From: ching <ching2048@areca.com.tw>
To: jbottomley@parallels.com, dan.carpenter@oracle.com,
thenzl@redhat.com, agordeev@redhat.com,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1.2 3/16] arcmsr: adding code to support system hibernation
Date: Wed, 14 May 2014 19:10:33 +0800 [thread overview]
Message-ID: <1400065833.6957.26.camel@localhost> (raw)
From: Ching<ching2048@areca.com.tw>
Adding code to support system hibernation.
Signed-off-by: Ching<ching2048@areca.com.tw>
---
diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
--- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-07 18:42:40.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-07 18:26:42.000000000 +0800
@@ -89,11 +89,15 @@ static int arcmsr_bios_param(struct scsi
static int arcmsr_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int arcmsr_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
+static int arcmsr_suspend(struct pci_dev *pdev, pm_message_t state);
+static int arcmsr_resume(struct pci_dev *pdev);
static void arcmsr_remove(struct pci_dev *pdev);
static void arcmsr_shutdown(struct pci_dev *pdev);
static void arcmsr_iop_init(struct AdapterControlBlock *acb);
static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb);
static u32 arcmsr_disable_outbound_ints(struct AdapterControlBlock *acb);
+static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb,
+ u32 intmask_org);
static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb);
static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb);
static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb);
@@ -167,6 +171,8 @@ static struct pci_driver arcmsr_pci_driv
.id_table = arcmsr_device_id_table,
.probe = arcmsr_probe,
.remove = arcmsr_remove,
+ .suspend = arcmsr_suspend,
+ .resume = arcmsr_resume,
.shutdown = arcmsr_shutdown,
};
/*
@@ -776,6 +782,77 @@ static void arcmsr_free_irq(struct pci_d
free_irq(pdev->irq, acb);
}
+static int arcmsr_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ uint32_t intmask_org;
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)host->hostdata;
+
+ intmask_org = arcmsr_disable_outbound_ints(acb);
+ arcmsr_free_irq(pdev, acb);
+ del_timer_sync(&acb->eternal_timer);
+ flush_scheduled_work();
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+ arcmsr_enable_outbound_ints(acb, intmask_org);
+ pci_set_drvdata(pdev, host);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int arcmsr_resume(struct pci_dev *pdev)
+{
+ int error;
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)host->hostdata;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ if (pci_enable_device(pdev)) {
+ pr_warn("%s: pci_enable_device error\n", __func__);
+ return -ENODEV;
+ }
+ error = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (error) {
+ error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (error) {
+ pr_warn("scsi%d: No suitable DMA mask available\n",
+ host->host_no);
+ goto controller_unregister;
+ }
+ }
+ pci_set_master(pdev);
+ if (arcmsr_request_irq(pdev, acb) == ARC_FAILURE)
+ goto controller_stop;
+ arcmsr_iop_init(acb);
+ INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
+ atomic_set(&acb->rq_map_token, 16);
+ atomic_set(&acb->ante_token_value, 16);
+ acb->fw_flag = FW_NORMAL;
+ init_timer(&acb->eternal_timer);
+ acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6 * HZ);
+ acb->eternal_timer.data = (unsigned long) acb;
+ acb->eternal_timer.function = &arcmsr_request_device_map;
+ add_timer(&acb->eternal_timer);
+ return 0;
+controller_stop:
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+controller_unregister:
+ scsi_remove_host(host);
+ arcmsr_free_ccb_pool(acb);
+ arcmsr_unmap_pciregion(acb);
+ pci_release_regions(pdev);
+ scsi_host_put(host);
+ pci_disable_device(pdev);
+ return -ENODEV;
+}
+
static uint8_t arcmsr_abort_hba_allcmd(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
reply other threads:[~2014-05-14 11:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400065833.6957.26.camel@localhost \
--to=ching2048@areca.com.tw \
--cc=agordeev@redhat.com \
--cc=dan.carpenter@oracle.com \
--cc=jbottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=thenzl@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.