From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: vinod.koul@linux.intel.com
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [TINYCOMPRESS PATCH 1/2 v3] crec: Initial version of a compressed capture utility
Date: Thu, 23 Jan 2014 17:07:35 +0000 [thread overview]
Message-ID: <1390496856-16669-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
This version only supports capture of PCM streams over a compressed
device and saves these as WAV files.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Changes since v2:
- Switched to using POSIX file IO to improve signal safety
Thanks,
Charles
Android.mk | 10 ++
crec.c | 418 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
makefile.linux | 20 ++-
3 files changed, 441 insertions(+), 7 deletions(-)
create mode 100644 crec.c
diff --git a/Android.mk b/Android.mk
index 104dfef..3cdd3d0 100644
--- a/Android.mk
+++ b/Android.mk
@@ -20,3 +20,13 @@ LOCAL_MODULE_TAGS := optional
include $(BUILD_EXECUTABLE)
+include $(CLEAR_VARS)
+
+LOCAL_C_INCLUDES:= $(LOCAL_PATH)/include
+LOCAL_SRC_FILES:= crec.c
+LOCAL_MODULE := crec
+LOCAL_SHARED_LIBRARIES:= libcutils libutils libtinycompress
+LOCAL_MODULE_TAGS := optional
+
+include $(BUILD_EXECUTABLE)
+
diff --git a/crec.c b/crec.c
new file mode 100644
index 0000000..df53e4e
--- /dev/null
+++ b/crec.c
@@ -0,0 +1,418 @@
+/*
+ * BSD LICENSE
+ *
+ * crec command line recorder for compress audio record in alsa
+ * Copyright (c) 2011-2012, Intel Corporation
+ * Copyright (c) 2013-2014, Wolfson Microelectronic Ltd.
+ * All rights reserved.
+ *
+ * Author: Vinod Koul <vinod.koul@linux.intel.com>
+ * Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * Neither the name of Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * LGPL LICENSE
+ *
+ * crec command line recorder for compress audio record in alsa
+ * Copyright (c) 2011-2012, Intel Corporation
+ * Copyright (c) 2013-2014, Wolfson Microelectronic Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU Lesser General Public License,
+ * version 2.1, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to
+ * the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdint.h>
+#include <linux/types.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <getopt.h>
+#include <sys/time.h>
+#define __force
+#define __bitwise
+#define __user
+#include "sound/compress_params.h"
+#include "sound/compress_offload.h"
+#include "tinycompress/tinycompress.h"
+
+static int verbose;
+
+static const unsigned int DEFAULT_CHANNELS = 1;
+static const unsigned int DEFAULT_RATE = 44100;
+static const unsigned int DEFAULT_FORMAT = SNDRV_PCM_FORMAT_S16_LE;
+
+struct riff_chunk {
+ char desc[4];
+ uint32_t size;
+} __attribute__((__packed__));
+
+struct wave_header {
+ struct {
+ struct riff_chunk chunk;
+ char format[4];
+ } __attribute__((__packed__)) riff;
+
+ struct {
+ struct riff_chunk chunk;
+ uint16_t type;
+ uint16_t channels;
+ uint32_t rate;
+ uint32_t byterate;
+ uint16_t blockalign;
+ uint16_t samplebits;
+ } __attribute__((__packed__)) fmt;
+
+ struct {
+ struct riff_chunk chunk;
