From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Keepax Subject: [PATCH] ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile Date: Tue, 13 May 2014 13:45:15 +0100 Message-ID: <1399985115-29117-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 4DBEA2654C9 for ; Tue, 13 May 2014 14:52:59 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: shawn.guo@linaro.org, broonie@kernel.org Cc: alsa-devel@alsa-project.org, lars@metafoo.de, lgirdwood@gmail.com, patches@opensource.wolfsonmicro.com List-Id: alsa-devel@alsa-project.org The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo Signed-off-by: Charles Keepax --- Hi Shawn, I am afraid I don't have access to hardware for 8962 at the moment, so have only build tested this, but I believe it should fix your issue. Please let me know how you get on. Thanks, Charles sound/soc/codecs/wm8962.c | 15 ++++++++++++--- sound/soc/codecs/wm8962.h | 4 ++++ 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 5522d25..ecd26dd 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] = { { 40, 0x0000 }, /* R40 - SPKOUTL volume */ { 41, 0x0000 }, /* R41 - SPKOUTR volume */ + { 49, 0x0010 }, /* R49 - Class D Control 1 */ { 51, 0x0003 }, /* R51 - Class D Control 2 */ { 56, 0x0506 }, /* R56 - Clocking 4 */ @@ -795,7 +796,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg) case WM8962_ALC2: case WM8962_THERMAL_SHUTDOWN_STATUS: case WM8962_ADDITIONAL_CONTROL_4: - case WM8962_CLASS_D_CONTROL_1: case WM8962_DC_SERVO_6: case WM8962_INTERRUPT_STATUS_1: case WM8962_INTERRUPT_STATUS_2: @@ -2929,13 +2929,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, static int wm8962_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; - int val; + int val, ret; if (mute) - val = WM8962_DAC_MUTE; + val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT; else val = 0; + /** + * The DAC mute bit is mirrored in two registers, update both to keep + * the register cache consistent. + */ + ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1, + WM8962_DAC_MUTE_ALT, val); + if (ret < 0) + return ret; + return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, WM8962_DAC_MUTE, val); } diff --git a/sound/soc/codecs/wm8962.h b/sound/soc/codecs/wm8962.h index a1a5d52..910aafd 100644 --- a/sound/soc/codecs/wm8962.h +++ b/sound/soc/codecs/wm8962.h @@ -1954,6 +1954,10 @@ #define WM8962_SPKOUTL_ENA_MASK 0x0040 /* SPKOUTL_ENA */ #define WM8962_SPKOUTL_ENA_SHIFT 6 /* SPKOUTL_ENA */ #define WM8962_SPKOUTL_ENA_WIDTH 1 /* SPKOUTL_ENA */ +#define WM8962_DAC_MUTE_ALT 0x0010 /* DAC_MUTE */ +#define WM8962_DAC_MUTE_ALT_MASK 0x0010 /* DAC_MUTE */ +#define WM8962_DAC_MUTE_ALT_SHIFT 4 /* DAC_MUTE */ +#define WM8962_DAC_MUTE_ALT_WIDTH 1 /* DAC_MUTE */ #define WM8962_SPKOUTL_PGA_MUTE 0x0002 /* SPKOUTL_PGA_MUTE */ #define WM8962_SPKOUTL_PGA_MUTE_MASK 0x0002 /* SPKOUTL_PGA_MUTE */ #define WM8962_SPKOUTL_PGA_MUTE_SHIFT 1 /* SPKOUTL_PGA_MUTE */ -- 1.7.2.5