From: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>,
John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFT][PATCH 1/2] spi: octeon: Remove struct octeon_spi_setup usage
Date: Wed, 19 Feb 2014 17:30:52 +0800 [thread overview]
Message-ID: <1392802252.7991.1.camel@phoenix> (raw)
Current code uses struct octeon_spi_setup to store max_speed_hz, chip_select and
mode settings of current spi device.
We can always get the same settings in octeon_spi_do_transfer() by msg->spi.
So this patch removes struct octeon_spi_setup and octeon_spi_setup,
octeon_spi_cleanup functions.
Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
drivers/spi/spi-octeon.c | 69 +++++-------------------------------------------
1 file changed, 7 insertions(+), 62 deletions(-)
diff --git a/drivers/spi/spi-octeon.c b/drivers/spi/spi-octeon.c
index c54c083..b47245c 100644
--- a/drivers/spi/spi-octeon.c
+++ b/drivers/spi/spi-octeon.c
@@ -32,12 +32,6 @@ struct octeon_spi {
u64 cs_enax;
};
-struct octeon_spi_setup {
- u32 max_speed_hz;
- u8 chip_select;
- u8 mode;
-};
-
static void octeon_spi_wait_ready(struct octeon_spi *p)
{
union cvmx_mpi_sts mpi_sts;
@@ -55,6 +49,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
struct spi_transfer *xfer,
bool last_xfer)
{
+ struct spi_device *spi = msg->spi;
union cvmx_mpi_cfg mpi_cfg;
union cvmx_mpi_tx mpi_tx;
unsigned int clkdiv;
@@ -66,16 +61,11 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
int len;
int i;
- struct octeon_spi_setup *msg_setup = spi_get_ctldata(msg->spi);
-
- speed_hz = msg_setup->max_speed_hz;
- mode = msg_setup->mode;
+ mode = spi->mode;
cpha = mode & SPI_CPHA;
cpol = mode & SPI_CPOL;
- if (xfer->speed_hz)
- speed_hz = xfer->speed_hz;
-
+ speed_hz = xfer->speed_hz ? : spi->max_speed_hz;
if (speed_hz > OCTEON_SPI_MAX_CLOCK_HZ)
speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
@@ -91,8 +81,8 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
mpi_cfg.s.cslate = cpha ? 1 : 0;
mpi_cfg.s.enable = 1;
- if (msg_setup->chip_select < 4)
- p->cs_enax |= 1ull << (12 + msg_setup->chip_select);
+ if (spi->chip_select < 4)
+ p->cs_enax |= 1ull << (12 + spi->chip_select);
mpi_cfg.u64 |= p->cs_enax;
if (mpi_cfg.u64 != p->last_cfg) {
@@ -112,7 +102,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
cvmx_write_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i), d);
}
mpi_tx.u64 = 0;
- mpi_tx.s.csid = msg_setup->chip_select;
+ mpi_tx.s.csid = spi->chip_select;
mpi_tx.s.leavecs = 1;
mpi_tx.s.txnum = tx_buf ? OCTEON_SPI_MAX_BYTES : 0;
mpi_tx.s.totnum = OCTEON_SPI_MAX_BYTES;
@@ -137,7 +127,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
}
mpi_tx.u64 = 0;
- mpi_tx.s.csid = msg_setup->chip_select;
+ mpi_tx.s.csid = spi->chip_select;
if (last_xfer)
mpi_tx.s.leavecs = xfer->cs_change;
else
@@ -167,15 +157,6 @@ static int octeon_spi_transfer_one_message(struct spi_master *master,
int status = 0;
struct spi_transfer *xfer;
- /*
- * We better have set the configuration via a call to .setup
- * before we get here.
- */
- if (spi_get_ctldata(msg->spi) == NULL) {
- status = -EINVAL;
- goto err;
- }
-
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
bool last_xfer = list_is_last(&xfer->transfer_list,
&msg->transfers);
@@ -193,40 +174,6 @@ err:
return status;
}
-static struct octeon_spi_setup *octeon_spi_new_setup(struct spi_device *spi)
-{
- struct octeon_spi_setup *setup = kzalloc(sizeof(*setup), GFP_KERNEL);
- if (!setup)
- return NULL;
-
- setup->max_speed_hz = spi->max_speed_hz;
- setup->chip_select = spi->chip_select;
- setup->mode = spi->mode;
- return setup;
-}
-
-static int octeon_spi_setup(struct spi_device *spi)
-{
- struct octeon_spi_setup *new_setup;
- struct octeon_spi_setup *old_setup = spi_get_ctldata(spi);
-
- new_setup = octeon_spi_new_setup(spi);
- if (!new_setup)
- return -ENOMEM;
-
- spi_set_ctldata(spi, new_setup);
- kfree(old_setup);
-
- return 0;
-}
-
-static void octeon_spi_cleanup(struct spi_device *spi)
-{
- struct octeon_spi_setup *old_setup = spi_get_ctldata(spi);
- spi_set_ctldata(spi, NULL);
- kfree(old_setup);
-}
-
static int octeon_spi_probe(struct platform_device *pdev)
{
struct resource *res_mem;
@@ -262,8 +209,6 @@ static int octeon_spi_probe(struct platform_device *pdev)
SPI_LSB_FIRST |
SPI_3WIRE;
- master->setup = octeon_spi_setup;
- master->cleanup = octeon_spi_cleanup;
master->transfer_one_message = octeon_spi_transfer_one_message;
master->bits_per_word_mask = SPI_BPW_MASK(8);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-02-19 9:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-19 9:30 Axel Lin [this message]
2014-02-19 9:34 ` [RFT][PATCH 2/2] spi: octeon: Convert to let spi core validate transfer speed Axel Lin
2014-03-03 4:00 ` [RFT][PATCH 1/2] spi: octeon: Remove struct octeon_spi_setup usage Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392802252.7991.1.camel@phoenix \
--to=axel.lin-8e1dmatc8ynqt0dzr+alfa@public.gmane.org \
--cc=blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.