From: "Joël Krähemann" <joel@weedlight.ch>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: vmlinuz-3.12.13-rt21 freezed by application
Date: Mon, 31 Mar 2014 02:26:32 +0200 [thread overview]
Message-ID: <1396225592.6272.0.camel@debian> (raw)
In-Reply-To: <1396222180.3831.0.camel@debian>
On Mon, 2014-03-31 at 01:29 +0200, Joël Krähemann wrote:
> On Sat, 2014-03-29 at 18:40 +0100, Joël Krähemann wrote:
> > Same effect with vmlinuz-3.12.14-rt23 even with WindowMaker.
> >
> > The fan turns on on no reaction of the OS without any special realtime
> > privileges. The threads run at priority 0 and can't switch to TTY[0-6].
> >
> > It's a recent mac book pro output of `lspci -v` attached.
> >
> > I have programmed a thread wrapper AgsThread with glib-object using
> > pthreads. I'm syncing a tree and having a thread pool which adds threads
> > to the tree at runtime.
> >
> > Finally my question, what is the state of realtime kernel thread safety?
> > My application runs more or less stable with default debian kernel
> > configuration. But getting real bad performance.
> >
> >
> > On Sat, 2014-03-29 at 17:14 +0100, Joël Krähemann wrote:
> > > Hi, my application freezed recent kernel:
> > >
> > > vmlinuz-3.12.13-rt21
> > >
> > > http://sourceforge.net/p/ags/blog/2014/03/warning-freezed-gnulinux/
> > >
> > >
> > > Now I'm compiling vmlinuz-3.12.14-rt23 but as fully tickles
> > >
> > >
> >
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.12.15-rt25 (root@debian) (gcc version
> 4.8.2 (Debian 4.8.2-18) ) #1 SMP PREEMPT RT Sun Mar 30 23:57:59 CEST
> 2014
> [ 0.000000] Command line:
> BOOT_IMAGE=(hd0,gpt6)/boot/vmlinuz-3.12.15-rt25 root=/dev/sda6
> nouveau.modeset=1 nouveau.modeset=1 acpi_backlight=vendor vt_handoff=7
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x00000000000bffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008ad13fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000008ad14000-0x000000008ad52fff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000008ad53000-0x000000008ad68fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000008ad69000-0x000000008ad74fff]
> ACPI data
> [ 0.000000] BIOS-e820: [mem 0x000000008ad75000-0x000000008ad75fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000008ad76000-0x000000008ad8efff]
> ACPI data
> [ 0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008af8ffff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000008af90000-0x000000008affefff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.4 present.
> [ 0.000000] DMI: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS
> MBP101.88Z.00EE.B03.1212211437 12/21/2012
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x46f600 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: write-back
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-DFFFF write-protect
> [ 0.000000] E0000-FFFFF uncachable
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
> [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
> [ 0.000000] 2 base 090000000 mask FF0000000 uncachable
> [ 0.000000] 3 base 08C000000 mask FFC000000 uncachable
> [ 0.000000] 4 base 08B000000 mask FFF000000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000
> [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size
> 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
> [ 0.000000] BRK [0x01ab5000, 0x01ab5fff] PGTABLE
> [ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x46f400000-0x46f5fffff]
> [ 0.000000] [mem 0x46f400000-0x46f5fffff] page 2M
> [ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x46c000000-0x46f3fffff]
> [ 0.000000] [mem 0x46c000000-0x46f3fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x400000000-0x46bffffff]
> [ 0.000000] [mem 0x400000000-0x46bffffff] page 2M
> [ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
> [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
> [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
> [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x40005000-0x8ad13fff]
> [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
> [ 0.000000] [mem 0x40200000-0x8abfffff] page 2M
> [ 0.000000] [mem 0x8ac00000-0x8ad13fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x8ad53000-0x8ad68fff]
> [ 0.000000] [mem 0x8ad53000-0x8ad68fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x8ad75000-0x8ad75fff]
> [ 0.000000] [mem 0x8ad75000-0x8ad75fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x8ad8f000-0x8af8ffff]
> [ 0.000000] [mem 0x8ad8f000-0x8af8ffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x8afff000-0x8affffff]
> [ 0.000000] [mem 0x8afff000-0x8affffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
> [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
> [ 0.000000] RAMDISK: [mem 0x3664e000-0x3731efff]
> [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
> [ 0.000000] ACPI: XSDT 000000008ad8e1c0 000AC (v01 APPLE Apple00
> 00000000 01000013)
> [ 0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00
> 00000000 Loki 0000005F)
> [ 0.000000] ACPI: DSDT 000000008ad82000 04D5C (v01 APPLE MacBookP
> 00100001 INTL 20100915)
> [ 0.000000] ACPI: FACS 000000008ad1e000 00040
> [ 0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00
> 00000001 Loki 0000005F)
> [ 0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00
> 00000001 Loki 0000005F)
> [ 0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00
> 00000001 Loki 0000005F)
> [ 0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00
> 00000001 Loki 0000005F)
> [ 0.000000] ACPI: SSDT 000000008ad7f000 0053A (v01 APPLE SataAhci
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad7e000 00024 (v01 APPLE SmcDppt
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad79000 00D3E (v01 APPLE UsbPpt
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad73000 015EB (v02 APPLE SsdtIGPU
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad6e000 019AA (v01 APPLE TbtPEG11
> 00001000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad6d000 0071D (v01 PmRef Cpu0Ist
> 00003000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad6c000 00B3D (v01 PmRef CpuPm
> 00003000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad6b000 00315 (v01 PmRef Cpu0Tst
> 00003000 INTL 20100915)
> [ 0.000000] ACPI: SSDT 000000008ad6a000 0037A (v01 PmRef ApTst
> 00003000 INTL 20100915)
> [ 0.000000] ACPI: DMAR 000000008ad69000 00088 (v01 APPLE IVB
> 00000001 AAPL 00000001)
> [ 0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00
> 00000001 Loki 0000005F)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem
> 0x0000000000000000-0x000000046f5fffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x46f5fffff]
> [ 0.000000] NODE_DATA [mem 0x46f5eb000-0x46f5effff]
> [ 0.000000] [ffffea0000000000-ffffea0011bfffff] PMD ->
> [ffff88045ec00000-ffff88046ebfffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x46f5fffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
> [ 0.000000] node 0: [mem 0x00090000-0x0009efff]
> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
> [ 0.000000] node 0: [mem 0x40005000-0x8ad13fff]
> [ 0.000000] node 0: [mem 0x8ad53000-0x8ad68fff]
> [ 0.000000] node 0: [mem 0x8ad75000-0x8ad75fff]
> [ 0.000000] node 0: [mem 0x8ad8f000-0x8af8ffff]
> [ 0.000000] node 0: [mem 0x8afff000-0x8affffff]
> [ 0.000000] node 0: [mem 0x100000000-0x46f5fffff]
> [ 0.000000] On node 0 totalpages: 4170440
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 8821 pages used for memmap
> [ 0.000000] DMA32 zone: 564524 pages, LIFO batch:31
> [ 0.000000] Normal zone: 56280 pages used for memmap
> [ 0.000000] Normal zone: 3601920 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8ad14000-0x8ad52fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8ad69000-0x8ad74fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8ad76000-0x8ad8efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8af90000-0x8affefff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8b000000-0x8f9fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
> [ 0.000000] e820: [mem 0x8fa00000-0xdfffffff] available for PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88046f200000 s89536
> r8192 d21056 u262144
> [ 0.000000] pcpu-alloc: s89536 r8192 d21056 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 4105254
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=(hd0,gpt6)/boot/vmlinuz-3.12.15-rt25 root=/dev/sda6
> nouveau.modeset=1 nouveau.modeset=1 acpi_backlight=vendor vt_handoff=7
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> bailing!
> [ 0.000000] Memory: 16327620K/16681760K available (4844K kernel code,
> 706K rwdata, 1592K rodata, 956K init, 1072K bss, 354140K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
> Nodes=1
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
> [ 0.000000] Offload RCU callbacks from all CPUs
> [ 0.000000] Offload RCU callbacks from CPUs: 0-511.
