From: Eli Billauer <eli.billauer@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, tj@kernel.org,
linux-kernel@vger.kernel.org,
Eli Billauer <eli.billauer@gmail.com>
Subject: [PATCH 4/5] staging: xillybus: Use devm_ API on probe and remove
Date: Fri, 16 May 2014 11:26:38 +0300 [thread overview]
Message-ID: <1400228799-8832-5-git-send-email-eli.billauer@gmail.com> (raw)
In-Reply-To: <1400228799-8832-1-git-send-email-eli.billauer@gmail.com>
Suggested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
---
drivers/staging/xillybus/xillybus.h | 1 -
drivers/staging/xillybus/xillybus_core.c | 2 +-
drivers/staging/xillybus/xillybus_of.c | 47 ++++-----------------
drivers/staging/xillybus/xillybus_pcie.c | 65 ++++++++----------------------
4 files changed, 27 insertions(+), 88 deletions(-)
diff --git a/drivers/staging/xillybus/xillybus.h b/drivers/staging/xillybus/xillybus.h
index e5e91d6..78a749a 100644
--- a/drivers/staging/xillybus/xillybus.h
+++ b/drivers/staging/xillybus/xillybus.h
@@ -116,7 +116,6 @@ struct xilly_endpoint {
*/
struct pci_dev *pdev;
struct device *dev;
- struct resource res; /* OF devices only */
struct xilly_endpoint_hardware *ephw;
struct list_head ep_list;
diff --git a/drivers/staging/xillybus/xillybus_core.c b/drivers/staging/xillybus/xillybus_core.c
index b0a6696..fe8f9d2 100644
--- a/drivers/staging/xillybus/xillybus_core.c
+++ b/drivers/staging/xillybus/xillybus_core.c
@@ -2094,7 +2094,7 @@ struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev,
{
struct xilly_endpoint *endpoint;
- endpoint = kzalloc(sizeof(*endpoint), GFP_KERNEL);
+ endpoint = devm_kzalloc(dev, sizeof(*endpoint), GFP_KERNEL);
if (!endpoint) {
dev_err(dev, "Failed to allocate memory. Aborting.\n");
return NULL;
diff --git a/drivers/staging/xillybus/xillybus_of.c b/drivers/staging/xillybus/xillybus_of.c
index 23a609b..46ea010 100644
--- a/drivers/staging/xillybus/xillybus_of.c
+++ b/drivers/staging/xillybus/xillybus_of.c
@@ -19,6 +19,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/err.h>
#include "xillybus.h"
MODULE_DESCRIPTION("Xillybus driver for Open Firmware");
@@ -123,6 +124,7 @@ static int xilly_drv_probe(struct platform_device *op)
struct xilly_endpoint *endpoint;
int rc = 0;
int irq;
+ struct resource res;
struct xilly_endpoint_hardware *ephw = &of_hw;
if (of_property_read_bool(dev->of_node, "dma-coherent"))
@@ -135,38 +137,26 @@ static int xilly_drv_probe(struct platform_device *op)
dev_set_drvdata(dev, endpoint);
- rc = of_address_to_resource(dev->of_node, 0, &endpoint->res);
+ rc = of_address_to_resource(dev->of_node, 0, &res);
if (rc) {
dev_warn(endpoint->dev,
"Failed to obtain device tree resource\n");
- goto failed_request_regions;
+ return rc;
}
- if (!request_mem_region(endpoint->res.start,
- resource_size(&endpoint->res), xillyname)) {
- dev_err(endpoint->dev,
- "request_mem_region failed. Aborting.\n");
- rc = -EBUSY;
- goto failed_request_regions;
- }
+ endpoint->registers = devm_ioremap_resource(dev, &res);
- endpoint->registers = of_iomap(dev->of_node, 0);
- if (!endpoint->registers) {
- dev_err(endpoint->dev,
- "Failed to map I/O memory. Aborting.\n");
- rc = -EIO;
- goto failed_iomap0;
- }
+ if (IS_ERR(endpoint->registers))
+ return PTR_ERR(endpoint->registers);
irq = irq_of_parse_and_map(dev->of_node, 0);
- rc = request_irq(irq, xillybus_isr, 0, xillyname, endpoint);
+ rc = devm_request_irq(dev, irq, xillybus_isr, 0, xillyname, endpoint);
if (rc) {
dev_err(endpoint->dev,
"Failed to register IRQ handler. Aborting.\n");
- rc = -ENODEV;
- goto failed_register_irq;
+ return -ENODEV;
}
rc = xillybus_endpoint_discovery(endpoint);
@@ -174,18 +164,8 @@ static int xilly_drv_probe(struct platform_device *op)
if (!rc)
return 0;
- free_irq(irq, endpoint);
-
-failed_register_irq:
- iounmap(endpoint->registers);
-failed_iomap0:
- release_mem_region(endpoint->res.start,
- resource_size(&endpoint->res));
-
-failed_request_regions:
xillybus_do_cleanup(&endpoint->cleanup, endpoint);
- kfree(endpoint);
return rc;
}
@@ -193,20 +173,11 @@ static int xilly_drv_remove(struct platform_device *op)
{
struct device *dev = &op->dev;
struct xilly_endpoint *endpoint = dev_get_drvdata(dev);
- int irq = irq_of_parse_and_map(dev->of_node, 0);
xillybus_endpoint_remove(endpoint);
- free_irq(irq, endpoint);
-
- iounmap(endpoint->registers);
