All of lore.kernel.org
 help / color / mirror / Atom feed
From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>
Subject: [PATCH 2/2] drm/i915: Set up SDVO encoder type only at detect
Date: Mon, 14 Apr 2014 19:26:09 +0200	[thread overview]
Message-ID: <1397496369-2746-3-git-send-email-eich@suse.de> (raw)
In-Reply-To: <1397496369-2746-1-git-send-email-eich@suse.de>

Depending on the SDVO output_flags SDVO may have multiple connectors.
These are all initialized in intel_sdvo_output_setup(). The connector
that is initialized later will override the encoder_type that has been
set up by an earlier connector type initialization. Eventually the
one that comes last wins.
Eventually when intel_sdvo_detect() is called the active connector is
determined.
Delay encoder type initialization until the active connector is known
and set it to the type that corresponds to this connector.

Signed-off-by: Egbert Eich <eich@suse.de>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d27155a..5043f16 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -154,6 +154,9 @@ struct intel_sdvo_connector {
 	/* Mark the type of connector */
 	uint16_t output_flag;
 
+	/* store encoder type for convenience */
+	int encoder_type;
+
 	enum hdmi_force_audio force_audio;
 
 	/* This contains all current supported TV format */
@@ -1746,6 +1749,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 	if (response == 0)
 		return connector_status_disconnected;
 
+	intel_sdvo->base.base.encoder_type = intel_sdvo_connector->encoder_type;
 	intel_sdvo->attached_output = response;
 
 	intel_sdvo->has_hdmi_monitor = false;
@@ -2489,7 +2493,9 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 	} else {
 		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 	}
-	encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+	/* delay encoder_type setting until detection */
+	intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_TMDS;
+	encoder->encoder_type = DRM_MODE_ENCODER_NONE;
 	connector->connector_type = DRM_MODE_CONNECTOR_DVID;
 
 	if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
@@ -2524,7 +2530,9 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 
 	intel_connector = &intel_sdvo_connector->base;
 	connector = &intel_connector->base;
-	encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+	/* delay encoder_type setting until detection */
+	intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_TVDAC;
+	encoder->encoder_type = DRM_MODE_ENCODER_NONE;
 	connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
 
 	intel_sdvo->controlled_output |= type;
@@ -2568,7 +2576,9 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
 	intel_connector = &intel_sdvo_connector->base;
 	connector = &intel_connector->base;
 	intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-	encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+	/* delay encoder_type setting until detection */
+	intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_DAC;
+	encoder->encoder_type = DRM_MODE_ENCODER_NONE;
 	connector->connector_type = DRM_MODE_CONNECTOR_VGA;
 
 	if (device == 0) {
@@ -2603,7 +2613,9 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 
 	intel_connector = &intel_sdvo_connector->base;
 	connector = &intel_connector->base;
-	encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+	/* delay encoder_type setting until detection */
+	intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_LVDS;
+	encoder->encoder_type = DRM_MODE_ENCODER_NONE;
 	connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
 
 	if (device == 0) {
@@ -2984,7 +2996,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	/* encoder type will be decided later */
 	intel_encoder = &intel_sdvo->base;
 	intel_encoder->type = INTEL_OUTPUT_SDVO;
-	drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
+	drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs,
+			 DRM_MODE_ENCODER_NONE);
 
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
-- 
1.8.4.5

  parent reply	other threads:[~2014-04-14 17:26 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-14 17:26 [PATCH 0/2] Fix if multiple SDVO outputs are flagged Egbert Eich
2014-04-14 17:26 ` [PATCH 1/2] drm/i915: Only break encoder linked when linked to connector Egbert Eich
2014-04-15  7:46   ` Chris Wilson
2014-04-15  9:14     ` Egbert Eich
2014-04-15 19:08   ` Daniel Vetter
2014-04-16  6:04     ` Egbert Eich
2014-04-16  9:16     ` [PATCH] drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc() Egbert Eich
2014-04-16 11:42       ` Daniel Vetter
2014-04-25  8:56         ` [PATCH v3] " Egbert Eich
2014-04-25 11:28           ` Jani Nikula
2014-04-14 17:26 ` Egbert Eich [this message]
2014-04-15  9:39   ` [PATCH 2/2] drm/i915: Set up SDVO encoder type only at detect Chris Wilson
2014-04-15 19:14     ` [PATCH v2] " Egbert Eich
2014-04-15 19:19       ` Chris Wilson
2014-04-15 19:12   ` [PATCH 2/2] " Daniel Vetter
2014-04-16  5:58     ` Egbert Eich
2014-04-16  7:55       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397496369-2746-3-git-send-email-eich@suse.de \
    --to=eich@suse.de \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.