From: BALATON Zoltan <balaton@eik.bme.hu>
To: Bernhard Beschow <shentey@gmail.com>
Cc: qemu-devel@nongnu.org, "Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Huacai Chen" <chenhuacai@kernel.org>,
qemu-ppc@nongnu.org
Subject: Re: [PATCH 1/9] hw/isa/vt82c686: QOM'ify Super I/O creation
Date: Tue, 23 Aug 2022 02:35:48 +0200 (CEST) [thread overview]
Message-ID: <13a01ca9-ee32-2784-227c-2f6331e224dd@eik.bme.hu> (raw)
In-Reply-To: <20220822224355.11753-2-shentey@gmail.com>
On Tue, 23 Aug 2022, Bernhard Beschow wrote:
> The object creation now happens in chip-specific init methods which
> allows the realize methods to be consolidated into one method. Shifting
> the logic into the init methods has the addidional advantage that the
> parent object's init methods are called implicitly.
This and later patches titled "QOM'ify" don't do what I understand on
QOMifying which is turining an old device model into a QOM object. These
devices are already QOMified, what's really done here is that they are
moved to the ViaISAState or embedded into it and created as part of the
south bridge rather then individually by the boards. Either my
understanding of what QOMify means is wrong or these patches are misnamed.
Technically via_isa_realize() is the realize method of the abstract
TYPE_VIA_ISA class which were overriden by the subclasses but since QOM
does not call overridden methods implicitly this had to be explicitly
called in the overriding realize methods of the subclasses. Now that we
don't have to ovverride the method maybe it could be set once on the
VIA_ISA class then it may work that way but as it's done here is also OK
maybe as a reminder that this super class method should be called by any
overriding method if one's added in the future for some reason.
Regards,
BALATON Zoltan
> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
> ---
> hw/isa/vt82c686.c | 33 ++++++++++++++++++---------------
> 1 file changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
> index 8f656251b8..0217c98fe4 100644
> --- a/hw/isa/vt82c686.c
> +++ b/hw/isa/vt82c686.c
> @@ -544,7 +544,7 @@ struct ViaISAState {
> qemu_irq cpu_intr;
> qemu_irq *isa_irqs;
> ISABus *isa_bus;
> - ViaSuperIOState *via_sio;
> + ViaSuperIOState via_sio;
> };
>
> static const VMStateDescription vmstate_via = {
> @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error **errp)
> d->wmask[i] = 0;
> }
> }
> +
> + /* Super I/O */
> + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) {
> + return;
> + }
> }
>
> /* TYPE_VT82C686B_ISA */
> @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
> pci_default_write_config(d, addr, val, len);
> if (addr == 0x85) {
> /* BIT(1): enable or disable superio config io ports */
> - via_superio_io_enable(s->via_sio, val & BIT(1));
> + via_superio_io_enable(&s->via_sio, val & BIT(1));
> }
> }
>
> @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev)
> pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
> }
>
> -static void vt82c686b_realize(PCIDevice *d, Error **errp)
> +static void vt82c686b_init(Object *obj)
> {
> - ViaISAState *s = VIA_ISA(d);
> + ViaISAState *s = VIA_ISA(obj);
>
> - via_isa_realize(d, errp);
> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus,
> - TYPE_VT82C686B_SUPERIO));
> + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT82C686B_SUPERIO);
> }
>
> static void vt82c686b_class_init(ObjectClass *klass, void *data)
> @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass *klass, void *data)
> DeviceClass *dc = DEVICE_CLASS(klass);
> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>
> - k->realize = vt82c686b_realize;
> + k->realize = via_isa_realize;
> k->config_write = vt82c686b_write_config;
> k->vendor_id = PCI_VENDOR_ID_VIA;