+ } __attribute__((__packed__)) data;
+} __attribute__((__packed__));
+
+const struct wave_header blank_wave_header = {
+ .riff = {
+ .chunk = {
+ .desc = "RIFF",
+ },
+ .format = "WAVE",
+ },
+ .fmt = {
+ .chunk = {
+ .desc = "fmt ", /* Note the space is important here */
+ .size = sizeof(blank_wave_header.fmt) -
+ sizeof(blank_wave_header.fmt.chunk),
+ },
+ .type = 0x01, /* PCM */
+ },
+ .data = {
+ .chunk = {
+ .desc = "data",
+ },
+ },
+};
+
+static void init_wave_header(struct wave_header *header, uint16_t channels,
+ uint32_t rate, uint16_t samplebits)
+{
+ memcpy(header, &blank_wave_header, sizeof(blank_wave_header));
+
+ header->fmt.channels = channels;
+ header->fmt.rate = rate;
+ header->fmt.byterate = channels * rate * (samplebits / 8);
+ header->fmt.blockalign = channels * (samplebits / 8);
+ header->fmt.samplebits = samplebits;
+}
+
+static void size_wave_header(struct wave_header *header, uint32_t size)
+{
+ header->riff.chunk.size = sizeof(*header) -
+ sizeof(header->riff.chunk) + size;
+ header->data.chunk.size = size;
+}
+
+static void usage(void)
+{
+ fprintf(stderr, "usage: crec [OPTIONS] filename\n"
+ "-c\tcard number\n"
+ "-d\tdevice node\n"
+ "-b\tbuffer size\n"
+ "-f\tfragments\n"
+ "-v\tverbose mode\n"
+ "-l\tlength of record in seconds\n"
+ "-h\tPrints this help list\n\n"
+ "-C\tSpecify the number of channels (default %u)\n"
+ "-R\tSpecify the sample rate (default %u)\n"
+ "-F\tSpecify the format: S16_LE, S32_LE (default S16_LE)\n\n"
+ "Example:\n"
+ "\tcrec -c 1 -d 2 test.wav\n"
+ "\tcrec -f 5 test.wav\n",
+ DEFAULT_CHANNELS, DEFAULT_RATE);
+
+ exit(EXIT_FAILURE);
+}
+
+static int print_time(struct compress *compress)
+{
+ unsigned int avail;
+ struct timespec tstamp;
+
+ if (compress_get_hpointer(compress, &avail, &tstamp) != 0) {
+ fprintf(stderr, "Error querying timestamp\n");
+ fprintf(stderr, "ERR: %s\n", compress_get_error(compress));
+ return -1;
+ } else {
+ printf("DSP recorded %jd.%jd\n",
+ (intmax_t)tstamp.tv_sec, (intmax_t)tstamp.tv_nsec*1000);
+ }
+ return 0;
+}
+
+void capture_samples(char *name, unsigned int card, unsigned int device,
+ unsigned long buffer_size, unsigned int frag,
+ unsigned int length, unsigned int rate,
+ unsigned int channels, unsigned int format)
+{
+ struct compr_config config;
+ struct snd_codec codec;
+ struct compress *compress;
+ struct wave_header header;
+ int file;
+ char *buffer;
+ size_t written;
+ int read, ret;
+ unsigned int size, total_read = 0;
+ unsigned int samplebits;
+
+ switch (format) {
+ case SNDRV_PCM_FORMAT_S32_LE:
+ samplebits = 32;
+ break;
+ default:
+ samplebits = 16;
+ break;
+ }
+
+ /* Convert length from seconds to bytes */
+ length = length * rate * (samplebits / 8) * channels;
+
+ if (verbose)
+ printf("%s: entry, reading %u bytes\n", __func__, length);
+
+ file = open(name, O_WRONLY);
+ if (file == -1) {
+ fprintf(stderr, "Unable to open file '%s'\n", name);
+ exit(EXIT_FAILURE);
+ }
+
+ /* Write a header, will update with size once record is complete */
+ init_wave_header(&header, channels, rate, samplebits);
