From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
rob@landley.net, sameo@linux.intel.com, lee.jones@linaro.org,
lgirdwood@gmail.com, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/8] regulator: arizona-ldo1: Add processing of init_data from device tree
Date: Tue, 18 Mar 2014 10:49:13 +0000 [thread overview]
Message-ID: <1395139757-6907-5-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1395139757-6907-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++
drivers/regulator/arizona-ldo1.c | 26 +++++++++++++++++++++
2 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 36a0c3d..d78f1aa 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ Optional properties:
the chip default will be used. If present exactly five values must
be specified.
+ - wlf,ldo1 : Initial data for the LDO1 regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - DCVDD-supply : Power supply, only needs to be specified if DCVDD is being
+ externally supplied. As covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
Example:
codec: wm5102@1a {
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 6379fd3..a67013f 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/slab.h>
@@ -184,9 +185,34 @@ static const struct regulator_init_data arizona_ldo1_default = {
static int arizona_ldo1_get_pdata(struct arizona *arizona,
struct regulator_config *config)
{
+ struct arizona_pdata *pdata = &arizona->pdata;
+ struct arizona_ldo1 *ldo1 = config->driver_data;
+ struct device_node *np_init, *np_dcvdd;
+
arizona_of_get_named_gpio(arizona, "wlf,ldoena", true,
&config->ena_gpio);
+ np_init = of_get_child_by_name(arizona->dev->of_node, "wlf,ldo1");
+ np_dcvdd = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
+
+ if (np_init) {
+ config->of_node = np_init;
+
+ pdata->ldo1 = of_get_regulator_init_data(arizona->dev, np_init);
+
+ if (np_dcvdd) {
+ if (np_dcvdd != np_init)
+ arizona->external_dcvdd = true;
+ } else {
+ pdata->ldo1->consumer_supplies = &ldo1->supply;
+ pdata->ldo1->num_consumer_supplies = 1;
+ }
+
+ config->init_data = pdata->ldo1;
+ } else if (np_dcvdd) {
+ arizona->external_dcvdd = true;
+ }
+
return 0;
}
#else
--
1.7.2.5
next prev parent reply other threads:[~2014-03-18 10:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-18 10:49 [PATCH 0/8] Arizona regulator updates Charles Keepax
2014-03-18 10:49 ` [PATCH 1/8] arizona: Correct small errors in the DT binding documentation Charles Keepax
2014-03-18 10:49 ` [PATCH 2/8] mfd: arizona: Factor out read of device tree GPIOs Charles Keepax
2014-03-18 10:49 ` [PATCH 3/8] regulator: arizona-ldo1: Move setup processing from arizona-core Charles Keepax
2014-03-18 11:10 ` Mark Brown
2014-03-18 14:11 ` Charles Keepax
2014-03-18 10:49 ` Charles Keepax [this message]
2014-03-18 11:15 ` [PATCH 4/8] regulator: arizona-ldo1: Add processing of init_data from device tree Mark Brown
2014-03-18 16:07 ` Charles Keepax
2014-03-18 16:19 ` Mark Brown
2014-03-18 10:49 ` [PATCH 5/8] regulator: arizona-micsupp: " Charles Keepax
2014-03-18 10:49 ` [PATCH 6/8] mfd: arizona: Add MICVDD to mapped regulators Charles Keepax
2014-03-18 10:49 ` [PATCH 7/8] mfd: wm8997: Add registers for high power mode Charles Keepax
2014-03-18 10:49 ` [PATCH 8/8] regulator: arizona-ldo1: Correct default regulator init_data Charles Keepax
2014-03-18 11:21 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395139757-6907-5-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=pawel.moll@arm.com \
--cc=rob@landley.net \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.