> [ 0.000000] NR_IRQS:33024 nr_irqs:744 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 268435456 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.001000] tsc: Detected 2693.870 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5387.74 BogoMIPS (lpj=2693870)
> [ 0.000004] pid_max: default: 32768 minimum: 301
> [ 0.000029] Security Framework initialized
> [ 0.000032] AppArmor: AppArmor disabled by boot time parameter
> [ 0.000032] Yama: becoming mindful.
> [ 0.001830] Dentry cache hash table entries: 2097152 (order: 13,
> 33554432 bytes)
> [ 0.005714] Inode-cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
> [ 0.007317] Mount-cache hash table entries: 256
> [ 0.007445] Initializing cgroup subsys memory
> [ 0.007452] Initializing cgroup subsys devices
> [ 0.007452] Initializing cgroup subsys freezer
> [ 0.007453] Initializing cgroup subsys net_cls
> [ 0.007454] Initializing cgroup subsys blkio
> [ 0.007454] Initializing cgroup subsys perf_event
> [ 0.007474] CPU: Physical Processor ID: 0
> [ 0.007474] CPU: Processor Core ID: 0
> [ 0.007806] mce: CPU supports 9 MCE banks
> [ 0.007816] CPU0: Thermal monitoring enabled (TM1)
> [ 0.007824] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> [ 0.007824] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 0.007824] tlb_flushall_shift: 2
> [ 0.007925] Freeing SMP alternatives memory: 20K (ffffffff819a1000 -
> ffffffff819a6000)
> [ 0.008626] ACPI: Core revision 20130725
> [ 0.013728] ACPI: All ACPI Tables successfully acquired
> [ 0.014043] dmar: Host address width 36
> [ 0.014044] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.014048] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
> c0000020e60262 ecap f0101a
> [ 0.014049] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.014053] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
> c9008020660262 ecap f0105a
> [ 0.014053] dmar: RMRR base: 0x0000008b800000 end: 0x0000008f9fffff
> [ 0.014124] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
> [ 0.014124] HPET id 0 under DRHD base 0xfed91000
> [ 0.014125] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt
> remapping will be disabled
> [ 0.014125] Not enable interrupt remapping
> [ 0.014125] Failed to enable irq remapping. You are vulnerable to
> irq-injection attacks.
> [ 0.014579] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.024578] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
> (fam: 06, model: 3a, stepping: 09)
> [ 0.024585] TSC deadline timer enabled
> [ 0.024593] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
> events, full-width counters, Intel PMU driver.
> [ 0.033798] ... version: 3
> [ 0.033883] ... bit width: 48
> [ 0.033965] ... generic registers: 4
> [ 0.034049] ... value mask: 0000ffffffffffff
> [ 0.034134] ... max period: 0000ffffffffffff
> [ 0.034220] ... fixed-purpose events: 3
> [ 0.034304] ... event mask: 000000070000000f
> [ 0.061486] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 0.047745] smpboot: Booting Node 0, Processors # 1 # 2 # 3
> # 4 # 5 # 6 # 7 OK
> [ 0.167429] Brought up 8 CPUs
> [ 0.167521] smpboot: Total of 8 processors activated (43101.92
> BogoMIPS)
> [ 0.173941] devtmpfs: initialized
> [ 0.176943] PM: Registering ACPI NVS region [mem
> 0x8ad14000-0x8ad52fff] (258048 bytes)
> [ 0.177181] NET: Registered protocol family 16
> [ 0.177349] cpuidle: using governor ladder
> [ 0.177442] cpuidle: using governor menu
> [ 0.177552] ACPI: bus type PCI registered
> [ 0.177642] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.177790] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem
> 0xe0000000-0xe9bfffff] (base 0xe0000000)
> [ 0.177900] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in
> E820
> [ 0.198035] PCI: Using configuration type 1 for base access
> [ 0.198784] bio: create slab <bio-0> at 0
> [ 0.198978] ACPI: Added _OSI(Module Device)
> [ 0.199070] ACPI: Added _OSI(Processor Device)
> [ 0.199153] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.199238] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.200610] ACPI: EC: EC description table is found, configuring boot
> EC
> [ 0.205134] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.205701] ACPI: SSDT 000000008ad19190 008AD (v01 PmRef Cpu0Cst
> 00003001 INTL 20100915)
> [ 0.206286] ACPI: Dynamic OEM Table Load:
> [ 0.206506] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst
> 00003001 INTL 20100915)
> [ 0.210042] ACPI: SSDT 000000008ad1a710 003A4 (v01 PmRef ApIst
> 00003000 INTL 20100915)
> [ 0.210651] ACPI: Dynamic OEM Table Load:
> [ 0.210894] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst
> 00003000 INTL 20100915)
> [ 0.213863] ACPI: SSDT 000000008ad18d90 00119 (v01 PmRef ApCst
> 00003000 INTL 20100915)
> [ 0.214422] ACPI: Dynamic OEM Table Load:
> [ 0.214647] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
> 00003000 INTL 20100915)
> [ 0.218827] ACPI: Interpreter enabled
> [ 0.218926] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S1_] (20130725/hwxface-571)
> [ 0.219165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S2_] (20130725/hwxface-571)
> [ 0.219395] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S3_] (20130725/hwxface-571)
> [ 0.219635] ACPI: (supports S0 S4 S5)
> [ 0.219728] ACPI: Using IOAPIC for interrupt routing
> [ 0.219835] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.220082] ACPI: No dock devices found.
> [ 0.228861] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.229075] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
> [ 0.229306] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
> [ 0.229804] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain
> 0000 [bus 00-9b] only partially covers this bridge
> [ 0.230040] PCI host bridge to bus 0000:00
> [ 0.230131] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.230219] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.230304] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.230390] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff]
> [ 0.230479] pci_bus 0000:00: root bus resource [mem
> 0x8fa00000-0xfeafffff]
> [ 0.230566] pci_bus 0000:00: root bus resource [mem
> 0xfed40000-0xfed44fff]
> [ 0.230658] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
> [ 0.230732] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
> [ 0.230760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.230789] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 0.230903] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
> [ 0.230935] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
> [ 0.230962] pci 0000:00:01.1: System wakeup disabled by ACPI
> [ 0.231085] pci 0000:00:01.2: [8086:0159] type 01 class 0x060400
> [ 0.231154] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
> [ 0.231190] pci 0000:00:01.2: System wakeup disabled by ACPI
> [ 0.231335] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
> [ 0.231359] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff
> 64bit]
> [ 0.231430] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.231462] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.231592] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
> [ 0.231615] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f
> 64bit]
> [ 0.231691] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.231761] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
> [ 0.231782] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
> [ 0.231872] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.231906] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.232033] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
> [ 0.232048] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff
> 64bit]
> [ 0.232116] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.232149] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.232272] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
> [ 0.232398] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.232442] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.232565] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
> [ 0.232694] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.232737] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.232869] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
