From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 7/3] drm/i915: remove wait_for_vblank argument form intel_enable_pipe
Date: Fri, 17 Jan 2014 13:51:12 -0200 [thread overview]
Message-ID: <1389973873-2005-4-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1389973873-2005-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Add a nice comment explaining why we shouldn't wait for a vblank on
all cases, wait based on the HW gen, and add a comment saying we
should probably skip that wait on some of the previous HW gens.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b110da8..9f356f9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1745,12 +1745,11 @@ static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
/**
* intel_enable_pipe - enable a pipe, asserting requirements
* @crtc: crtc responsible for the pipe
- * @wait_for_vblank: whether we should for a vblank or not after enabling it
*
* Enable @crtc's pipe, making sure that various hardware specific requirements
* are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
*/
-static void intel_enable_pipe(struct intel_crtc *crtc, bool wait_for_vblank)
+static void intel_enable_pipe(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1797,7 +1796,15 @@ static void intel_enable_pipe(struct intel_crtc *crtc, bool wait_for_vblank)
I915_WRITE(reg, val | PIPECONF_ENABLE);
POSTING_READ(reg);
- if (wait_for_vblank)
+
+ /*
+ * There's no guarantee the pipe will really start running now. It
+ * depends on the Gen, the output type and the relative order between
+ * pipe and plane enabling. Avoid waiting on HSW+ since it's not
+ * necessary.
+ * TODO: audit the previous gens.
+ */
+ if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
intel_wait_for_vblank(dev_priv->dev, pipe);
}
@@ -3561,7 +3568,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, true);
+ intel_enable_pipe(intel_crtc);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
intel_crtc_update_cursor(crtc, true);
@@ -3706,7 +3713,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_ddi_enable_transcoder_func(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, false);
+ intel_enable_pipe(intel_crtc);
if (intel_crtc->config.has_pch_encoder)
lpt_pch_enable(crtc);
@@ -4131,7 +4138,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, true);
+ intel_enable_pipe(intel_crtc);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
intel_crtc_update_cursor(crtc, true);
@@ -4169,7 +4176,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, true);
+ intel_enable_pipe(intel_crtc);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
/* The fixup needs to happen before cursor is enabled */
--
1.8.4.2
next prev parent reply other threads:[~2014-01-17 15:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-19 21:12 [PATCH 1/3] drm/i915: add wait_for_vblank argument to intel_enable_pipe Paulo Zanoni
2013-12-19 21:12 ` [PATCH 2/3] drm/i915: don't wait for vblank after enabling pipe on HSW Paulo Zanoni
2014-01-15 18:26 ` Jesse Barnes
2013-12-19 21:12 ` [PATCH 3/3] drm/i915: remove the vblank_wait hack from HSW+ Paulo Zanoni
2013-12-19 21:17 ` Daniel Vetter
2013-12-20 14:32 ` Paulo Zanoni
2013-12-20 22:32 ` Lee, Chon Ming
2014-01-02 16:08 ` Paulo Zanoni
2014-01-15 18:28 ` Jesse Barnes
2014-02-12 11:13 ` Ville Syrjälä
2014-02-12 11:26 ` Ville Syrjälä
2014-02-12 17:02 ` Paulo Zanoni
2014-02-12 18:06 ` Ville Syrjälä
2014-02-12 18:35 ` Paulo Zanoni
2013-12-20 6:41 ` [PATCH 1/3] drm/i915: add wait_for_vblank argument to intel_enable_pipe Jani Nikula
2014-01-15 18:25 ` Jesse Barnes
2014-01-15 23:40 ` Daniel Vetter
2014-01-17 15:46 ` Paulo Zanoni
2014-01-17 15:51 ` [PATCH 4/3] drm/i915: pass intel_crtc as argument for intel_enable_pipe Paulo Zanoni
2014-01-17 15:51 ` [PATCH 5/3] drm/i915: remove pch_port argument form intel_enable_pipe Paulo Zanoni
2014-02-10 14:17 ` Damien Lespiau
2014-01-17 15:51 ` [PATCH 6/3] drm/i915: remove "dsi" " Paulo Zanoni
2014-02-10 14:21 ` Damien Lespiau
2014-02-10 17:19 ` Daniel Vetter
2014-01-17 15:51 ` Paulo Zanoni [this message]
2014-02-10 14:33 ` [PATCH 7/3] drm/i915: remove wait_for_vblank " Damien Lespiau
2014-02-10 14:59 ` Ville Syrjälä
2014-01-17 15:51 ` [PATCH 8/3] drm/i915: WARN in case we're enabling the pipe and it's enabled Paulo Zanoni
2014-02-10 14:34 ` Damien Lespiau
2014-02-10 14:17 ` [PATCH 4/3] drm/i915: pass intel_crtc as argument for intel_enable_pipe Damien Lespiau
2014-02-10 17:23 ` Daniel Vetter
2014-02-11 15:23 ` Paulo Zanoni
2014-02-11 15:44 ` Daniel Vetter
2014-02-11 17:09 ` Paulo Zanoni
2014-02-11 17:20 ` Paulo Zanoni
2014-02-11 21:54 ` Daniel Vetter
2014-02-12 15:56 ` Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389973873-2005-4-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.