From: Eric Leblond <eric@regit.org>
To: pablo@netfilter.org
Cc: netfilter-devel@vger.kernel.org, Eric Leblond <eric@regit.org>
Subject: [nftables RFC PATCH] icmp: add code filtering with name
Date: Mon, 10 Feb 2014 13:33:25 +0100 [thread overview]
Message-ID: <1392035605-2889-2-git-send-email-eric@regit.org> (raw)
In-Reply-To: <1392035605-2889-1-git-send-email-eric@regit.org>
This patch define names for code field allowing to use string
instead of integer when filtering on icmp code.
Signed-off-by: Eric Leblond <eric@regit.org>
---
include/datatype.h | 2 ++
src/proto.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/include/datatype.h b/include/datatype.h
index 9e609cf..033ae08 100644
--- a/include/datatype.h
+++ b/include/datatype.h
@@ -34,6 +34,7 @@
* @TYPE_CT_DIR: conntrack direction
* @TYPE_CT_STATUS: conntrack status (bitmask subtype)
* @TYPE_ICMP6_TYPE: ICMPv6 type codes (integer subtype)
+ * @TYPE_ICMP_CODE: ICMP code codes (integer subtype)
*/
enum datatypes {
TYPE_INVALID,
@@ -66,6 +67,7 @@ enum datatypes {
TYPE_CT_DIR,
TYPE_CT_STATUS,
TYPE_ICMP6_TYPE,
+ TYPE_ICMP_CODE,
__TYPE_MAX
};
#define TYPE_MAX (__TYPE_MAX - 1)
diff --git a/src/proto.c b/src/proto.c
index cc073af..bb56766 100644
--- a/src/proto.c
+++ b/src/proto.c
@@ -315,12 +315,52 @@ static const struct datatype icmp_type_type = {
#define ICMPHDR_TYPE(__name, __type, __member) \
HDR_TYPE(__name, __type, struct icmphdr, __member)
+static const struct symbol_table icmp_code_tbl = {
+ .symbols = {
+ SYMBOL("network-unreachable", ICMP_NET_UNREACH),
+ SYMBOL("host-unreachable", ICMP_HOST_UNREACH),
+ SYMBOL("protocol-unreachable", ICMP_PROT_UNREACH),
+ SYMBOL("port-unreachable", ICMP_PORT_UNREACH),
+ SYMBOL("fragmentation-needed", ICMP_FRAG_NEEDED),
+ SYMBOL("source-route-failed", ICMP_SR_FAILED),
+ SYMBOL("network-unknown", ICMP_NET_UNKNOWN),
+ SYMBOL("host-unknown", ICMP_HOST_UNKNOWN),
+ SYMBOL("host-isolated", ICMP_HOST_ISOLATED),
+ SYMBOL("network-prohibited", ICMP_NET_ANO),
+ SYMBOL("host-prohibited", ICMP_HOST_ANO),
+ SYMBOL("TOS-network-unreachable", ICMP_NET_UNR_TOS),
+ SYMBOL("TOS-host-unreachable", ICMP_HOST_UNR_TOS),
+ SYMBOL("communication-prohibited", ICMP_PKT_FILTERED),
+ SYMBOL("host-precedence-violation", ICMP_PREC_VIOLATION),
+ SYMBOL("precedence-cutoff", ICMP_PREC_CUTOFF),
+
+ SYMBOL("network-redirect", ICMP_REDIR_NET),
+ SYMBOL("host-redirect", ICMP_REDIR_HOST),
+ SYMBOL("network-redirect-tos", ICMP_REDIR_NETTOS),
+ SYMBOL("host-redirect-tos", ICMP_REDIR_HOSTTOS),
+
+ SYMBOL("ttl-exceeded", ICMP_EXC_TTL),
+ SYMBOL("fragtime-exceeded", ICMP_EXC_FRAGTIME),
+ SYMBOL_LIST_END
+ },
+};
+
+static const struct datatype icmp_code_type = {
+ .type = TYPE_ICMP_CODE,
+ .name = "icmp_code",
+ .desc = "ICMP code",
+ .byteorder = BYTEORDER_BIG_ENDIAN,
+ .size = BITS_PER_BYTE,
+ .basetype = &integer_type,
+ .sym_tbl = &icmp_code_tbl,
+};
+
const struct proto_desc proto_icmp = {
.name = "icmp",
.base = PROTO_BASE_TRANSPORT_HDR,
.templates = {
[ICMPHDR_TYPE] = ICMPHDR_TYPE("type", &icmp_type_type, type),
- [ICMPHDR_CODE] = ICMPHDR_FIELD("code", code),
+ [ICMPHDR_CODE] = ICMPHDR_TYPE("code", &icmp_code_type, code),
[ICMPHDR_CHECKSUM] = ICMPHDR_FIELD("checksum", checksum),
[ICMPHDR_ID] = ICMPHDR_FIELD("id", un.echo.id),
[ICMPHDR_SEQ] = ICMPHDR_FIELD("sequence", un.echo.sequence),
@@ -806,6 +846,7 @@ const struct proto_desc proto_eth = {
static void __init proto_init(void)
{
datatype_register(&icmp_type_type);
+ datatype_register(&icmp_code_type);
datatype_register(&tcp_flag_type);
datatype_register(&dccp_pkttype_type);
datatype_register(&arpop_type);
--
1.9.0.rc3
next prev parent reply other threads:[~2014-02-10 12:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 12:33 [nftables RFC PATCH 0/1] implementing icmp code filtering Eric Leblond
2014-02-10 12:33 ` Eric Leblond [this message]
2014-02-10 13:12 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392035605-2889-2-git-send-email-eric@regit.org \
--to=eric@regit.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=pablo@netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.