> [ 0.232890] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
> [ 0.232984] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.233018] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.233140] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
> [ 0.233297] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
> [ 0.233315] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
> [ 0.233323] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
> [ 0.233331] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
> [ 0.233339] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
> [ 0.233347] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
> [ 0.233355] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
> [ 0.233400] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.233453] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
> [ 0.233467] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff
> 64bit]
> [ 0.233487] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
> [ 0.233605] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
> [ 0.233616] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
> [ 0.233626] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff
> 64bit pref]
> [ 0.233636] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff
> 64bit pref]
> [ 0.233643] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
> [ 0.233650] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff
> pref]
> [ 0.233701] pci 0000:01:00.0: System wakeup disabled by ACPI
> [ 0.233824] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
> [ 0.233834] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
> [ 1.237261] pci 0000:00:01.0: ASPM: Could not configure common clock
> [ 1.237386] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 1.237478] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
> [ 1.237480] pci 0000:00:01.0: bridge window [mem
> 0xc0000000-0xc10fffff]
> [ 1.237484] pci 0000:00:01.0: bridge window [mem
> 0x90000000-0xa1ffffff 64bit pref]
> [ 1.237548] pci 0000:05:00.0: [8086:1547] type 01 class 0x060400
> [ 1.237604] pci 0000:05:00.0: supports D1 D2
> [ 1.237605] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.239501] pci 0000:00:01.1: PCI bridge to [bus 05-6b]
> [ 1.239621] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
> [ 1.239623] pci 0000:00:01.1: bridge window [mem
> 0xc1d00000-0xce0fffff]
> [ 1.239626] pci 0000:00:01.1: bridge window [mem
> 0xce100000-0xda1fffff 64bit pref]
> [ 1.239771] pci 0000:06:00.0: [8086:1547] type 01 class 0x060400
> [ 1.239831] pci 0000:06:00.0: supports D1 D2
> [ 1.239832] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.239891] pci 0000:06:03.0: [8086:1547] type 01 class 0x060400
> [ 1.239949] pci 0000:06:03.0: supports D1 D2
> [ 1.239951] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.240002] pci 0000:06:04.0: [8086:1547] type 01 class 0x060400
> [ 1.240059] pci 0000:06:04.0: supports D1 D2
> [ 1.240061] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.240112] pci 0000:06:05.0: [8086:1547] type 01 class 0x060400
> [ 1.240165] pci 0000:06:05.0: supports D1 D2
> [ 1.240166] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.240218] pci 0000:06:06.0: [8086:1547] type 01 class 0x060400
> [ 1.240271] pci 0000:06:06.0: supports D1 D2
> [ 1.240273] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.240334] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
> [ 1.240428] pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
> [ 1.240431] pci 0000:05:00.0: bridge window [mem
> 0xc1d00000-0xca0fffff]
> [ 1.240436] pci 0000:05:00.0: bridge window [mem
> 0xce100000-0xd61fffff 64bit pref]
> [ 1.240495] acpiphp: Slot [1] registered
> [ 1.240607] pci 0000:07:00.0: [8086:1547] type 00 class 0x088000
> [ 1.240620] pci 0000:07:00.0: reg 0x10: [mem 0xc1f00000-0xc1f3ffff]
> [ 1.240629] pci 0000:07:00.0: reg 0x14: [mem 0xc1f40000-0xc1f40fff]
> [ 1.240721] pci 0000:07:00.0: supports D1 D2
> [ 1.240723] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.242476] pci 0000:06:00.0: PCI bridge to [bus 07]
> [ 1.242597] pci 0000:06:00.0: bridge window [mem
> 0xc1f00000-0xc1ffffff]
> [ 1.242713] pci 0000:08:00.0: [8086:1549] type 01 class 0x060400
> [ 1.242845] pci 0000:08:00.0: supports D1 D2
> [ 1.242846] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.244438] pci 0000:06:03.0: PCI bridge to [bus 08-38]
> [ 1.244562] pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
> [ 1.244564] pci 0000:06:03.0: bridge window [mem
> 0xc2000000-0xc60fffff]
> [ 1.244569] pci 0000:06:03.0: bridge window [mem
> 0xce100000-0xd21fffff 64bit pref]
> [ 1.244677] pci 0000:09:00.0: [8086:1549] type 01 class 0x060400
> [ 1.244813] pci 0000:09:00.0: supports D1 D2
> [ 1.244814] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [ 1.244932] pci 0000:08:00.0: PCI bridge to [bus 09-0a]
> [ 1.245037] pci 0000:08:00.0: bridge window [mem
> 0xc2000000-0xc20fffff]
> [ 1.245046] pci 0000:08:00.0: bridge window [mem
> 0xce100000-0xce1fffff 64bit pref]
> [ 1.245180] pci 0000:0a:00.0: [14e4:1682] type 00 class 0x020000
> [ 1.245226] pci 0000:0a:00.0: reg 0x10: [mem 0xce100000-0xce10ffff
> 64bit pref]
> [ 1.245261] pci 0000:0a:00.0: reg 0x18: [mem 0xce110000-0xce11ffff
> 64bit pref]
> [ 1.245334] pci 0000:0a:00.0: reg 0x30: [mem 0xffff0000-0xffffffff
> pref]
> [ 1.245489] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
> [ 1.247310] pci 0000:09:00.0: PCI bridge to [bus 0a]
> [ 1.247435] pci 0000:09:00.0: bridge window [mem
> 0xc2000000-0xc20fffff]
> [ 1.247444] pci 0000:09:00.0: bridge window [mem
> 0xce100000-0xce1fffff 64bit pref]
> [ 1.247538] pci 0000:06:04.0: PCI bridge to [bus 39-69]
> [ 1.247636] pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
> [ 1.247639] pci 0000:06:04.0: bridge window [mem
> 0xc6100000-0xca0fffff]
> [ 1.247643] pci 0000:06:04.0: bridge window [mem
> 0xd2200000-0xd61fffff 64bit pref]
> [ 1.247690] pci 0000:06:05.0: PCI bridge to [bus 6a]
> [ 1.247788] pci 0000:06:05.0: bridge window [mem
> 0xc1e00000-0xc1efffff]
> [ 1.247839] pci 0000:06:06.0: PCI bridge to [bus 6b]
> [ 1.247937] pci 0000:06:06.0: bridge window [mem
> 0xc1d00000-0xc1dfffff]
> [ 1.248023] pci 0000:00:01.2: PCI bridge to [bus 02]
> [ 1.248122] pci 0000:00:01.2: bridge window [mem
> 0xc1b00000-0xc1bfffff]
> [ 1.248302] pci 0000:03:00.0: [14e4:16a3] type 00 class 0x020000
> [ 1.248338] pci 0000:03:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff
> 64bit pref]
> [ 1.248367] pci 0000:03:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff
> 64bit pref]
> [ 1.248419] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff
> pref]
> [ 1.248527] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 1.248662] pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
> [ 1.248700] pci 0000:03:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff
> 64bit pref]
> [ 1.248884] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
> [ 1.248925] pci 0000:03:00.1: System wakeup disabled by ACPI
> [ 1.250626] pci 0000:00:1c.0: PCI bridge to [bus 03]
> [ 1.250725] pci 0000:00:1c.0: bridge window [mem
> 0xc1a00000-0xc1afffff]
> [ 1.250733] pci 0000:00:1c.0: bridge window [mem
> 0xc1800000-0xc18fffff 64bit pref]
> [ 1.250884] pci 0000:04:00.0: [14e4:4331] type 00 class 0x028000
> [ 1.250914] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1903fff
> 64bit]
> [ 1.251085] pci 0000:04:00.0: supports D1 D2
> [ 1.251086] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> [ 1.251125] pci 0000:04:00.0: System wakeup disabled by ACPI
> [ 1.252500] pci 0000:00:1c.1: PCI bridge to [bus 04]
> [ 1.252620] pci 0000:00:1c.1: bridge window [mem
> 0xc1900000-0xc19fffff]
> [ 1.253176] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
> 14 15) *11
> [ 1.254165] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
> 14 15) *0, disabled.
> [ 1.255219] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
> 14 15) *0, disabled.
> [ 1.256274] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12
> 14 15)
> [ 1.257193] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
> 14 15) *0, disabled.
> [ 1.258248] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
> 14 15) *0, disabled.