+ written = write(file, &header, sizeof(header));
+ if (written != sizeof(header)) {
+ fprintf(stderr, "Error writing output file header: %s\n",
+ strerror(errno));
+ goto file_exit;
+ }
+
+ memset(&codec, 0, sizeof(codec));
+ memset(&config, 0, sizeof(config));
+ codec.id = SND_AUDIOCODEC_PCM;
+ codec.ch_in = channels;
+ codec.ch_out = channels;
+ codec.sample_rate = rate;
+ if (!codec.sample_rate) {
+ fprintf(stderr, "invalid sample rate %d\n", rate);
+ goto file_exit;
+ }
+ codec.format = format;
+ if ((buffer_size != 0) && (frag != 0)) {
+ config.fragment_size = buffer_size/frag;
+ config.fragments = frag;
+ }
+ config.codec = &codec;
+
+ compress = compress_open(card, device, COMPRESS_OUT, &config);
+ if (!compress || !is_compress_ready(compress)) {
+ fprintf(stderr, "Unable to open Compress device %d:%d\n",
+ card, device);
+ fprintf(stderr, "ERR: %s\n", compress_get_error(compress));
+ goto file_exit;
+ };
+
+ if (verbose)
+ printf("%s: Opened compress device\n", __func__);
+
+ size = config.fragment_size;
+ buffer = malloc(size * config.fragments);
+ if (!buffer) {
+ fprintf(stderr, "Unable to allocate %d bytes\n", size);
+ goto comp_exit;
+ }
+
+ printf("Recording file %s On Card %u device %u, with buffer of %lu bytes\n",
+ name, card, device, buffer_size);
+ printf("Format %u Channels %u, %u Hz\n",
+ codec.id, codec.ch_out, rate);
+
+ compress_start(compress);
+
+ if (verbose)
+ printf("%s: Capturing audio NOW!!!\n", __func__);
+
+ do {
+ if (length && size > length - total_read)
+ size = length - total_read;
+
+ read = compress_read(compress, buffer, size);
+ if (read < 0) {
+ fprintf(stderr, "Error reading sample\n");
+ fprintf(stderr, "ERR: %s\n", compress_get_error(compress));
+ goto buf_exit;
+ }
+ if ((unsigned int)read != size) {
+ fprintf(stderr, "We read %d, DSP sent %d\n",
+ size, read);
+ }
+
+ if (read > 0) {
+ total_read += read;
+
+ written = write(file, buffer, read);
+ if (written != (size_t)read) {
+ fprintf(stderr, "Error writing output file: %s\n",
+ strerror(errno));
+ goto buf_exit;
+ }
+ if (verbose) {
+ print_time(compress);
+ printf("%s: read %d\n", __func__, read);
+ }
+ }
+ } while (!length || total_read < length);
+
+ ret = compress_stop(compress);
+ if (ret < 0) {
+ fprintf(stderr, "Error closing stream\n");
+ fprintf(stderr, "ERR: %s\n", compress_get_error(compress));
+ }
+
+ /* Update file header now we know file size */
+ size_wave_header(&header, total_read);
+ ret = lseek(file, 0, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "Error seeking: %s\n", strerror(errno));
+ goto buf_exit;
+ }
+ written = write(file, &header, sizeof(header));
+ if (written != sizeof(header)) {
+ fprintf(stderr, "Error updating output file header: %s\n",
+ strerror(errno));
+ goto buf_exit;
+ }
+
+ if (verbose)
+ printf("%s: exit success\n", __func__);
+
+ free(buffer);
+ close(file);
+
+ compress_close(compress);
+
+ return;
+buf_exit:
+ free(buffer);
+comp_exit:
+ compress_close(compress);
+file_exit:
+ close(file);
+
+ if (verbose)
+ printf("%s: exit failure\n", __func__);
+
+ exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+ char *file;
