From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Date: Thu, 3 Apr 2014 18:19:25 -0500 [thread overview]
Message-ID: <1396567167-17596-7-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1396567167-17596-1-git-send-email-nm@ti.com>
Boot from zImage and fdt_file if uImage is not available to maintain
the legacy behavior.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
include/configs/omap3_zoom1.h | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 110e3db..e0ab1db 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -45,6 +45,7 @@
#define CONFIG_REVISION_TAG 1
#define CONFIG_OF_LIBFDT 1
+#define CONFIG_CMD_BOOTZ 1
/*
* Size of malloc() pool
@@ -155,7 +156,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdtaddr=0x80f80000\0" \
"bootfile=uImage\0" \
+ "fdtfile=omap3-ldp.dtb\0" \
"bootdir=/\0" \
"bootpart=0:1\0" \
"usbtty=cdc_acm\0" \
@@ -175,9 +179,14 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
+ "mmczboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${loadaddr} 280000 400000; " \
@@ -190,8 +199,10 @@
"else " \
"if run loadimage; then " \
"run mmcboot; " \
+ "else if run loadzimage; then " \
+ "run mmczboot; " \
"else run nandboot; " \
- "fi; " \
+ "fi; fi;" \
"fi; " \
"else run nandboot; fi"
--
1.7.9.5
next prev parent reply other threads:[~2014-04-03 23:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-03 23:19 [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :( Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 1/7] omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 2/7] OMAP3: zoom1: Configure GPMC for Ethernet Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 3/7] OMAP3: zoom1: enable LAN9211 Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 4/7] omap3: zoom1: enable common network commands Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 5/7] omap3: zoom1: disable JFFS2 and enable FS_GENERIC Nishanth Menon
2014-04-07 14:27 ` Tom Rini
2014-04-03 23:19 ` Nishanth Menon [this message]
2014-04-07 14:29 ` [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz Tom Rini
2014-04-08 14:35 ` Nishanth Menon
2014-04-08 16:22 ` Tom Rini
2014-04-08 16:25 ` Nishanth Menon
2014-04-03 23:19 ` [U-Boot] [PATCH 7/7] omap3: zoom1: fix default console Nishanth Menon
2014-04-07 14:25 ` [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :( Tom Rini
2014-04-08 14:40 ` Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 0/8] " Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 1/8] omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 2/8] OMAP3: zoom1: Configure GPMC for Ethernet Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 3/8] OMAP3: zoom1: enable LAN9211 Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 4/8] omap3: zoom1: enable common network commands Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 5/8] omap3: zoom1: disable JFFS2 and enable FS_GENERIC Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 6/8] omap3: zoom1: enable bootz Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 7/8] omap3: zoom1: fix default console Nishanth Menon
2014-04-08 14:50 ` [U-Boot] [PATCH V2 8/8] omap3: zoom1: switch to generic ti_omap3_common config header Nishanth Menon
2014-04-18 13:23 ` [U-Boot] [PATCH V2 0/8] omap3: zoom1: long pending cleanups :( Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396567167-17596-7-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.