> [ 1.259303] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12
> 14 15)
> [ 1.260217] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12
> 14 15)
> [ 1.262566] ACPI: Enabled 3 GPEs in block 00 to 3F
> [ 1.262792] ACPI: \_SB_.PCI0: notify handler is installed
> [ 1.262837] Found 1 acpi root devices
> [ 1.262859] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data =
> 0x62
> [ 1.263038] vgaarb: device added: PCI:0000:01:00.0,decodes=io
> +mem,owns=io+mem,locks=none
> [ 1.263141] vgaarb: loaded
> [ 1.263225] vgaarb: bridge control possible 0000:01:00.0
> [ 1.263340] PCI: Using ACPI for IRQ routing
> [ 1.268526] PCI: pci_cache_line_size set to 64 bytes
> [ 1.268729] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
> [ 1.268731] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
> [ 1.268732] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
> [ 1.268733] e820: reserve RAM buffer [mem 0x8ad14000-0x8bffffff]
> [ 1.268735] e820: reserve RAM buffer [mem 0x8ad69000-0x8bffffff]
> [ 1.268736] e820: reserve RAM buffer [mem 0x8ad76000-0x8bffffff]
> [ 1.268738] e820: reserve RAM buffer [mem 0x8af90000-0x8bffffff]
> [ 1.268739] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
> [ 1.268740] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff]
> [ 1.268834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 1.269499] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 1.272639] Switched to clocksource hpet
> [ 1.274605] pnp: PnP ACPI init
> [ 1.274720] ACPI: bus type PNP registered
> [ 1.274895] pnp 00:00: [dma 4]
> [ 1.274915] pnp 00:00: Plug and Play ACPI device, IDs PNP0200
> (active)
> [ 1.274936] pnp 00:01: Plug and Play ACPI device, IDs INT0800
> (active)
> [ 1.275040] system 00:02: [mem 0xfed00000-0xfed003ff] has been
> reserved
> [ 1.275138] system 00:02: Plug and Play ACPI device, IDs PNP0103
> PNP0c01 (active)
> [ 1.275166] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04
> (active)
> [ 1.275200] system 00:04: [io 0x1000-0x100f] has been reserved
> [ 1.275295] system 00:04: [io 0x0400-0x047f] could not be reserved
> [ 1.275384] system 00:04: [io 0x0500-0x057f] has been reserved
> [ 1.275469] system 00:04: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.275489] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00
> (active)
> [ 1.275519] pnp 00:06: Plug and Play ACPI device, IDs APP0001
> (active)
> [ 1.275571] pnp 00:07: Plug and Play ACPI device, IDs APP000b
> (active)
> [ 1.275716] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been
> reserved
> [ 1.275814] system 00:08: [mem 0xfed10000-0xfed17fff] could not be
> reserved
> [ 1.275902] system 00:08: [mem 0xfed18000-0xfed18fff] has been
> reserved
> [ 1.275990] system 00:08: [mem 0xfed19000-0xfed19fff] has been
> reserved
> [ 1.276078] system 00:08: [mem 0xe0000000-0xefffffff] has been
> reserved
> [ 1.276163] system 00:08: [mem 0xfed20000-0xfed3ffff] has been
> reserved
> [ 1.276252] system 00:08: [mem 0xfed90000-0xfed93fff] could not be
> reserved
> [ 1.281389] system 00:08: [mem 0xfed45000-0xfed8ffff] has been
> reserved
> [ 1.281478] system 00:08: [mem 0xff000000-0xffffffff] could not be
> reserved
> [ 1.281566] system 00:08: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 1.281658] system 00:08: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.283942] system 00:09: [mem 0x20000000-0x201fffff] has been
> reserved
> [ 1.284096] system 00:09: [mem 0x40000000-0x401fffff] could not be
> reserved
> [ 1.284213] system 00:09: Plug and Play ACPI device, IDs PNP0c01
> (active)
> [ 1.284219] pnp: PnP ACPI: found 10 devices
> [ 1.284365] ACPI: bus type PNP unregistered
> [ 1.290871] pci 0000:0a:00.0: no compatible bridge window for [mem
> 0xffff0000-0xffffffff pref]
> [ 1.290979] pci 0000:03:00.0: no compatible bridge window for [mem
> 0xfffff800-0xffffffff pref]
> [ 1.291104] pci 0000:09:00.0: bridge window [io 0x1000-0x0fff] to
> [bus 0a] add_size 1000
> [ 1.291118] pci 0000:09:00.0: res[13]=[io 0x1000-0x0fff]
> get_res_add_size add_size 1000
> [ 1.291119] pci 0000:08:00.0: bridge window [io 0x1000-0x0fff] to
> [bus 09-0a] add_size 1000
> [ 1.291135] pci 0000:06:05.0: bridge window [io 0x1000-0x0fff] to
> [bus 6a] add_size 1000
> [ 1.291137] pci 0000:06:05.0: bridge window [mem
> 0x00100000-0x000fffff 64bit pref] to [bus 6a] add_size 200000
> [ 1.291143] pci 0000:06:06.0: bridge window [io 0x1000-0x0fff] to
> [bus 6b] add_size 1000
> [ 1.291145] pci 0000:06:06.0: bridge window [mem
> 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000
> [ 1.291186] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 1.291280] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
> [ 1.291367] pci 0000:00:01.0: bridge window [mem
> 0xc0000000-0xc10fffff]
> [ 1.291457] pci 0000:00:01.0: bridge window [mem
> 0x90000000-0xa1ffffff 64bit pref]
> [ 1.291559] pci 0000:06:05.0: res[15]=[mem 0x00100000-0x000fffff
> 64bit pref] get_res_add_size add_size 200000
> [ 1.291561] pci 0000:06:06.0: res[15]=[mem 0x00100000-0x000fffff
> 64bit pref] get_res_add_size add_size 200000
> [ 1.291562] pci 0000:06:05.0: res[13]=[io 0x1000-0x0fff]
> get_res_add_size add_size 1000
> [ 1.291564] pci 0000:06:06.0: res[13]=[io 0x1000-0x0fff]
> get_res_add_size add_size 1000
> [ 1.291566] pci 0000:06:05.0: BAR 15: can't assign mem pref (size
> 0x200000)
> [ 1.291669] pci 0000:06:06.0: BAR 15: can't assign mem pref (size
> 0x200000)
> [ 1.291757] pci 0000:06:05.0: BAR 13: can't assign io (size 0x1000)
> [ 1.291844] pci 0000:06:06.0: BAR 13: can't assign io (size 0x1000)
> [ 1.291932] pci 0000:06:06.0: BAR 15: can't assign mem pref (size
> 0x200000)
> [ 1.292021] pci 0000:06:06.0: BAR 13: can't assign io (size 0x1000)
> [ 1.292107] pci 0000:06:05.0: BAR 15: can't assign mem pref (size
> 0x200000)
> [ 1.292193] pci 0000:06:05.0: BAR 13: can't assign io (size 0x1000)
> [ 1.292280] pci 0000:06:00.0: PCI bridge to [bus 07]
> [ 1.292368] pci 0000:06:00.0: bridge window [mem
> 0xc1f00000-0xc1ffffff]
> [ 1.292462] pci 0000:08:00.0: res[13]=[io 0x1000-0x0fff]
> get_res_add_size add_size 1000
> [ 1.292464] pci 0000:08:00.0: BAR 13: assigned [io 0x4000-0x4fff]
> [ 1.292560] pci 0000:09:00.0: res[13]=[io 0x1000-0x0fff]
> get_res_add_size add_size 1000
> [ 1.292561] pci 0000:09:00.0: BAR 13: assigned [io 0x4000-0x4fff]
> [ 1.292653] pci 0000:0a:00.0: BAR 6: assigned [mem
> 0xce120000-0xce12ffff pref]
> [ 1.292762] pci 0000:09:00.0: PCI bridge to [bus 0a]
> [ 1.292850] pci 0000:09:00.0: bridge window [io 0x4000-0x4fff]
> [ 1.292944] pci 0000:09:00.0: bridge window [mem
> 0xc2000000-0xc20fffff]
> [ 1.293044] pci 0000:09:00.0: bridge window [mem
> 0xce100000-0xce1fffff 64bit pref]
> [ 1.293151] pci 0000:08:00.0: PCI bridge to [bus 09-0a]
> [ 1.293248] pci 0000:08:00.0: bridge window [io 0x4000-0x4fff]
> [ 1.293340] pci 0000:08:00.0: bridge window [mem
> 0xc2000000-0xc20fffff]
> [ 1.293442] pci 0000:08:00.0: bridge window [mem
> 0xce100000-0xce1fffff 64bit pref]
> [ 1.293550] pci 0000:06:03.0: PCI bridge to [bus 08-38]
> [ 1.293649] pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
> [ 1.293739] pci 0000:06:03.0: bridge window [mem
> 0xc2000000-0xc60fffff]
> [ 1.293829] pci 0000:06:03.0: bridge window [mem
> 0xce100000-0xd21fffff 64bit pref]
> [ 1.293934] pci 0000:06:04.0: PCI bridge to [bus 39-69]
> [ 1.294021] pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
> [ 1.294110] pci 0000:06:04.0: bridge window [mem
> 0xc6100000-0xca0fffff]
> [ 1.294200] pci 0000:06:04.0: bridge window [mem
> 0xd2200000-0xd61fffff 64bit pref]
> [ 1.294304] pci 0000:06:05.0: PCI bridge to [bus 6a]
> [ 1.294390] pci 0000:06:05.0: bridge window [mem
> 0xc1e00000-0xc1efffff]
> [ 1.294484] pci 0000:06:06.0: PCI bridge to [bus 6b]
> [ 1.294573] pci 0000:06:06.0: bridge window [mem
> 0xc1d00000-0xc1dfffff]
> [ 1.294668] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
