From: Misbah khan <misbah_khan@engineer.com>
To: linuxppc-embedded@ozlabs.org
Subject: Re: Firmware Support for USB Hub
Date: Fri, 23 Nov 2007 00:45:51 -0800 (PST) [thread overview]
Message-ID: <13908701.post@talk.nabble.com> (raw)
In-Reply-To: <13877282.post@talk.nabble.com>
This is the reply that i got from the Freescale :-
--------------------------------------------------------------------------
Reply from Freescale
In reply to your Service Request SR 1-403672820:
We recommend using the MPC8272 USB controller.
We know that customers use the MPC8272/MPC8248 USB controller.
You can find also USB drivers in Linux software for the MPC8272.
For example Linux BSP for Freescale MPC8272ADS contains USB slave
driver
(http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=0127260061033202A5).
Linux USB driver is available in the Arabella Linux
(http://www.arabellasw.com/products-pow2.php).
If the MPC8272 is USB host, the transaction-level interface can be used.
Note: The MPC8272 USB does not support high-speed mode. It can
operate on low-speed mode (1.5MHz) or full-speed mode (12MHz).
------------------------------------------------------------------------------------------
Can any body comment on this and help me how to start with and requirement
is this :-
I need a USB Hub to be connected to the PPC8248 board with Montavista Linux
2.6.10
on it what shall i do to achive it ....????The challenges you already know
Hoping for the the Help ...
Misbah khan wrote:
>
> Hi all,
>
> I am using a 8248 processor which has a USB controller and i need to
> connect a USB Hub to it, iam using Montavista Linux .I need to know that
> what are the support i need form Montavista or Open source to have an
> interface with Usb hub. ???
>
> Is there any driver that we need to make if so what type ???
>
> --misbah <><
>
--
View this message in context: http://www.nabble.com/Firmware-Support-for-USB-Hub-tf4850180.html#a13908701
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-11-23 8:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-21 13:45 Firmware Support for USB Hub Misbah khan
2007-11-21 17:20 ` Scott Wood
2007-11-21 17:29 ` Laurent Pinchart
2007-11-22 10:27 ` Misbah khan
2007-11-22 11:16 ` Clemens Koller
2007-11-22 9:53 ` Misbah khan
2007-11-23 8:45 ` Misbah khan [this message]
2007-11-23 12:23 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13908701.post@talk.nabble.com \
--to=misbah_khan@engineer.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.