[PATCH 4/4] wl1251: only call ieee80211_beacon_loss in managed mode

[Grazvydas Ignotas <notasas@gmail.com>]

ieee80211_beacon_loss() is only to be called in managed mode,
but the firmware may send the sync timeout event at any time,
so do a check before calling.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
---
 drivers/net/wireless/ti/wl1251/event.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c
index db01053..c986303 100644
--- a/drivers/net/wireless/ti/wl1251/event.c
+++ b/drivers/net/wireless/ti/wl1251/event.c
@@ -124,11 +124,12 @@ static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox)
 			return ret;
 	}
 
-	if (wl->vif && vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
+	if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
 		wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
 
 		/* indicate to the stack, that beacons have been lost */
-		ieee80211_beacon_loss(wl->vif);
+		if (wl->vif && wl->vif->type == NL80211_IFTYPE_STATION)
+			ieee80211_beacon_loss(wl->vif);
 	}
 
 	if (vector & REGAINED_BSS_EVENT_ID) {
-- 
1.7.9.5