> [ 1.294753] pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
> [ 1.294840] pci 0000:05:00.0: bridge window [mem
> 0xc1d00000-0xca0fffff]
> [ 1.294930] pci 0000:05:00.0: bridge window [mem
> 0xce100000-0xd61fffff 64bit pref]
> [ 1.295032] pci 0000:00:01.1: PCI bridge to [bus 05-6b]
> [ 1.295119] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
> [ 1.295206] pci 0000:00:01.1: bridge window [mem
> 0xc1d00000-0xce0fffff]
> [ 1.295295] pci 0000:00:01.1: bridge window [mem
> 0xce100000-0xda1fffff 64bit pref]
> [ 1.295396] pci 0000:00:01.2: PCI bridge to [bus 02]
> [ 1.295484] pci 0000:00:01.2: bridge window [mem
> 0xc1b00000-0xc1bfffff]
> [ 1.295579] pci 0000:03:00.0: BAR 6: assigned [mem
> 0xc1830000-0xc18307ff pref]
> [ 1.295688] pci 0000:00:1c.0: PCI bridge to [bus 03]
> [ 1.295777] pci 0000:00:1c.0: bridge window [mem
> 0xc1a00000-0xc1afffff]
> [ 1.295868] pci 0000:00:1c.0: bridge window [mem
> 0xc1800000-0xc18fffff 64bit pref]
> [ 1.295975] pci 0000:00:1c.1: PCI bridge to [bus 04]
> [ 1.296075] pci 0000:00:1c.1: bridge window [mem
> 0xc1900000-0xc19fffff]
> [ 1.296170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.296172] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.296173] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.296175] pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
> [ 1.296176] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
> [ 1.296178] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
> [ 1.296179] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
> [ 1.296180] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff
> 64bit pref]
> [ 1.296182] pci_bus 0000:05: resource 0 [io 0x4000-0x6fff]
> [ 1.296183] pci_bus 0000:05: resource 1 [mem 0xc1d00000-0xce0fffff]
> [ 1.296185] pci_bus 0000:05: resource 2 [mem 0xce100000-0xda1fffff
> 64bit pref]
> [ 1.296186] pci_bus 0000:06: resource 0 [io 0x4000-0x5fff]
> [ 1.296187] pci_bus 0000:06: resource 1 [mem 0xc1d00000-0xca0fffff]
> [ 1.296189] pci_bus 0000:06: resource 2 [mem 0xce100000-0xd61fffff
> 64bit pref]
> [ 1.296190] pci_bus 0000:07: resource 1 [mem 0xc1f00000-0xc1ffffff]
> [ 1.296192] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
> [ 1.296193] pci_bus 0000:08: resource 1 [mem 0xc2000000-0xc60fffff]
> [ 1.296194] pci_bus 0000:08: resource 2 [mem 0xce100000-0xd21fffff
> 64bit pref]
> [ 1.296196] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
> [ 1.296197] pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc20fffff]
> [ 1.296199] pci_bus 0000:09: resource 2 [mem 0xce100000-0xce1fffff
> 64bit pref]
> [ 1.296200] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
> [ 1.296201] pci_bus 0000:0a: resource 1 [mem 0xc2000000-0xc20fffff]
> [ 1.296203] pci_bus 0000:0a: resource 2 [mem 0xce100000-0xce1fffff
> 64bit pref]
> [ 1.296204] pci_bus 0000:39: resource 0 [io 0x5000-0x5fff]
> [ 1.296205] pci_bus 0000:39: resource 1 [mem 0xc6100000-0xca0fffff]
> [ 1.296207] pci_bus 0000:39: resource 2 [mem 0xd2200000-0xd61fffff
> 64bit pref]
> [ 1.296208] pci_bus 0000:6a: resource 1 [mem 0xc1e00000-0xc1efffff]
> [ 1.296210] pci_bus 0000:6b: resource 1 [mem 0xc1d00000-0xc1dfffff]
> [ 1.296211] pci_bus 0000:02: resource 1 [mem 0xc1b00000-0xc1bfffff]
> [ 1.296213] pci_bus 0000:03: resource 1 [mem 0xc1a00000-0xc1afffff]
> [ 1.296214] pci_bus 0000:03: resource 2 [mem 0xc1800000-0xc18fffff
> 64bit pref]
> [ 1.296215] pci_bus 0000:04: resource 1 [mem 0xc1900000-0xc19fffff]
> [ 1.296241] NET: Registered protocol family 2
> [ 1.296609] TCP established hash table entries: 131072 (order: 9,
> 2097152 bytes)
> [ 1.297253] TCP bind hash table entries: 65536 (order: 9, 3670016
> bytes)
> [ 1.297989] TCP: Hash tables configured (established 131072 bind
> 65536)
> [ 1.298100] TCP: reno registered
> [ 1.298278] UDP hash table entries: 8192 (order: 8, 1048576 bytes)
> [ 1.298652] UDP-Lite hash table entries: 8192 (order: 8, 1048576
> bytes)
> [ 1.298995] NET: Registered protocol family 1
> [ 1.299189] pci 0000:00:14.0: can't derive routing for PCI INT A
> [ 1.299283] pci 0000:00:14.0: PCI INT A: no GSI
> [ 1.299480] pci 0000:00:14.0: can't derive routing for PCI INT A
> [ 1.300138] pci 0000:01:00.0: Boot video device
> [ 1.300151] PCI: CLS mismatch (256 != 128), using 64 bytes
> [ 1.300206] Unpacking initramfs...
> [ 1.513591] Freeing initrd memory: 13124K (ffff88003664e000 -
> ffff88003731f000)
> [ 1.513708] dmar: Device scope device [0000:00:02.00] not found
> [ 1.513795] dmar: Device scope device [0000:00:02.00] not found
> [ 1.513881] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 1.513967] software IO TLB [mem 0x86d14000-0x8ad14000] (64MB) mapped
> at [ffff880086d14000-ffff88008ad13fff]
> [ 1.514366] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514373] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514375] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514380] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514384] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514388] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514393] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514399] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
> [ 1.514447] microcode: Microcode Update Driver: v2.00
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 1.515447] audit: initializing netlink socket (disabled)
> [ 1.515550] type=2000 audit(1396220419.495:1): initialized
> [ 1.526857] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.527916] VFS: Disk quotas dquot_6.5.2
> [ 1.528039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.528210] msgmni has been set to 31915
> [ 1.528617] alg: No test for stdrng (krng)
> [ 1.528739] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 252)
> [ 1.528892] io scheduler noop registered
> [ 1.528990] io scheduler deadline registered
> [ 1.529091] io scheduler cfq registered (default)
> [ 1.529344] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
> [ 1.529456] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
> [ 1.529487] pcieport 0000:00:01.2: enabling device (0000 -> 0002)
> [ 1.529694] pcieport 0000:00:01.2: irq 42 for MSI/MSI-X
> [ 1.530062] pcieport 0000:05:00.0: irq 43 for MSI/MSI-X
> [ 1.530154] pcieport 0000:06:00.0: irq 44 for MSI/MSI-X
> [ 1.530247] pcieport 0000:06:03.0: irq 45 for MSI/MSI-X
> [ 1.530346] pcieport 0000:06:04.0: irq 46 for MSI/MSI-X
> [ 1.530405] pcieport 0000:06:05.0: enabling device (0000 -> 0002)
> [ 1.530546] pcieport 0000:06:05.0: irq 47 for MSI/MSI-X
> [ 1.530616] pcieport 0000:06:06.0: enabling device (0000 -> 0002)
> [ 1.530756] pcieport 0000:06:06.0: irq 48 for MSI/MSI-X
> [ 1.530880] pcieport 0000:08:00.0: irq 49 for MSI/MSI-X
> [ 1.531042] pcieport 0000:09:00.0: irq 50 for MSI/MSI-X
> [ 1.531158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.531344] pciehp 0000:06:03.0:pcie24: HPC vendor_id 8086 device_id
> 1547 ss_vid 2222 ss_did 1111
> [ 1.531528] pciehp 0000:06:03.0:pcie24: service driver pciehp loaded
> [ 1.531536] pciehp 0000:06:04.0:pcie24: HPC vendor_id 8086 device_id
> 1547 ss_vid 2222 ss_did 1111
> [ 1.531729] pciehp 0000:06:04.0:pcie24: service driver pciehp loaded
> [ 1.531738] pciehp 0000:06:05.0:pcie24: HPC vendor_id 8086 device_id
> 1547 ss_vid 2222 ss_did 1111
> [ 1.531912] pciehp 0000:06:05.0:pcie24: service driver pciehp loaded
> [ 1.531920] pciehp 0000:06:06.0:pcie24: HPC vendor_id 8086 device_id
> 1547 ss_vid 2222 ss_did 1111
> [ 1.532093] pciehp 0000:06:06.0:pcie24: service driver pciehp loaded
> [ 1.532108] pciehp 0000:09:00.0:pcie24: HPC vendor_id 8086 device_id
> 1549 ss_vid 0 ss_did 0
> [ 1.532296] pciehp 0000:09:00.0:pcie24: service driver pciehp loaded
> [ 1.532300] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [ 1.532415] intel_idle: MWAIT substates: 0x21120
> [ 1.532416] intel_idle: v0.4 model 0x3A
> [ 1.532417] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 1.532602] GHES: HEST is not enabled!