> k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA;
> @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = {
> .name = TYPE_VT82C686B_ISA,
> .parent = TYPE_VIA_ISA,
> .instance_size = sizeof(ViaISAState),
> + .instance_init = vt82c686b_init,
> .class_init = vt82c686b_class_init,
> };
>
> @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, uint32_t addr,
> pci_default_write_config(d, addr, val, len);
> if (addr == 0x50) {
> /* BIT(2): enable or disable superio config io ports */
> - via_superio_io_enable(s->via_sio, val & BIT(2));
> + via_superio_io_enable(&s->via_sio, val & BIT(2));
> }
> }
>
> @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev)
> pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */
> }
>
> -static void vt8231_realize(PCIDevice *d, Error **errp)
> +static void vt8231_init(Object *obj)
> {
> - ViaISAState *s = VIA_ISA(d);
> + ViaISAState *s = VIA_ISA(obj);
>
> - via_isa_realize(d, errp);
> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus,
> - TYPE_VT8231_SUPERIO));
> + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT8231_SUPERIO);
> }
>
> static void vt8231_class_init(ObjectClass *klass, void *data)
> @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, void *data)
> DeviceClass *dc = DEVICE_CLASS(klass);
> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>
> - k->realize = vt8231_realize;
> + k->realize = via_isa_realize;
> k->config_write = vt8231_write_config;
> k->vendor_id = PCI_VENDOR_ID_VIA;
> k->device_id = PCI_DEVICE_ID_VIA_8231_ISA;
> @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = {
> .name = TYPE_VT8231_ISA,
> .parent = TYPE_VIA_ISA,
> .instance_size = sizeof(ViaISAState),
> + .instance_init = vt8231_init,
> .class_init = vt8231_class_init,
> };
>
>
next prev parent reply other threads:[~2022-08-23 0:36 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 22:43 [PATCH 0/9] QOM'ify VT82xx devices Bernhard Beschow
2022-08-22 22:43 ` [PATCH 1/9] hw/isa/vt82c686: QOM'ify Super I/O creation Bernhard Beschow
2022-08-23 0:35 ` BALATON Zoltan [this message]
2022-08-23 18:47 ` Bernhard Beschow
2022-08-23 23:36 ` BALATON Zoltan
2022-08-24 22:21 ` Bernhard Beschow
2022-08-22 22:43 ` [PATCH 2/9] hw/isa/vt82c686: Resolve unneeded attribute Bernhard Beschow
2022-08-22 22:43 ` [PATCH 3/9] hw/isa/vt82c686: Prefer pci_address_space() over get_system_memory() Bernhard Beschow
2022-08-22 22:43 ` [PATCH 4/9] hw/isa/vt82c686: QOM'ify via-ide creation Bernhard Beschow
2022-08-24 13:54 ` BALATON Zoltan
2022-08-24 22:19 ` Bernhard Beschow
2022-08-24 23:18 ` BALATON Zoltan
2022-08-29 16:43 ` BB
2022-08-29 17:04 ` BALATON Zoltan
2022-08-29 18:12 ` BB
2022-08-30 19:05 ` BB
2022-08-22 22:43 ` [PATCH 5/9] hw/isa/vt82c686: QOM'ify vt82c686b-usb-uhci creation Bernhard Beschow
2022-08-22 22:43 ` [PATCH 6/9] hw/isa/vt82c686: QOM'ify pm creation Bernhard Beschow
2022-08-22 22:43 ` [PATCH 7/9] hw/isa/vt82c686: QOM'ify ac97 and mc97 creation Bernhard Beschow
2022-08-23 0:44 ` BALATON Zoltan
2022-08-23 18:50 ` Bernhard Beschow
2022-08-23 22:54 ` BALATON Zoltan
2022-08-24 22:43 ` Bernhard Beschow
2022-08-22 22:43 ` [PATCH 8/9] hw/isa/vt82c686: QOM'ify RTC creation Bernhard Beschow
2022-08-23 0:20 ` BALATON Zoltan
2022-08-23 18:38 ` Bernhard Beschow
2022-08-23 23:23 ` BALATON Zoltan
2022-08-29 17:07 ` BB
2022-08-29 17:50 ` BALATON Zoltan
2022-08-29 18:07 ` BB
2022-08-22 22:43 ` [PATCH 9/9] hw/isa/vt82c686: Reuse errp Bernhard Beschow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13a01ca9-ee32-2784-227c-2f6331e224dd@eik.bme.hu \
--to=balaton@eik.bme.hu \
--cc=chenhuacai@kernel.org \
--cc=f4bug@amsat.org \
--cc=jiaxun.yang@flygoat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=shentey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.