All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carsten Otto <carsten.otto@gmail.com>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] Acer BT900 Headset profile
Date: Fri, 22 Apr 2005 18:17:05 +0200	[thread overview]
Message-ID: <13e9886105042209171edb0fba@mail.gmail.com> (raw)

Hello!

I am quite unsure whether my USB adapter supports everything I need,
but with Class 1 and and higher number in the name (BT900) than I saw
elsewhere I don't think that is a problem.
I was able to setup everything, but can't manage to get more than
noise out of my headset. Whenevery I play sounds (or pipe something
into /dev/dsp1) the noise starts and stops just when the sound is
finished.
Please tell me where the problem could be.
Some information:
- The headset is a Logitech Mobile Bluetooth Headset
- headset info:
Requesting information ...
        BD Address:  00:0D:44:02:02:85
        Device Name: Logitech HS01
        LMP Version: 1.1 (0x1) LMP Subversion: 0x3f0
        Manufacturer: Cambridge Silicon Radio (10)
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
                <3-slot packets> <5-slot packets> <encryption> <slot offset=
>=20
                <timing accuracy> <role switch> <hold mode> <sniff mode>=20
                <park state> <RSSI> <channel quality> <SCO link> <HV2 packe=
ts>=20
                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme=
>=20
                <power control> <transparent SCO>=20
- Connections:
        < ACL 00:0D:44:02:02:85 handle 6 state 1 lm MASTER=20
- Playing a sound:
btsco v0.4a
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
speaker volume: 15 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=3D15
Sending up speaker change 15
- amixer:
Simple mixer control 'Master',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Limits: 0 - 15
  Mono: 15 [100%]
Simple mixer control 'Mic',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Limits: 0 - 15
  Mono: 15 [100%]
Simple mixer control 'Loopback',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
- /proc/bus/usb/devices
T:  Bus=3D03 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D  2 Spd=3D12  MxC=
h=3D 0
D:  Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D  1
P:  Vendor=3D0a5c ProdID=3D200a Rev=3D 0.01
S:  Manufacturer=3DBroadcom
S:  Product=3DCCBT2035BDGP23-1
S:  SerialNumber=3D000272C32BDA
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
I:  If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D81(I) Atr=3D03(Int.) MxPS=3D  16 Ivl=3D1ms
E:  Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms
E:  Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms
I:  If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  32 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  32 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  64 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  64 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  64 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  64 Ivl=3D1ms
I:  If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driver=
=3D(none)
E:  Ad=3D84(I) Atr=3D02(Bulk) MxPS=3D  32 Ivl=3D0ms
E:  Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D  32 Ivl=3D0ms


Please write if you need more information.
Thanks for any hint,
--=20
Carsten Otto
carsten.otto@gmail.com
www.c-otto.de


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

             reply	other threads:[~2005-04-22 16:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-22 16:17 Carsten Otto [this message]
2005-04-22 19:18 ` [Bluez-devel] Acer BT900 Headset profile Marcel Holtmann
2005-04-22 20:23   ` Brad Midgley
2005-04-22 21:36     ` Marcel Holtmann
2005-04-22 22:53       ` Brad Midgley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=13e9886105042209171edb0fba@mail.gmail.com \
    --to=carsten.otto@gmail.com \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.