> [ 1.532736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.533232] Linux agpgart interface v0.103
> [ 1.533421] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 2.515255] tsc: Refined TSC clocksource calibration: 2693.889 MHz
> [ 2.633326] i8042: No controller found
> [ 2.633481] mousedev: PS/2 mouse device common for all mice
> [ 2.633604] rtc_cmos 00:05: RTC can wake from S4
> [ 2.633810] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 2.633957] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes
> nvram, hpet irqs
> [ 2.634076] Intel P-state driver initializing.
> [ 2.634169] Intel pstate controlling: cpu 0
> [ 2.634298] Intel pstate controlling: cpu 1
> [ 2.634409] Intel pstate controlling: cpu 2
> [ 2.634510] Intel pstate controlling: cpu 3
> [ 2.634621] Intel pstate controlling: cpu 4
> [ 2.634729] Intel pstate controlling: cpu 5
> [ 2.634840] Intel pstate controlling: cpu 6
> [ 2.634946] Intel pstate controlling: cpu 7
> [ 2.635067] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
> [ 2.635162] AMD IOMMUv2 functionality not available on this system
> [ 2.635332] TCP: cubic registered
> [ 2.635495] NET: Registered protocol family 10
> [ 2.635738] mip6: Mobile IPv6
> [ 2.635830] NET: Registered protocol family 17
> [ 2.635916] mpls_gso: MPLS GSO support
> [ 2.636266] registered taskstats version 1
> [ 2.637271] rtc_cmos 00:05: setting system clock to 2014-03-30
> 23:00:21 UTC (1396220421)
> [ 2.637429] PM: Hibernation image not present or could not be loaded.
> [ 2.638009] Freeing unused kernel memory: 956K (ffffffff818b2000 -
> ffffffff819a1000)
> [ 2.638118] Write protecting the kernel read-only data: 8192k
> [ 2.640647] Freeing unused kernel memory: 1288K (ffff8800014be000 -
> ffff880001600000)
> [ 2.641625] Freeing unused kernel memory: 456K (ffff88000178e000 -
> ffff880001800000)
> [ 2.651679] systemd-udevd[138]: starting version 204
> [ 2.689519] pps_core: LinuxPPS API ver. 1 registered
> [ 2.689658] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti@linux.it>
> [ 2.690137] PTP clock support registered
> [ 2.693001] tg3.c:v3.133 (Jul 29, 2013)
> [ 2.700534] ACPI: bus type USB registered
> [ 2.701160] sdhci: Secure Digital Host Controller Interface driver
> [ 2.701275] usbcore: registered new interface driver usbfs
> [ 2.701473] sdhci: Copyright(c) Pierre Ossman
> [ 2.701669] usbcore: registered new interface driver hub
> [ 2.702368] SCSI subsystem initialized
> [ 2.704016] sdhci-pci 0000:03:00.1: SDHCI controller found
> [14e4:16bc] (rev 10)
> [ 2.705454] libata version 3.00 loaded.
> [ 2.706253] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA
> [ 2.715728] usbcore: registered new device driver usb
> [ 2.716880] ahci 0000:00:1f.2: version 3.0
> [ 2.717041] ahci 0000:00:1f.2: irq 51 for MSI/MSI-X
> [ 2.717108] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
> 0x1 impl SATA mode
> [ 2.717304] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
> part ems apst
> [ 2.717481] ahci 0000:00:1f.2: setting latency timer to 64
> [ 2.719472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 2.720742] ehci-pci: EHCI PCI platform driver
> [ 2.727358] scsi0 : ahci
> [ 2.728377] scsi1 : ahci
> [ 2.729630] scsi2 : ahci
> [ 2.730006] scsi3 : ahci
> [ 2.730249] scsi4 : ahci
> [ 2.731160] scsi5 : ahci
> [ 2.731609] ata1: SATA max UDMA/133 abar m2048@0xc1c16000 port
> 0xc1c16100 irq 51
> [ 2.731907] ata2: DUMMY
> [ 2.732159] ata3: DUMMY
> [ 2.732357] ata4: DUMMY
> [ 2.732537] ata5: DUMMY
> [ 2.732671] ata6: DUMMY
> [ 2.733021] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
> [ 2.733208] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
> [ 2.733446] xhci_hcd 0000:00:14.0: setting latency timer to 64
> [ 2.733453] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 2.733694] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 1
> [ 2.734052] xhci_hcd 0000:00:14.0: cache line size of 64 is not
> supported
> [ 2.734082] xhci_hcd 0000:00:14.0: irq 52 for MSI/MSI-X
> [ 2.734237] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 2.734464] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.734682] usb usb1: Product: xHCI Host Controller
> [ 2.734881] usb usb1: Manufacturer: Linux 3.12.15-rt25 xhci_hcd
> [ 2.735053] usb usb1: SerialNumber: 0000:00:14.0
> [ 2.737642] hub 1-0:1.0: USB hub found
> [ 2.737840] hub 1-0:1.0: 4 ports detected
> [ 2.739159] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 2.739427] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 2
> [ 2.739718] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0003
> [ 2.739922] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.740131] usb usb2: Product: xHCI Host Controller
> [ 2.740376] usb usb2: Manufacturer: Linux 3.12.15-rt25 xhci_hcd
> [ 2.740574] usb usb2: SerialNumber: 0000:00:14.0
> [ 2.740853] hub 2-0:1.0: USB hub found
> [ 2.741071] hub 2-0:1.0: 4 ports detected
> [ 2.751082] tg3 0000:0a:00.0 eth0: Tigon3 [partno(BCM957762) rev
> 57766000] (PCI Express) MAC address a8:20:66:2d:5d:b4
> [ 2.751224] tg3 0000:0a:00.0 eth0: attached PHY is 57765
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [ 2.751327] tg3 0000:0a:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
> ASF[0] TSOcap[1]
> [ 2.751425] tg3 0000:0a:00.0 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> [ 2.762338] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 2.762347] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 2.762463] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
> [ 2.762590] ehci-pci 0000:00:1a.0: debug port 2
> [ 2.766628] ehci-pci 0000:00:1a.0: cache line size of 64 is not
> supported
> [ 2.766673] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc1c16c00
> [ 2.772188] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 2.772338] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 2.772434] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.772530] usb usb3: Product: EHCI Host Controller
> [ 2.772613] usb usb3: Manufacturer: Linux 3.12.15-rt25 ehci_hcd
> [ 2.772697] usb usb3: SerialNumber: 0000:00:1a.0
> [ 2.772939] hub 3-0:1.0: USB hub found
> [ 2.773060] hub 3-0:1.0: 2 ports detected
> [ 2.773324] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 2.773331] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 2.773428] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
> bus number 4
> [ 2.773535] ehci-pci 0000:00:1d.0: debug port 2
> [ 2.777519] ehci-pci 0000:00:1d.0: cache line size of 64 is not
> supported
> [ 2.777700] ehci-pci 0000:00:1d.0: irq 22, io mem 0xc1c16800
> [ 2.783303] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 2.783454] usb usb4: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 2.783565] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.783663] usb usb4: Product: EHCI Host Controller
> [ 2.783746] usb usb4: Manufacturer: Linux 3.12.15-rt25 ehci_hcd
> [ 2.783830] usb usb4: SerialNumber: 0000:00:1d.0
> [ 2.784115] hub 4-0:1.0: USB hub found
> [ 2.784250] hub 4-0:1.0: 2 ports detected
> [ 3.037228] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 3.037842] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 3.038135] ata1.00: ATA-8: APPLE SSD SD512E, 1027AP, max UDMA/133
> [ 3.038264] ata1.00: 977105060 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> [ 3.039058] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 3.039412] ata1.00: configured for UDMA/133
