All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Josh Cartwright <joshc@codeaurora.org>,
	linux-input@vger.kernel.org
Subject: [PATCH v5 6/9] Input: pm8xxx-vibrator - Add DT match table
Date: Tue,  4 Mar 2014 10:34:45 -0800	[thread overview]
Message-ID: <1393958088-1456-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1393958088-1456-1-git-send-email-sboyd@codeaurora.org>

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/input/misc/pm8xxx-vibrator.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index b88b7cbf93e2..5079bc54c3aa 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -141,6 +141,13 @@ static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data,
 	return 0;
 }
 
+static const struct of_device_id pm8xxx_vib_id_table[] = {
+	{ .compatible = "qcom,pm8058-vib" },
+	{ .compatible = "qcom,pm8921-vib" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
+
 static int pm8xxx_vib_probe(struct platform_device *pdev)
 
 {
@@ -220,6 +227,7 @@ static struct platform_driver pm8xxx_vib_driver = {
 		.name	= "pm8xxx-vib",
 		.owner	= THIS_MODULE,
 		.pm	= &pm8xxx_vib_pm_ops,
+		.of_match_table = pm8xxx_vib_id_table,
 	},
 };
 module_platform_driver(pm8xxx_vib_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 6/9] Input: pm8xxx-vibrator - Add DT match table
Date: Tue,  4 Mar 2014 10:34:45 -0800	[thread overview]
Message-ID: <1393958088-1456-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1393958088-1456-1-git-send-email-sboyd@codeaurora.org>

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/input/misc/pm8xxx-vibrator.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index b88b7cbf93e2..5079bc54c3aa 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -141,6 +141,13 @@ static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data,
 	return 0;
 }
 
+static const struct of_device_id pm8xxx_vib_id_table[] = {
+	{ .compatible = "qcom,pm8058-vib" },
+	{ .compatible = "qcom,pm8921-vib" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
+
 static int pm8xxx_vib_probe(struct platform_device *pdev)
 
 {
@@ -220,6 +227,7 @@ static struct platform_driver pm8xxx_vib_driver = {
 		.name	= "pm8xxx-vib",
 		.owner	= THIS_MODULE,
 		.pm	= &pm8xxx_vib_pm_ops,
+		.of_match_table = pm8xxx_vib_id_table,
 	},
 };
 module_platform_driver(pm8xxx_vib_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2014-03-04 18:34 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-04 18:34 [PATCH v5 0/9] Use regmap+devm+DT in pm8xxx input drivers Stephen Boyd
2014-03-04 18:34 ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 1/9] Input: pmic8xxx-keypad - Fix build by removing gpio configuration Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 3/9] Input: pmic8xxx-keypad - Migrate to regmap APIs Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 4/9] Input: pmic8xxx-keypad - Migrate to DT Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 5/9] Input: pmic8xxx-pwrkey " Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` Stephen Boyd [this message]
2014-03-04 18:34   ` [PATCH v5 6/9] Input: pm8xxx-vibrator - Add DT match table Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 7/9] devicetree: bindings: Document PM8921/8058 keypads Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 8/9] devicetree: bindings: Document PM8921/8058 power keys Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34 ` [PATCH v5 9/9] devicetree: bindings: Document PM8921/8058 vibrators Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-04 18:34   ` Stephen Boyd
2014-03-11 17:50 ` [PATCH v5 0/9] Use regmap+devm+DT in pm8xxx input drivers Stephen Boyd
2014-03-11 17:50   ` Stephen Boyd
2014-03-17 21:17   ` Stephen Boyd
2014-03-17 21:17     ` Stephen Boyd
2014-03-29 19:50 ` Dmitry Torokhov
2014-03-29 19:50   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393958088-1456-7-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=joshc@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.