+ unsigned long buffer_size = 0;
+ int c;
+ unsigned int card = 0, device = 0, frag = 0, length = 0;
+ unsigned int rate = DEFAULT_RATE, channels = DEFAULT_CHANNELS;
+ unsigned int format = DEFAULT_FORMAT;
+
+ if (argc < 2)
+ usage();
+
+ verbose = 0;
+ while ((c = getopt(argc, argv, "hvl:R:C:F:b:f:c:d:")) != -1) {
+ switch (c) {
+ case 'h':
+ usage();
+ break;
+ case 'b':
+ buffer_size = strtol(optarg, NULL, 0);
+ break;
+ case 'f':
+ frag = strtol(optarg, NULL, 10);
+ break;
+ case 'c':
+ card = strtol(optarg, NULL, 10);
+ break;
+ case 'd':
+ device = strtol(optarg, NULL, 10);
+ break;
+ case 'v':
+ verbose = 1;
+ break;
+ case 'l':
+ length = strtol(optarg, NULL, 10);
+ break;
+ case 'R':
+ rate = strtol(optarg, NULL, 10);
+ break;
+ case 'C':
+ channels = strtol(optarg, NULL, 10);
+ break;
+ case 'F':
+ if (strcmp(optarg, "S16_LE") == 0) {
+ format = SNDRV_PCM_FORMAT_S16_LE;
+ } else if (strcmp(optarg, "S32_LE") == 0) {
+ format = SNDRV_PCM_FORMAT_S32_LE;
+ } else {
+ fprintf(stderr, "Unrecognised format: %s\n",
+ optarg);
+ usage();
+ }
+ break;
+ default:
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (optind >= argc)
+ usage();
+
+ file = argv[optind];
+
+ capture_samples(file, card, device, buffer_size, frag, length,
+ rate, channels, format);
+
+ printf("Finish capturing... Close Normally\n");
+ exit(EXIT_SUCCESS);
+}
+
diff --git a/makefile.linux b/makefile.linux
index 677878d..81782d0 100644
--- a/makefile.linux
+++ b/makefile.linux
@@ -1,10 +1,13 @@
LIB = libtinycompress
-BIN = cplay
VER = 0.1
LIBSRC = compress.c
-SRC = cplay.c utils.c
+PLAYBIN = cplay
+RECBIN = crec
+PLAYSRC = cplay.c utils.c
+RECSRC = crec.c utils.c
LIBOBJ = ${LIBSRC:.c=.o}
-OBJ = ${SRC:.c=.o}
+PLAYOBJ = ${PLAYSRC:.c=.o}
+RECOBJ = ${RECSRC:.c=.o}
CC = gcc
CROSS_COMPILE =
@@ -13,23 +16,26 @@ CFLAGS += -std=c99 -Wall -Wextra -Wunused -DVERSION=\"${VER}\" -I./include
LDFLAGS += -L. -ltinycompress
LIBLDFLAGS = -lasound
-all: libtinycompress cplay
+all: libtinycompress cplay crec
$(LIB): ${LIBOBJ}
@echo " LD "$@
@${CROSS_COMPILE}${CC} ${CFLAGS} -shared -Wl,-soname,$@.so -o $@.so ${LIBOBJ} ${LIBLDFLAGS}
-$(BIN): ${OBJ} ${LIB}
+$(PLAYBIN): ${PLAYOBJ} ${LIB}
@echo " LD "$@
- @${CROSS_COMPILE}${CC} ${CFLAGS} -o $@ ${OBJ} ${LDFLAGS}
+ @${CROSS_COMPILE}${CC} ${CFLAGS} -o $@ ${PLAYOBJ} ${LDFLAGS}
+$(RECBIN): ${RECOBJ} ${LIB}
+ @echo " LD "$@
+ @${CROSS_COMPILE}${CC} ${CFLAGS} -o $@ ${RECOBJ} ${LDFLAGS}
%.o: %.c
@echo " CC "$<
@${CROSS_COMPILE}${CC} ${CFLAGS} -c -fPIC -o $@ $<
clean:
- @rm -rf ${BIN} ${OBJ} ${LIB}.so ${LIBOBJ}
+ @rm -rf ${BIN} ${PLAYOBJ} ${RECOBJ} ${LIB}.so ${LIBOBJ}
.PHONY: all clean
--
1.7.2.5
next reply other threads:[~2014-01-23 17:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-23 17:07 Charles Keepax [this message]
2014-01-23 17:07 ` [TINYCOMPRESS PATCH 2/2 v3] crec: Add primitive exception handling Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390496856-16669-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=vinod.koul@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.