> [ 3.039670] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SD512E
> 1027 PQ: 0 ANSI: 5
> [ 3.049242] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500
> GB/465 GiB)
> [ 3.049370] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 3.049483] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.049575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.049585] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 3.053303] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
> [ 3.053786] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.054872] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.075114] usb 3-1: new high-speed USB device number 2 using
> ehci-pci
> [ 3.125007] EXT4-fs (sda6): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 3.190464] usb 3-1: New USB device found, idVendor=8087,
> idProduct=0024
> [ 3.190582] usb 3-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.190993] hub 3-1:1.0: USB hub found
> [ 3.191189] hub 3-1:1.0: 6 ports detected
> [ 3.294027] usb 4-1: new high-speed USB device number 2 using
> ehci-pci
> [ 3.360115] systemd-udevd[445]: starting version 204
> [ 3.408540] usb 4-1: New USB device found, idVendor=8087,
> idProduct=0024
> [ 3.408664] usb 4-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.409076] hub 4-1:1.0: USB hub found
> [ 3.409334] hub 4-1:1.0: 8 ports detected
> [ 3.434411] input: Lid Switch
> as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> [ 3.434603] ACPI: Lid Switch [LID0]
> [ 3.438555] input: Power Button
> as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 3.438705] ACPI: Power Button [PWRB]
> [ 3.442617] input: Sleep Button
> as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> [ 3.442783] ACPI: Sleep Button [SLPB]
> [ 3.446044] input: Power Button
> as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 3.446090] ACPI: AC Adapter [ADP1] (on-line)
> [ 3.446333] ACPI: Power Button [PWRF]
> [ 3.448274] ACPI: Requesting acpi_cpufreq
> [ 3.450019] mei_me 0000:00:16.0: setting latency timer to 64
> [ 3.450062] mei_me 0000:00:16.0: irq 53 for MSI/MSI-X
> [ 3.473644] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
> [ 3.473914] ACPI: Video Device [GFX0] (multi-head: yes rom: yes
> post: no)
> [ 3.479195] input: Video Bus
> as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input4
> [ 3.481963] [drm] Initialized drm 1.1.0 20060810
> [ 3.484089] usb 3-1.1: new high-speed USB device number 3 using
> ehci-pci
> [ 3.499088] wmi: Mapper loaded
> [ 3.515034] Switched to clocksource tsc
> [ 3.515567] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type
> mismatch - Found [Integer], ACPI requires [Package]
> (20130725/nsarguments-95)
> [ 3.515832] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type
> mismatch - Found [Buffer], ACPI requires [Package]
> (20130725/nsarguments-95)
> [ 3.517964] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7150a2
> [ 3.518052] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
> [ 3.518136] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
> [ 3.518549] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
> [ 3.520072] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for
> image...
> [ 3.520168] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.520250] nouveau [ VBIOS][0000:01:00.0] checking PROM for
> image...
> [ 3.520370] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.520453] nouveau [ VBIOS][0000:01:00.0] checking ACPI for
> image...
> [ 3.520538] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.520622] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for
> image...
> [ 3.520768] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> [ 3.520857] nouveau [ VBIOS][0000:01:00.0] using image from PCIROM
> [ 3.521021] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> [ 3.521114] nouveau [ VBIOS][0000:01:00.0] version 80.07.26.04.01
> [ 3.529417] apple_gmux: gmux device not present
> [ 3.530363] nouveau E[ VBIOS][0000:01:00.0] 0x86ba[ ]: unknown
> opcode 0xdb
> [ 3.530662] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
> [ 3.530777] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
> [ 3.530895] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
> [ 3.546002] input: HDA Intel PCH Headphone
> as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
> [ 3.560079] nouveau [ PTHERM][0000:01:00.0] FAN control: none /
> external
> [ 3.560211] nouveau [ PTHERM][0000:01:00.0] fan management:
> disabled
> [ 3.560330] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
> [ 3.561274] bcma: bus0: Found chip with id 0x4331, rev 0x02 and
> package 0x09
> [ 3.561408] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id
> 0x800, rev 0x25, class 0x0)
> [ 3.571549] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
> 0x812, rev 0x1D, class 0x0)
> [ 3.571714] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820,
> rev 0x13, class 0x0)
> [ 3.593119] usb 3-1.1: New USB device found, idVendor=05ac,
> idProduct=8510
> [ 3.600244] usb 3-1.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 3.601298] [TTM] Zone kernel: Available graphics memory: 8171732
> kiB
> [ 3.601299] [TTM] Zone dma32: Available graphics memory: 2097152
> kiB
> [ 3.601300] [TTM] Initializing pool allocator
> [ 3.601403] [TTM] Initializing DMA pool allocator
> [ 3.601564] nouveau [ DRM] VRAM: 1024 MiB
> [ 3.601565] nouveau [ DRM] GART: 1048576 MiB
> [ 3.601568] nouveau [ DRM] TMDS table version 2.0
> [ 3.601570] nouveau [ DRM] DCB version 4.0
> [ 3.601578] nouveau [ DRM] DCB outp 00: 048101b6 0f230010
> [ 3.601579] nouveau [ DRM] DCB outp 01: 018212d6 0f220020
> [ 3.601580] nouveau [ DRM] DCB outp 02: 01021212 00020020
> [ 3.601581] nouveau [ DRM] DCB outp 03: 088324c6 0f220010
> [ 3.601582] nouveau [ DRM] DCB outp 04: 08032402 00020010
> [ 3.601583] nouveau [ DRM] DCB outp 05: 02843862 00020010
> [ 3.601585] nouveau [ DRM] DCB conn 00: 00020047
> [ 3.601586] nouveau [ DRM] DCB conn 01: 02208146
> [ 3.601596] nouveau [ DRM] DCB conn 02: 01104246
> [ 3.601597] nouveau [ DRM] DCB conn 03: 00410361
> [ 3.614162] ACPI Warning: 0x0000000000000428-0x000000000000042f
> SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
> [ 3.614163] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 3.614169] ACPI Warning: 0x0000000000000530-0x000000000000053f
> SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
> [ 3.614169] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 3.614170] ACPI Warning: 0x0000000000000500-0x000000000000052f
> SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
> [ 3.614171] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 3.614171] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 3.614409] ACPI Warning: 0x000000000000efa0-0x000000000000efbf
> SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1
> (20130725/utaddress-251)
> [ 3.614409] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 3.617368] usb 3-1.1: Product: FaceTime HD Camera (Built-in)
> [ 3.617481] usb 3-1.1: Manufacturer: Apple Inc.
> [ 3.617594] usb 3-1.1: SerialNumber: DJHD1UZ0UPDNYGB0
> [ 3.618049] [drm] Supports vblank timestamp caching Rev 1
> (10.10.2010).
> [ 3.618170] [drm] No driver support for vblank timestamp query.
