All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antonio Quartulli <antonio@meshcoding.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Antonio Quartulli <antonio@open-mesh.com>
Subject: [B.A.T.M.A.N.] [RFC 12/23] batman-adv: add base throughput attribute
Date: Tue, 11 Feb 2014 13:48:12 +0100	[thread overview]
Message-ID: <1392122903-805-13-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1392122903-805-1-git-send-email-antonio@meshcoding.com>

From: Antonio Quartulli <antonio@open-mesh.com>

when batman-adv is asked to estimate/compute the throughput
of an interface, but it fails for whatever reason, then the
value in this attribute is used

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---
 bat_v.c | 3 +++
 main.h  | 7 +++++++
 sysfs.c | 7 +++++++
 types.h | 1 +
 4 files changed, 18 insertions(+)

diff --git a/bat_v.c b/bat_v.c
index d5457b3..3aa42ec 100644
--- a/bat_v.c
+++ b/bat_v.c
@@ -75,6 +75,9 @@ static struct batadv_algo_ops batadv_batman_v __read_mostly = {
 
 int batadv_v_mesh_init(struct batadv_priv *bat_priv)
 {
+	atomic_set(&bat_priv->bat_v.base_throughput,
+		   BATADV_DEFAULT_BASE_THROUGHPUT);
+
 	return batadv_v_ogm_init(bat_priv);
 }
 
diff --git a/main.h b/main.h
index 47fb9ed..5699c9f 100644
--- a/main.h
+++ b/main.h
@@ -33,6 +33,13 @@
 #define BATADV_MAX_METRIC 0xFFFFFFFF
 #define BATADV_JITTER 20
 
+/**
+ * BATADV_DEFAULT_BASE_THROUGHPUT - default value used as throughput for
+ * hard_ifaces for which it is not possible to measure/estimate the real one.
+ * Value is expressed in Mbps/10
+ */
+#define BATADV_DEFAULT_BASE_THROUGHPUT 10
+
 /* Time To Live of broadcast messages */
 #define BATADV_TTL 50
 
diff --git a/sysfs.c b/sysfs.c
index 8bbbdfa..a670eeb 100644
--- a/sysfs.c
+++ b/sysfs.c
@@ -606,6 +606,10 @@ BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR,
 #endif
 static BATADV_ATTR(isolation_mark, S_IRUGO | S_IWUSR,
 		   batadv_show_isolation_mark, batadv_store_isolation_mark);
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+BATADV_ATTR_SIF_UINT2(base_throughput, bat_v.base_throughput, S_IRUGO | S_IWUSR,
+		      1, UINT_MAX, NULL);
+#endif
 
 static struct batadv_attribute *batadv_mesh_attrs[] = {
 	&batadv_attr_aggregated_ogms,
@@ -630,6 +634,9 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
 	&batadv_attr_network_coding,
 #endif
 	&batadv_attr_isolation_mark,
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+	&batadv_attr_base_throughput,
+#endif
 	NULL,
 };
 
diff --git a/types.h b/types.h
index 64316b9..22d621e 100644
--- a/types.h
+++ b/types.h
@@ -741,6 +741,7 @@ struct batadv_priv_bat_v {
 	int ogm_buff_len;
 	struct delayed_work ogm_wq;
 	atomic_t ogm_seqno;
+	atomic_t base_throughput;
 };
 
