From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH v5 0/9] mfd: max14577: Add support for MAX77836
Date: Wed, 16 Apr 2014 12:44:38 +0200 [thread overview]
Message-ID: <1397645078.6147.11.camel@AMDC1943> (raw)
In-Reply-To: <20140416102846.GL4754@lee--X1>
On śro, 2014-04-16 at 11:28 +0100, Lee Jones wrote:
> > This is first part of fifth version of patchset adding support for
> > MAX77836 device to the max14577 driver.
> >
> > I decided to split the patchset into smaller parts. I hope this would
> > help in getting necessary review/acks from maintainers.
> >
> > The first part introduces changes in max14577 driver and adds support
> > for MAX77836 in MFD, extcon and regulator drivers. Most of these
> > patches already have required acks from maintainers.
> > Full v4 patchset can be found here:
> > http://thread.gmane.org/gmane.linux.kernel/1654267
>
> So what's the plan for this driver now? What's missing? Do you have
> all the Acks you need? If so, I'm happy to apply this patch-set and
> supply a pull-request to the other maintainers.
Next patches (part 2):
1. charger: max14577: Add support for MAX77836 charger
2. power: max17040: Add ID for MAX77836 Fuel Gauge block
3. regulator/mfd: max14577: Export symbols for calculating charger
current
4. charger: max14577: Configure battery-dependent settings from DTS
5. Documentation: mfd: max14577: Add device tree bindings document
6. regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s
They are quite independent from each other so I think it would be the
best if you could prepare an immutable branch with first part of
patches.
Best regards,
Krzysztof
>
> > Changes since v4
> > ================
> > 1. Updated Kconfig entries mentioning MAX77836.
> > 2. Removed rename-like patches:
> > [PATCH v4 02/16] mfd: max14577: Rename and add MAX14577 symbols
> > [PATCH v4 03/16] mfd: max14577: Rename state container to maxim_core
> > 3. Added new patches (not yet reviewed):
> > [PATCH v5 2/9] mfd: max14577: Add muic prefix to regmap config
> > [PATCH v5 6/9] mfd: max14577: Add MAX14577 prefix to IRQ defines
> > 4. Rebased on 3.15-rc1.
> >
> > Changes since v3
> > ================
> > 1. Applied minor fixes (pointed by Lee Jones).
> > 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa).
> > 3. Patch 14/charger: Minor change in parsing EOC value from DTS.
> > 4. Rebased on next-20140224.
> >
> > Changes since v2
> > ================
> > 1. Added ACK-s.
> > 2. Applied minor checkpatch fixes (pointed by Lee Jones).
> > 3. Rebased on next-20140217.
> >
> > Changes since v1
> > ================
> > 1. Added ACK-s, reviews and tested-by tags.
> > 2. Removed applied patches (they were merged to the linux-next tree).
> > 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type)
> > and 8/15 (add max77836 support to max14577).
> > 4. Rebased on next tree.
> > 5. Added patch 13 and 14 (pointed by Jenny Tc):
> > - regulator/mfd: max14577: Export symbols for calculating charger current
> > - charger: max14577: Configure battery-dependent settings from DTS
> > 6. Updated bindings documentation with new charger bindings.
> > Previous thread:
> > - [PATCH 00/18] mfd: max14577: Add support for MAX77836
> > http://thread.gmane.org/gmane.linux.kernel/1636654/focus=1636674
> >
> >
> > Description
> > ===========
> > The MAX77836 is almost the same as MAX14577. Basically it is an extended
> > version of MAX14577. The chipsets have same MUIC component so the extcon,
> > charger and regulators require only little adjustments. More changes were
> > needed in the charger (because it uses lower charging current) and regulator
> > drivers (because mentioned different charing current and additional
> > regulators). The MAX77836 has also PMIC and Fuel Gauge (which is the same
> > as MAX17040/17048 Fuel Gauge).
> >
> > The MAX77836 uses three I2C slave addresses and has additional interrupts
> > (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> > just like MAX77686 and MAX77693.
> >
> >
> > Best regards,
> > Krzysztof Kozlowski
> >
> >
> > Chanwoo Choi (1):
> > extcon: max14577: Change extcon name instead of static name according
> > to device type
> >
> > Krzysztof Kozlowski (8):
> > mfd: max14577: Add muic prefix to regmap config
> > mfd: max14577: Add detection of device type
> > extcon: max14577: Add max14577 prefix to muic_irqs
> > extcon: max14577: Choose muic_irqs according to device type
> > mfd: max14577: Add MAX14577 prefix to IRQ defines
> > mfd: max77836: Add MAX77836 support to max14577 driver
> > extcon: max14577: Add support for MAX77836
> > regulator: max14577: Add support for MAX77836 regulators
> >
> > drivers/extcon/Kconfig | 4 +-
> > drivers/extcon/extcon-max14577.c | 174 +++++++++++++------
> > drivers/mfd/Kconfig | 6 +-
> > drivers/mfd/max14577.c | 315 ++++++++++++++++++++++++++++++-----
> > drivers/regulator/Kconfig | 7 +-
> > drivers/regulator/max14577.c | 277 ++++++++++++++++++++++++++----
> > include/linux/mfd/max14577-private.h | 222 ++++++++++++++++++------
> > include/linux/mfd/max14577.h | 19 ++-
> > 8 files changed, 836 insertions(+), 188 deletions(-)
> >
>
next prev parent reply other threads:[~2014-04-16 10:44 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 9:17 [PATCH v5 0/9] mfd: max14577: Add support for MAX77836 Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 1/9] extcon: max14577: Change extcon name instead of static name according to device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 2/9] mfd: max14577: Add muic prefix to regmap config Krzysztof Kozlowski
2014-04-15 6:36 ` Chanwoo Choi
2014-04-16 10:22 ` Lee Jones
2014-04-14 9:17 ` [PATCH v5 3/9] mfd: max14577: Add detection of device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 4/9] extcon: max14577: Add max14577 prefix to muic_irqs Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 5/9] extcon: max14577: Choose muic_irqs according to device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 6/9] mfd: max14577: Add MAX14577 prefix to IRQ defines Krzysztof Kozlowski
2014-04-15 6:37 ` Chanwoo Choi
2014-04-16 10:27 ` Lee Jones
2014-04-14 9:17 ` [PATCH v5 7/9] mfd: max77836: Add MAX77836 support to max14577 driver Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 8/9] extcon: max14577: Add support for MAX77836 Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 9/9] regulator: max14577: Add support for MAX77836 regulators Krzysztof Kozlowski
2014-04-15 6:50 ` [PATCH v5 0/9] mfd: max14577: Add support for MAX77836 Chanwoo Choi
2014-04-16 10:28 ` Lee Jones
2014-04-16 10:44 ` Krzysztof Kozlowski [this message]
2014-04-16 10:51 ` Chanwoo Choi
2014-04-16 11:02 ` Krzysztof Kozlowski
2014-04-16 11:36 ` Chanwoo Choi
2014-04-16 12:17 ` Lee Jones
2014-04-16 14:21 ` Chanwoo Choi
2014-04-16 11:08 ` Lee Jones
2014-04-16 11:13 ` Krzysztof Kozlowski
2014-04-16 12:18 ` Lee Jones
2014-04-23 11:52 ` Krzysztof Kozlowski
2014-04-23 13:04 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397645078.6147.11.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.