- release_mem_region(endpoint->res.start,
- resource_size(&endpoint->res));
-
xillybus_do_cleanup(&endpoint->cleanup, endpoint);
- kfree(endpoint);
-
return 0;
}
diff --git a/drivers/staging/xillybus/xillybus_pcie.c b/drivers/staging/xillybus/xillybus_pcie.c
index 51426d8..a4fe51c 100644
--- a/drivers/staging/xillybus/xillybus_pcie.c
+++ b/drivers/staging/xillybus/xillybus_pcie.c
@@ -141,38 +141,32 @@ static int xilly_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, endpoint);
- rc = pci_enable_device(pdev);
-
- /* L0s has caused packet drops. No power saving, thank you. */
-
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+ rc = pcim_enable_device(pdev);
if (rc) {
dev_err(endpoint->dev,
- "pci_enable_device() failed. Aborting.\n");
- goto no_enable;
+ "pcim_enable_device() failed. Aborting.\n");
+ return rc;
}
+ /* L0s has caused packet drops. No power saving, thank you. */
+
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(endpoint->dev,
"Incorrect BAR configuration. Aborting.\n");
- rc = -ENODEV;
- goto bad_bar;
+ return -ENODEV;
}
- rc = pci_request_regions(pdev, xillyname);
+ rc = pcim_iomap_regions(pdev, 0x01, xillyname);
if (rc) {
dev_err(endpoint->dev,
- "pci_request_regions() failed. Aborting.\n");
- goto failed_request_regions;
+ "pcim_iomap_regions() failed. Aborting.\n");
+ return rc;
}
- endpoint->registers = pci_iomap(pdev, 0, 128);
- if (!endpoint->registers) {
- dev_err(endpoint->dev, "Failed to map BAR 0. Aborting.\n");
- rc = -EIO;
- goto failed_iomap0;
- }
+ endpoint->registers = pcim_iomap_table(pdev)[0];
pci_set_master(pdev);
@@ -180,16 +174,15 @@ static int xilly_probe(struct pci_dev *pdev,
if (pci_enable_msi(pdev)) {
dev_err(endpoint->dev,
"Failed to enable MSI interrupts. Aborting.\n");
- rc = -ENODEV;
- goto failed_enable_msi;
+ return -ENODEV;
}
- rc = request_irq(pdev->irq, xillybus_isr, 0, xillyname, endpoint);
+ rc = devm_request_irq(&pdev->dev, pdev->irq, xillybus_isr, 0,
+ xillyname, endpoint);
if (rc) {
dev_err(endpoint->dev,
"Failed to register MSI handler. Aborting.\n");
- rc = -ENODEV;
- goto failed_register_msi;
+ return -ENODEV;
}
/*
@@ -203,8 +196,7 @@ static int xilly_probe(struct pci_dev *pdev,
endpoint->dma_using_dac = 0;
else {
dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n");
- rc = -ENODEV;
- goto failed_dmamask;
+ return -ENODEV;
}
rc = xillybus_endpoint_discovery(endpoint);
@@ -212,22 +204,8 @@ static int xilly_probe(struct pci_dev *pdev,
if (!rc)
return 0;
-failed_dmamask:
- free_irq(pdev->irq, endpoint);
-failed_register_msi:
- pci_disable_msi(pdev);
-failed_enable_msi:
- /* pci_clear_master(pdev); Nobody else seems to do this */
- pci_iounmap(pdev, endpoint->registers);
-failed_iomap0:
- pci_release_regions(pdev);
-failed_request_regions:
-bad_bar:
- pci_disable_device(pdev);
-no_enable:
xillybus_do_cleanup(&endpoint->cleanup, endpoint);
- kfree(endpoint);
return rc;
}
@@ -237,16 +215,7 @@ static void xilly_remove(struct pci_dev *pdev)
xillybus_endpoint_remove(endpoint);
- free_irq(pdev->irq, endpoint);
-
- pci_disable_msi(pdev);
- pci_iounmap(pdev, endpoint->registers);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-
xillybus_do_cleanup(&endpoint->cleanup, endpoint);
-
- kfree(endpoint);
}
MODULE_DEVICE_TABLE(pci, xillyids);
--
1.7.2.3
next prev parent reply other threads:[~2014-05-16 8:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 8:26 [PATCH 0/5] devres: Add functions + migrate Xillybus driver Eli Billauer
2014-05-16 8:26 ` [PATCH 1/5] devres: Add devm_get_free_pages API Eli Billauer
2014-05-16 21:01 ` Tejun Heo
2014-05-16 8:26 ` [PATCH 2/5] dma-mapping: Add devm_ interface for dma_map_single() Eli Billauer
2014-05-16 21:08 ` Tejun Heo
2014-05-17 12:19 ` Eli Billauer
2014-05-19 20:17 ` Tejun Heo
2014-05-20 5:54 ` Eli Billauer
2014-05-20 15:05 ` Tejun Heo
2014-05-16 8:26 ` [PATCH 3/5] dma-mapping: pci: Add devm_ interface for pci_map_single Eli Billauer
2014-05-16 21:09 ` Tejun Heo
2014-05-16 8:26 ` Eli Billauer [this message]
2014-05-16 8:26 ` [PATCH 5/5] staging: xillybus: Use devm_ API for memory allocation and DMA mapping Eli Billauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400228799-8832-5-git-send-email-eli.billauer@gmail.com \
--to=eli.billauer@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.