> [ 3.618308] nouveau W[ DRM] voltage table 0x5a unknown
> [ 3.618422] nouveau [ DRM] 0 available performance level(s)
> [ 3.618533] nouveau [ DRM] c:
> [ 3.624771] bcma: bus0: Bus registered
> [ 3.629422] nouveau [ DRM] MM: using COPY for buffer copies
> [ 3.639611] input: PC Speaker
> as /devices/platform/pcspkr/input/input6
> [ 3.670978] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
> [ 3.676033] nouveau [ DRM] allocated 2880x1800 fb: 0x80000, bo
> ffff8800368af400
> [ 3.676989] fbcon: nouveaufb (fb0) is primary device
> [ 3.683034] alg: No test for crc32 (crc32-pclmul)
> [ 3.701017] usb 4-1.8: new high-speed USB device number 3 using
> ehci-pci
> [ 3.771287] applesmc: key=493 fan=2 temp=44 index=43 acc=0 lux=2
> kbd=1
> [ 3.786268] usb 4-1.8: New USB device found, idVendor=0424,
> idProduct=2512
> [ 3.786269] usb 4-1.8: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.786516] hub 4-1.8:1.0: USB hub found
> [ 3.786603] hub 4-1.8:1.0: 2 ports detected
> [ 3.996887] ACPI: Battery Slot [BAT0] (battery present)
> [ 4.011869] iTCO_vendor_support: vendor-support=0
> [ 4.013116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 4.013195] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled
> by hardware/BIOS
> [ 4.032143] cfg80211: Calling CRDA to update world regulatory domain
> [ 4.048619] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
> [ 4.049039] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
> [ 4.050015] Broadcom 43xx driver loaded [ Features: PMNLS ]
> [ 4.054698] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht'
> [ 4.057389] media: Linux media interface: v0.10
> [ 4.059931] usb 4-1.8.1: new full-speed USB device number 4 using
> ehci-pci
> [ 4.060173] Linux video capture interface: v2.00
> [ 4.063844] cfg80211: World regulatory domain updated:
> [ 4.063845] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 4.063846] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (N/A, 2000 mBm)
> [ 4.063847] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
> (N/A, 2000 mBm)
> [ 4.063848] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
> (N/A, 2000 mBm)
> [ 4.063848] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz),
> (N/A, 2000 mBm)
> [ 4.063849] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
> (N/A, 2000 mBm)
> [ 4.063849] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
> (N/A, 0 mBm)
> [ 4.065282] uvcvideo: Found UVC 1.00 device FaceTime HD Camera
> (Built-in) (05ac:8510)
> [ 4.076216] input: FaceTime HD Camera (Built-in)
> as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input7
> [ 4.076259] usbcore: registered new interface driver uvcvideo
> [ 4.076259] USB Video Class driver (1.1.1)
> [ 4.146867] usb 4-1.8.1: New USB device found, idVendor=0a5c,
> idProduct=4500
> [ 4.146868] usb 4-1.8.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 4.146869] usb 4-1.8.1: Product: BRCM20702 Hub
> [ 4.146869] usb 4-1.8.1: Manufacturer: Apple Inc.
> [ 4.147207] hub 4-1.8.1:1.0: USB hub found
> [ 4.147364] hub 4-1.8.1:1.0: 3 ports detected
> [ 4.149220] Console: switching to colour frame buffer device 360x112
> [ 4.156111] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
> [ 4.156112] nouveau 0000:01:00.0: registered panic notifier
> [ 4.156123] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0
> on minor 0
> [ 4.156218] hda_intel: Disabling MSI
> [ 4.156229] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio
> client
> [ 4.220960] usb 4-1.8.2: new full-speed USB device number 5 using
> ehci-pci
> [ 4.314322] usb 4-1.8.2: New USB device found, idVendor=05ac,
> idProduct=0263
> [ 4.314340] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 4.314349] usb 4-1.8.2: Product: Apple Internal Keyboard / Trackpad
> [ 4.314354] usb 4-1.8.2: Manufacturer: Apple Inc.
> [ 4.323255] input: HDA NVidia HDMI/DP,pcm=8
> as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
> [ 4.323840] input: HDA NVidia HDMI/DP,pcm=7
> as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
> [ 4.324414] input: HDA NVidia HDMI/DP,pcm=3
> as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
> [ 4.332580] hidraw: raw HID events driver (C) Jiri Kosina
> [ 4.335674] input: bcm5974
> as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.2/input/input11
> [ 4.336708] usbcore: registered new interface driver bcm5974
> [ 4.341214] usbcore: registered new interface driver usbhid
> [ 4.341224] usbhid: USB HID core driver
> [ 4.353735] input: Apple Inc. Apple Internal Keyboard / Trackpad
> as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.0/input/input12
> [ 4.354004] apple 0003:05AC:0263.0001: input,hidraw0: USB HID v1.11
> Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on
> usb-0000:00:1d.0-1.8.2/input0
> [ 4.409781] usb 4-1.8.1.1: new full-speed USB device number 6 using
> ehci-pci
> [ 4.459550] apple 0003:05AC:0263.0002: hidraw1: USB HID v1.11 Device
> [Apple Inc. Apple Internal Keyboard / Trackpad] on
> usb-0000:00:1d.0-1.8.2/input1
> [ 4.486811] usb 4-1.8.1.1: New USB device found, idVendor=05ac,
> idProduct=820a
> [ 4.486825] usb 4-1.8.1.1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 4.550779] usb 4-1.8.1.2: new full-speed USB device number 7 using
> ehci-pci
> [ 4.609781] EXT4-fs (sda6): re-mounted. Opts: (null)
> [ 4.628114] usb 4-1.8.1.2: New USB device found, idVendor=05ac,
> idProduct=820b
> [ 4.628126] usb 4-1.8.1.2: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 4.632399] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
> [ 4.691719] usb 4-1.8.1.3: new full-speed USB device number 8 using
> ehci-pci
> [ 4.744687] lp: driver loaded but no devices found
> [ 4.748957] ppdev: user-space parallel port driver
> [ 4.759706] fuse init (API version 7.22)
> [ 4.769665] usb 4-1.8.1.3: New USB device found, idVendor=05ac,
> idProduct=8286
> [ 4.770240] usb 4-1.8.1.3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 4.770241] usb 4-1.8.1.3: Product: Bluetooth USB Host Controller
> [ 4.770242] usb 4-1.8.1.3: Manufacturer: Apple Inc.
> [ 4.792971] input: HID 05ac:820a
> as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.1/4-1.8.1.1:1.0/input/input13
> [ 4.793869] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID
> v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
> [ 4.794797] input: HID 05ac:820b
> as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.2/4-1.8.1.2:1.0/input/input14
> [ 4.795864] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID
> v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
> [ 4.798149] Bluetooth: Core ver 2.16
> [ 4.798786] NET: Registered protocol family 31
> [ 4.799855] Bluetooth: HCI device and connection manager initialized
> [ 4.800958] Bluetooth: HCI socket layer initialized
> [ 4.802054] Bluetooth: L2CAP socket layer initialized
> [ 4.803145] Bluetooth: SCO socket layer initialized
> [ 4.806824] usbcore: registered new interface driver btusb
> [ 4.829661] usb 4-1.8.1.1: USB disconnect, device number 6
> [ 4.979433] RPC: Registered named UNIX socket transport module.
> [ 4.980042] RPC: Registered udp transport module.
> [ 4.981137] RPC: Registered tcp transport module.
> [ 4.982230] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 4.986064] FS-Cache: Loaded
> [ 4.992001] FS-Cache: Netfs 'nfs' registered for caching
> [ 4.998262] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 5.030871] usb 4-1.8.1.2: USB disconnect, device number 7
> [ 5.398028] Bluetooth: RFCOMM TTY layer initialized
> [ 5.398640] Bluetooth: RFCOMM socket layer initialized
> [ 5.399687] Bluetooth: RFCOMM ver 1.11
> [ 5.401942] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 5.402519] Bluetooth: BNEP filters: protocol multicast
> [ 5.403567] Bluetooth: BNEP socket layer initialized
Now, I know what this is good for!
if(audio_loop->play_recall_ref == 0 &&
audio_loop->play_channel_ref == 0 &&
audio_loop->play_audio_ref == 0 &&
audio_loop->play_notation_ref == 0){
static const struct timespec req = {
0,
250000000,
};
if((AGS_THREAD_RUNNING &
(AGS_THREAD(audio_loop->devout_thread)->flags)) != 0){
ags_thread_stop(AGS_THREAD(audio_loop->devout_thread));
}
nanosleep(&req, NULL);
}
prev parent reply other threads:[~2014-03-31 0:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-29 16:14 vmlinuz-3.12.13-rt21 freezed by application Joël Krähemann
2014-03-29 17:40 ` Joël Krähemann
2014-03-30 23:29 ` Joël Krähemann
2014-03-31 0:26 ` Joël Krähemann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396225592.6272.0.camel@debian \
--to=joel@weedlight.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.