From mboxrd@z Thu Jan 1 00:00:00 1970 From: Axel Lin Subject: [PATCH] spi: sc18is602: Remove sc18is602_setup() because it is done by spi core Date: Mon, 20 Jan 2014 23:18:45 +0800 Message-ID: <1390231125.11756.1.camel@phoenix> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Cc: Guenter Roeck , linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Mark Brown Return-path: Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: The checking for spi->mode is done in the implementation of spi_setup(). Calling sc18is602_check_transfer(spi, NULL, 0) is pointless because the code is equivent to checking if spi->max_speed_hz is 0. Note, sc18is602_check_transfer actually allows spi->max_speed_hz is 0 if t->speed_hz is set. So return error in sc18is602_setup() when spi->max_speed_hz is 0 does not make sense. Signed-off-by: Axel Lin --- drivers/spi/spi-sc18is602.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 121c2e1..b3ac776 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -245,14 +245,6 @@ error: return status; } -static int sc18is602_setup(struct spi_device *spi) -{ - if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST)) - return -EINVAL; - - return sc18is602_check_transfer(spi, NULL, 0); -} - static int sc18is602_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -306,7 +298,6 @@ static int sc18is602_probe(struct i2c_client *client, master->bus_num = client->adapter->nr; master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(8); - master->setup = sc18is602_setup; master->transfer_one_message = sc18is602_transfer_one; master->dev.of_node = np; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html