From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <linux-usb@vger.kernel.org>
Cc: <sarah.a.sharp@linux.intel.com>, <dan.j.williams@intel.com>,
<linux-kernel@vger.kernel.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [RFC 01/10] xhci: Use command structures when calling xhci_configure_endpoint
Date: Mon, 13 Jan 2014 17:05:50 +0200 [thread overview]
Message-ID: <1389625559-32414-2-git-send-email-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <1389625559-32414-1-git-send-email-mathias.nyman@linux.intel.com>
To create a global command queue we need to fill a command structure
for each entry on the command ring.
We start by requiring xhci_configure_endpoint() to be called with
a proper command structure. Functions xhci_check_maxpacket and xhci_check_bandwith
that called xhci_configure_endpoint without a command strucure are fixed.
A special case where an endpoint needs to be configured after reset, done in interrupt
context is also changed to create a command strucure. (this command
structure is not used yet, but will be later when we requre all queued commands
to have a command strucure)
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 10 ++---
drivers/usb/host/xhci.c | 95 +++++++++++++++++++++++---------------------
2 files changed, 54 insertions(+), 51 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e2f3f4..da83a844 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1180,12 +1180,15 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
* because the HW can't handle two commands being queued in a row.
*/
if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+ struct xhci_command *command;
+ command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Queueing configure endpoint command");
xhci_queue_configure_endpoint(xhci,
xhci->devs[slot_id]->in_ctx->dma, slot_id,
false);
xhci_ring_cmd_db(xhci);
+ kfree(command);
} else {
/* Clear our internal halted state and restart the ring(s) */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
@@ -1439,7 +1442,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
add_flags - SLOT_FLAG == drop_flags) {
ep_state = virt_dev->eps[ep_index].ep_state;
if (!(ep_state & EP_HALTED))
- goto bandwidth_change;
+ return;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Completed config ep cmd - "
"last ep index = %d, state = %d",
@@ -1449,11 +1452,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
-bandwidth_change:
- xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
- "Completed config ep cmd");
- virt_dev->cmd_status = cmd_comp_code;
- complete(&virt_dev->cmd_completion);
return;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 4265b48..5e65052 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1179,10 +1179,10 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, struct urb *urb)
{
- struct xhci_container_ctx *in_ctx;
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_command *command;
int max_packet_size;
int hw_max_packet_size;
int ret = 0;
@@ -1207,18 +1207,24 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
/* FIXME: This won't work if a non-default control endpoint
* changes max packet sizes.
*/
- in_ctx = xhci->devs[slot_id]->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+
+ command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ command->in_ctx = xhci->devs[slot_id]->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto command_cleanup;
}
/* Set up the modified control endpoint 0 */
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
xhci->devs[slot_id]->out_ctx, ep_index);
- ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
@@ -1226,16 +1232,20 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Slot %d input context\n", slot_id);
- xhci_dbg_ctx(xhci, in_ctx, ep_index);
+ xhci_dbg_ctx(xhci, command->in_ctx, ep_index);
xhci_dbg(xhci, "Slot %d output context\n", slot_id);
xhci_dbg_ctx(xhci, out_ctx, ep_index);
- ret = xhci_configure_endpoint(xhci, urb->dev, NULL,
+ ret = xhci_configure_endpoint(xhci, urb->dev, command,
true, false);
/* Clean up the input context for later use by bandwidth
* functions.
