need to tighten the transfer loop */
- if (txp && rxp) {
- writeb(*txp++, ®s->txdata);
- if (bytes > 1) {
- writeb(*txp++, ®s->txdata);
- for (i = 2; i < bytes; i++) {
- u8 rx, tx = *txp++;
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
+ writeb(txp ? *txp++ : CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
+ for (i = 1; i < bytes; i++) {
+ writeb(txp ? *txp++ : CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
+
+ if (rxp || (i != bytes - 1)) {
+ while (!(readb(®s->status) & TINY_SPI_STATUS_TXR))
;
- rx = readb(®s->txdata);
- writeb(tx, ®s->txdata);
- *rxp++ = rx;
- }
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
- ;
- *rxp++ = readb(®s->txdata);
}
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXE))
- ;
- *rxp++ = readb(®s->rxdata);
- } else if (rxp) {
- writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
- if (bytes > 1) {
- writeb(CONFIG_TINY_SPI_IDLE_VAL,
- ®s->txdata);
- for (i = 2; i < bytes; i++) {
- u8 rx;
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
- ;
- rx = readb(®s->txdata);
- writeb(CONFIG_TINY_SPI_IDLE_VAL,
- ®s->txdata);
- *rxp++ = rx;
- }
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
- ;
+
+ if (rxp)
*rxp++ = readb(®s->txdata);
- }
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXE))
+ }
+ while (!(readb(®s->status) & TINY_SPI_STATUS_TXE))
;
+ if (rxp)
*rxp++ = readb(®s->rxdata);
- } else if (txp) {
- writeb(*txp++, ®s->txdata);
- if (bytes > 1) {
- writeb(*txp++, ®s->txdata);
- for (i = 2; i < bytes; i++) {
- u8 tx = *txp++;
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
- ;
- writeb(tx, ®s->txdata);
- }
- }
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXE))
- ;
- } else {
- writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
- if (bytes > 1) {
- writeb(CONFIG_TINY_SPI_IDLE_VAL,
- ®s->txdata);
- for (i = 2; i < bytes; i++) {
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXR))
- ;
- writeb(CONFIG_TINY_SPI_IDLE_VAL,
- ®s->txdata);
- }
- }
- while (!(readb(®s->status) &
- TINY_SPI_STATUS_TXE))
- ;
- }
-
done:
if (flags & SPI_XFER_END)
spi_cs_deactivate(slave);
--
1.8.1.2
next reply other threads:[~2014-01-10 8:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-10 8:08 Axel Lin [this message]
2014-03-02 18:43 ` [U-Boot] [PATCH] spi: oc_tiny_spi: Refactor to simplify spi_xfer implementation Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389341288.25856.2.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.