 /**
-- 
1.8.5.3


  parent reply	other threads:[~2014-02-11 12:48 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11 12:48 [B.A.T.M.A.N.] [RFC 00/23] Introducing a new routing protocol: B.A.T.M.A.N. V Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 01/23] batman-adv: invoke ogm_schedule() only when the interface is activated Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 02/23] batman-adv: Add hard_iface specific sysfs wrapper macros for UINT Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 03/23] batman-adv: ELP - adding basic infrastructure Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 04/23] batman-adv: ELP - creating neighbor structures Antonio Quartulli
2014-02-11 15:32   ` Andrew Lunn
2014-02-11 16:02     ` Antonio Quartulli
2014-02-11 16:11       ` Lew Pitcher
2014-02-11 16:26         ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 05/23] batman-adv: ELP - exporting neighbor list via debugfs Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 06/23] batman-adv: ELP - adding sysfs parameter for elp interval Antonio Quartulli
2014-02-11 16:59   ` Andrew Lunn
2014-02-11 17:08     ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 07/23] batman-adv: OGMv2 - add basic infrastructure Antonio Quartulli
2014-02-11 17:12   ` Andrew Lunn
2014-02-11 17:52     ` Antonio Quartulli
2014-02-12  7:44       ` Andrew Lunn
2014-02-12  7:58         ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 08/23] batman-adv: OGMv2 - implement originators logic Antonio Quartulli
2014-02-11 17:22   ` Andrew Lunn
2014-02-11 17:30     ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 09/23] batman-adv: OGMv2 - purge obsolete potential routers Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 10/23] batman-adv: split name from variable for uint mesh attributes Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 11/23] batman-adv: add throughput attribute to hard_ifaces Antonio Quartulli
2014-02-12  8:42   ` Andrew Lunn
2014-02-11 12:48 ` Antonio Quartulli [this message]
2014-02-12  8:40   ` [B.A.T.M.A.N.] [RFC 12/23] batman-adv: add base throughput attribute Andrew Lunn
2014-02-12 12:20     ` Antonio Quartulli
2014-02-13  9:36       ` Andrew Lunn
2014-02-13  9:53         ` Antonio Quartulli
2014-02-13  9:57           ` Andrew Lunn
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 13/23] batman-adv: add last_unicast_tx to struct neigh_node_elp Antonio Quartulli
2014-02-12  8:49   ` Andrew Lunn
2014-02-12 12:25     ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 14/23] batman-adv: ELP - compute the metric based on the estimated throughput Antonio Quartulli
2014-02-12  8:58   ` Andrew Lunn
2014-02-12 12:27     ` Antonio Quartulli
2014-02-12 15:44       ` Antonio Quartulli
2014-02-13  9:45         ` Andrew Lunn
2014-02-13  9:46           ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 15/23] batman-adv: ELP - send unicast ELP packets for throughput sampling Antonio Quartulli
2014-02-12  9:12   ` Andrew Lunn
2014-02-12 12:12     ` Antonio Quartulli
2014-02-12 12:54       ` Felix Fietkau
2014-02-12 12:56         ` Antonio Quartulli
2014-02-12 13:02           ` Antonio Quartulli
2014-02-13  9:55           ` Andrew Lunn
2014-02-13 10:02             ` Antonio Quartulli
2014-02-13 10:09               ` Andrew Lunn
2014-02-13 10:13                 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 16/23] batman-adv: ELP - read estimated throughput from cfg80211 Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 17/23] batman-adv: ELP - implement dead neigh node detection Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 18/23] batman-adv: ELP - use phydev to determine link characteristics Antonio Quartulli
2014-02-13  8:17   ` Antonio Quartulli
2014-02-13  8:19     ` Antonio Quartulli
2014-02-13 10:52   ` Andrew Lunn
2014-02-13 11:02     ` Antonio Quartulli
2014-02-13 11:44       ` Andrew Lunn
2014-02-14  8:24         ` Antonio Quartulli
2014-02-14 17:38           ` Andrew Lunn
2014-02-14 17:46             ` Antonio Quartulli
2014-02-14 18:18               ` Andrew Lunn
2014-02-14 19:18                 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 19/23] batman-adv: add bat_neigh_free() API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 20/23] batman-adv: B.A.T.M.A.N. V - implement " Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 21/23] batman-adv: B.A.T.M.A.N. V - implement neigh_is_equiv_or_better API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 22/23] batman-adv: B.A.T.M.A.N. V - implement bat_neigh_cmp API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 23/23] batman-adv: B.A.T.M.A.N. V - implement bat_orig_print API Antonio Quartulli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392122903-805-13-git-send-email-antonio@meshcoding.com \
    --to=antonio@meshcoding.com \
    --cc=antonio@open-mesh.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.