*/
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
+
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
}
return ret;
@@ -2568,21 +2578,16 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
int ret;
int timeleft;
unsigned long flags;
- struct xhci_container_ctx *in_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
- struct completion *cmd_completion;
- u32 *cmd_status;
struct xhci_virt_device *virt_dev;
- union xhci_trb *cmd_trb;
spin_lock_irqsave(&xhci->lock, flags);
virt_dev = xhci->devs[udev->slot_id];
- if (command)
- in_ctx = command->in_ctx;
- else
- in_ctx = virt_dev->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!command)
+ return -EINVAL;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
@@ -2599,7 +2604,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
return -ENOMEM;
}
if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
- xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
+ xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) {
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -2607,27 +2612,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
return -ENOMEM;
}
- if (command) {
- cmd_completion = command->completion;
- cmd_status = &command->status;
- command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
- list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
- } else {
- cmd_completion = &virt_dev->cmd_completion;
- cmd_status = &virt_dev->cmd_status;
- }
- init_completion(cmd_completion);
+ command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
+ list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
- cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
if (!ctx_change)
- ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
+ ret = xhci_queue_configure_endpoint(xhci, command->in_ctx->dma,
udev->slot_id, must_succeed);
else
- ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
+ ret = xhci_queue_evaluate_context(xhci, command->in_ctx->dma,
udev->slot_id, must_succeed);
if (ret < 0) {
- if (command)
- list_del(&command->cmd_list);
+ list_del(&command->cmd_list);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -2640,7 +2635,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
/* Wait for the configure endpoint command to complete */
timeleft = wait_for_completion_interruptible_timeout(
- cmd_completion,
+ command->completion,
XHCI_CMD_DEFAULT_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for %s command\n",
@@ -2649,16 +2644,18 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
"configure endpoint" :
"evaluate context");
/* cancel the configure endpoint command */
- ret = xhci_cancel_cmd(xhci, command, cmd_trb);
+ ret = xhci_cancel_cmd(xhci, command, command->command_trb);
if (ret < 0)
return ret;
return -ETIME;
}
if (!ctx_change)
- ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
+ ret = xhci_configure_endpoint_result(xhci, udev,
+ &command->status);
else
- ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
+ ret = xhci_evaluate_context_result(xhci, udev,
+ &command->status);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
spin_lock_irqsave(&xhci->lock, flags);
@@ -2692,6 +2689,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_virt_device *virt_dev;
struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_slot_ctx *slot_ctx;
+ struct xhci_command *command;
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
if (ret <= 0)
@@ -2703,12 +2701,16 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
virt_dev = xhci->devs[udev->slot_id];
+ command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ command->in_ctx = virt_dev->in_ctx;
+
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto command_cleanup;
}
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
@@ -2716,20 +2718,20 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
/* Don't issue the command if there's no endpoints to update. */
if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
- ctrl_ctx->drop_flags == 0)
- return 0;
-
+ ctrl_ctx->drop_flags == 0) {
+ ret = 0;
+ goto command_cleanup;
+ }
xhci_dbg(xhci, "New Input Control Context:\n");
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
- ret = xhci_configure_endpoint(xhci, udev, NULL,
+ ret = xhci_configure_endpoint(xhci, udev, command,
false, false);
- if (ret) {
+ if (ret)
/* Callee should call reset_bandwidth() */
- return ret;
- }
+ goto command_cleanup;
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
xhci_dbg_ctx(xhci, virt_dev->out_ctx,
@@ -2758,6 +2760,9 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
virt_dev->eps[i].new_ring = NULL;
}
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
return ret;
}
--
1.8.1.2
next prev parent reply other threads:[~2014-01-13 14:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-13 15:05 [RFC 00/10] xhci: re-work command queue management Mathias Nyman
2014-01-13 15:05 ` Mathias Nyman [this message]
2014-01-13 15:05 ` [RFC 02/10] xhci: use a command structure internally in xhci_address_device() Mathias Nyman
2014-01-13 15:05 ` [RFC 03/10] xhci: use command structures for xhci_queue_slot_control() Mathias Nyman
2014-01-13 15:05 ` [RFC 04/10] xhci: use command structures for xhci_queue_stop_endpoint() Mathias Nyman
2014-01-13 15:05 ` [RFC 05/10] xhci: use command structure for xhci_queue_new_dequeue_state() Mathias Nyman
2014-01-13 15:05 ` [RFC 06/10] xhci: use command structures for xhci_queue_reset_ep() Mathias Nyman
2014-01-13 15:05 ` [RFC 07/10] xhci: Use command structured when queuing commands Mathias Nyman
2014-01-13 15:05 ` [RFC 08/10] xhci: Add a global command queue Mathias Nyman
2014-01-13 15:05 ` [RFC 09/10] xhci: Use completion and status in " Mathias Nyman
2014-01-13 15:05 ` [RFC 10/10] xhci: rework command timeout and cancellation, Mathias Nyman
2014-01-13 16:58 ` [RFC 00/10] xhci: re-work command queue management David Laight
2014-01-14 12:05 ` Mathias Nyman
2014-01-14 12:37 ` David Laight
2014-01-15 15:43 ` Mathias Nyman
2014-01-27 23:58 ` Sarah Sharp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389625559-32414-2-git-send-email-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.