[B.A.T.M.A.N.] [PATCH 1/7] cfg80211: export expected throughput through get_station()

[Antonio Quartulli <antonio@meshcoding.com>]

From: Antonio Quartulli <antonio@open-mesh.com>

Users may need information about the expected throughput
towards a given peer computed by the RC algorithm.
Export such value in Mbps/100 through the get_station() API.
This unit has been chosen because it is the same of the
throughput returned by MinstrelHT.

This information will be useful to the batman-adv module
which will use it for its new metric computation.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---

Changes since the RFC:
- Change all the station_info_flags to use BIT()
- Properly comment about the unit used by the throughput value
- added new ieee80211_ops.get_expected_throughput() API (to support drivers
  having HW RC)
- improved doc about new cfg80211_get_station() function
- minor cleanups


 include/net/cfg80211.h | 63 ++++++++++++++++++++++++++++----------------------
 1 file changed, 35 insertions(+), 28 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9496fe5..d4b85f7 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -862,36 +862,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
  * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
  * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
+ * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
  */
 enum station_info_flags {
-	STATION_INFO_INACTIVE_TIME	= 1<<0,
-	STATION_INFO_RX_BYTES		= 1<<1,
-	STATION_INFO_TX_BYTES		= 1<<2,
-	STATION_INFO_LLID		= 1<<3,
-	STATION_INFO_PLID		= 1<<4,
-	STATION_INFO_PLINK_STATE	= 1<<5,
-	STATION_INFO_SIGNAL		= 1<<6,
-	STATION_INFO_TX_BITRATE		= 1<<7,
-	STATION_INFO_RX_PACKETS		= 1<<8,
-	STATION_INFO_TX_PACKETS		= 1<<9,
-	STATION_INFO_TX_RETRIES		= 1<<10,
-	STATION_INFO_TX_FAILED		= 1<<11,
-	STATION_INFO_RX_DROP_MISC	= 1<<12,
-	STATION_INFO_SIGNAL_AVG		= 1<<13,
-	STATION_INFO_RX_BITRATE		= 1<<14,
-	STATION_INFO_BSS_PARAM          = 1<<15,
-	STATION_INFO_CONNECTED_TIME	= 1<<16,
-	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
-	STATION_INFO_STA_FLAGS		= 1<<18,
-	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
-	STATION_INFO_T_OFFSET		= 1<<20,
-	STATION_INFO_LOCAL_PM		= 1<<21,
-	STATION_INFO_PEER_PM		= 1<<22,
-	STATION_INFO_NONPEER_PM		= 1<<23,
-	STATION_INFO_RX_BYTES64		= 1<<24,
-	STATION_INFO_TX_BYTES64		= 1<<25,
-	STATION_INFO_CHAIN_SIGNAL	= 1<<26,
-	STATION_INFO_CHAIN_SIGNAL_AVG	= 1<<27,
+	STATION_INFO_INACTIVE_TIME		= BIT(0),
+	STATION_INFO_RX_BYTES			= BIT(1),
+	STATION_INFO_TX_BYTES			= BIT(2),
+	STATION_INFO_LLID			= BIT(3),
+	STATION_INFO_PLID			= BIT(4),
+	STATION_INFO_PLINK_STATE		= BIT(5),
+	STATION_INFO_SIGNAL			= BIT(6),
+	STATION_INFO_TX_BITRATE			= BIT(7),
+	STATION_INFO_RX_PACKETS			= BIT(8),
+	STATION_INFO_TX_PACKETS			= BIT(9),
+	STATION_INFO_TX_RETRIES			= BIT(10),
+	STATION_INFO_TX_FAILED			= BIT(11),
+	STATION_INFO_RX_DROP_MISC		= BIT(12),
+	STATION_INFO_SIGNAL_AVG			= BIT(13),
+	STATION_INFO_RX_BITRATE			= BIT(14),
+	STATION_INFO_BSS_PARAM			= BIT(15),
+	STATION_INFO_CONNECTED_TIME		= BIT(16),
+	STATION_INFO_ASSOC_REQ_IES		= BIT(17),
+	STATION_INFO_STA_FLAGS			= BIT(18),
+	STATION_INFO_BEACON_LOSS_COUNT		= BIT(19),
+	STATION_INFO_T_OFFSET			= BIT(20),
+	STATION_INFO_LOCAL_PM			= BIT(21),
+	STATION_INFO_PEER_PM			= BIT(22),
+	STATION_INFO_NONPEER_PM			= BIT(23),
+	STATION_INFO_RX_BYTES64			= BIT(24),
+	STATION_INFO_TX_BYTES64			= BIT(25),
+	STATION_INFO_CHAIN_SIGNAL		= BIT(26),
+	STATION_INFO_CHAIN_SIGNAL_AVG		= BIT(27),
+	STATION_INFO_EXPECTED_THROUGHPUT	= BIT(28),
 };
 
 /**
@@ -1013,6 +1015,9 @@ struct sta_bss_parameters {
  * @local_pm: local mesh STA power save mode
  * @peer_pm: peer mesh STA power save mode
  * @nonpeer_pm: non-peer mesh STA power save mode
+ * @expected_throughput: expected throughput in Mbps/100 reported by the RC
+ *	algorithm towards this station. The unit of this value has been chosen
+ *	because it is the same of the throughput returned by MinstrelHT
  */
 struct station_info {
 	u32 filled;
@@ -1051,6 +1056,8 @@ struct station_info {
 	enum nl80211_mesh_power_mode peer_pm;
 	enum nl80211_mesh_power_mode nonpeer_pm;
 
+	u32 expected_throughput;
+
 	/*
 	 * Note: Add a new enum station_info_flags value for each new field and
 	 * use it to check which fields are initialized.
-- 
1.8.3.2