Re: Surround sound not working on ALC887 based motherboard

["Olivier Crête" <olivier.crete@ocrete.ca>]

Hi,

On Mon, 2014-01-13 at 18:16 +0800, Raymond Yau wrote:

> 2014/1/10 Olivier Crête <olivier.crete@ocrete.ca>
>         I have a Asus P5G41T-M LX Plus motherboard which is ICH7 +
>         Realtek
>         ALC887-VD, alsa only lets me access the first 2 channels
>         (stereo), but
>         not the 6 other ones. It works fine in Windows.
>         
>         Trying to run this after killing pulseaudio fails:
>         
>         $ aplay -D surround40:0 -f S16_LE -r 44100 -c 4 /dev/zero -v
>         Playing raw data '/dev/zero' : Signed 16 bit Little Endian,
>         Rate 44100 Hz, Channels 4
>         aplay: set_params:1239: Channels count non available
>         
>         
>         Output from alsa-info:
>         http://www.alsa-project.org/db/?f=fe378d28f0dbb5a427b005d20866a762fd37d31a

> 
> post output of pactl list or pulseaudio verbose log 

http://www.ocrete.ca/surround/pactl-list.txt
http://www.ocrete.ca/surround/pulseaudio-vv.txt

> you have to change channel mode from 2ch to 6ch to retask the input
> jacks as output if your motherboard only have three audio jacks at
> rear panel 

How would one do that ? Pulseaudio only offers Stereo profiles.

> do you mean pulseaudio cannot probe the surroun40 or surround51
> profile ?

Yes, but I can't use it with aplay even without pulseaudio running.

> Simple mixer control 'Channel Mode',0
>   Capabilities: enum
>   Items: '2ch' '4ch' '6ch'
>   Item0: '2ch'


-- 
Olivier Crête
olivier.crete@ocrete.ca

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel