From: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Laxman Dewangan
<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/3] spi: tegra20-sflash: Convert to use master->max_speed_hz
Date: Mon, 10 Feb 2014 21:49:49 +0800 [thread overview]
Message-ID: <1392040189.4191.3.camel@phoenix> (raw)
In-Reply-To: <1392040096.4191.1.camel@phoenix>
Use master->max_speed_hz instead of tspi->spi_max_frequency, so spi core will
handle checking transfer speed.
In additional, since commit 052eb2d49006 'spi: core: Set max_speed_hz of
spi_device default to max_speed_hz of controller',
spi core will also set default spi->max_speed_hz if it is not set.
So remove tegra_sflash_setup().
Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
drivers/spi/spi-tegra20-sflash.c | 24 +++---------------------
1 file changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 18037ab..5db73c0 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -120,7 +120,6 @@ struct tegra_sflash_data {
struct reset_control *rst;
void __iomem *base;
unsigned irq;
- u32 spi_max_frequency;
u32 cur_speed;
struct spi_device *cur_spi;
@@ -314,15 +313,6 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi,
return tegra_sflash_start_cpu_based_transfer(tsd, t);
}
-static int tegra_sflash_setup(struct spi_device *spi)
-{
- struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master);
-
- /* Set speed to the spi max fequency if spi device has not set */
- spi->max_speed_hz = spi->max_speed_hz ? : tsd->spi_max_frequency;
- return 0;
-}
-
static int tegra_sflash_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -429,15 +419,6 @@ static irqreturn_t tegra_sflash_isr(int irq, void *context_data)
return handle_cpu_based_xfer(tsd);
}
-static void tegra_sflash_parse_dt(struct tegra_sflash_data *tsd)
-{
- struct device_node *np = tsd->dev->of_node;
-
- if (of_property_read_u32(np, "spi-max-frequency",
- &tsd->spi_max_frequency))
- tsd->spi_max_frequency = 25000000; /* 25MHz */
-}
-
static struct of_device_id tegra_sflash_of_match[] = {
{ .compatible = "nvidia,tegra20-sflash", },
{}
@@ -466,7 +447,6 @@ static int tegra_sflash_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA;
- master->setup = tegra_sflash_setup;
master->transfer_one_message = tegra_sflash_transfer_one_message;
master->auto_runtime_pm = true;
master->num_chipselect = MAX_CHIP_SELECT;
@@ -478,7 +458,9 @@ static int tegra_sflash_probe(struct platform_device *pdev)
tsd->dev = &pdev->dev;
spin_lock_init(&tsd->lock);
- tegra_sflash_parse_dt(tsd);
+ if (of_property_read_u32(tsd->dev->of_node, "spi-max-frequency",
+ &master->max_speed_hz))
+ master->max_speed_hz = 25000000; /* 25MHz */
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tsd->base = devm_ioremap_resource(&pdev->dev, r);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-02-10 13:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 13:48 [PATCH 1/3] spi: tegra114: Convert to use master->max_speed_hz Axel Lin
2014-02-10 13:49 ` Axel Lin [this message]
2014-02-10 13:51 ` [PATCH 3/3] spi: tegra20-slink: " Axel Lin
2014-02-10 16:53 ` [PATCH 1/3] spi: tegra114: " Stephen Warren
[not found] ` <52F903EF.4030606-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-02-10 18:27 ` Mark Brown
2014-02-11 12:09 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392040189.4191.3.camel@phoenix \
--to=axel.lin-8e1dmatc8ynqt0dzr+alfa@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.