From: Richard Purdie <richard.purdie@linuxfoundation.org>
To: openembedded-core <openembedded-core@lists.openembedded.org>
Subject: [PATCH] libxslt: Use pkg-config for dependencies
Date: Thu, 22 May 2014 10:51:20 +0100 [thread overview]
Message-ID: <1400752280.17834.60.camel@ted> (raw)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
diff --git a/meta/recipes-support/libxslt/libxslt/pkgconfig.patch b/meta/recipes-support/libxslt/libxslt/pkgconfig.patch
new file mode 100644
index 0000000..89d14c9
--- /dev/null
+++ b/meta/recipes-support/libxslt/libxslt/pkgconfig.patch
@@ -0,0 +1,118 @@
+Use pkg-config to find gcrypt and libxml2.
+
+Upstream-Status: Pending [libxml2 is upstreamable]
+
+RP 2014/5/22
+
+Index: libxslt-1.1.28/configure.in
+===================================================================
+--- libxslt-1.1.28.orig/configure.in 2014-05-13 16:46:02.278474967 +0000
++++ libxslt-1.1.28/configure.in 2014-05-13 16:53:56.510472561 +0000
+@@ -376,6 +376,8 @@
+ AC_SUBST(PYTHON_SUBDIR)
+ AC_SUBST(PYTHON_LIBS)
+
++PKG_PROG_PKG_CONFIG
++
+ AC_ARG_WITH(crypto, [ --with-crypto Add crypto support to exslt (on)])
+ WITH_CRYPTO=0
+ if test "$with_crypto" = "no" ; then
+@@ -391,26 +393,13 @@
+ WITH_CRYPTO=1
+ ;;
+ *)
+- AC_PATH_PROG(LIBGCRYPT_CONFIG, libgcrypt-config, no)
+- if test "$LIBGCRYPT_CONFIG" != "no" ; then
+- LIBGCRYPT_VERSION=`$LIBGCRYPT_CONFIG --version`
+- if test VERSION_TO_NUMBER(echo $LIBGCRYPT_VERSION) -lt VERSION_TO_NUMBER(echo "1.1.42")
+- then
+- LIBGCRYPT_CFLAGS=""
+- LIBGCRYPT_LIBS=""
+- echo 'gcrypt library version < 1.1.42 - Crypto extensions will not be available.'
+- else
+- LIBGCRYPT_CFLAGS=`$LIBGCRYPT_CONFIG $libgcrypt_config_args --cflags`
+- LIBGCRYPT_LIBS=`$LIBGCRYPT_CONFIG $libgcrypt_config_args --libs`
+- AC_DEFINE(HAVE_GCRYPT, 1, [Define if gcrypt library is available.])
+- echo 'Crypto extensions will be available.'
++ PKG_CHECK_MODULES(LIBGCRYPT, [libgcrypt >= 1.1.42], [
++ AC_DEFINE(HAVE_GCRYPT, 1, [Define if gcrypt library is available.])
++ echo 'Crypto extensions will be available.'
+ WITH_CRYPTO=1
+- fi
+- else
+- LIBGCRYPT_CFLAGS=""
+- LIBGCRYPT_LIBS=""
+- echo 'Crypto extensions will not be available. Install libgcrypt and reconfigure to make available.'
+- fi
++ ], [
++ echo 'Crypto extensions will not be available. Install libgcrypt >= 1.1.42 and reconfigure to make available.'
++ ])
+ esac
+ fi
+ AC_SUBST(WITH_CRYPTO)
+@@ -471,24 +460,8 @@
+ dnl some tweaking - David Härdeman 30/10/2001
+ dnl
+
+-LIBXML_CONFIG_PREFIX=""
+ LIBXML_SRC=""
+
+-AC_ARG_WITH(libxml-prefix,
+- [ --with-libxml-prefix=[PFX] Specify location of libxml config],
+- LIBXML_CONFIG_PREFIX=$withval
+-)
+-
+-AC_ARG_WITH(libxml-include-prefix,
+- [ --with-libxml-include-prefix=[PFX] Specify location of libxml headers],
+- LIBXML_CFLAGS="-I$withval"
+-)
+-
+-AC_ARG_WITH(libxml-libs-prefix,
+- [ --with-libxml-libs-prefix=[PFX] Specify location of libxml libs],
+- LIBXML_LIBS="-L$withval"
+-)
+-
+ AC_ARG_WITH(libxml-src,
+ [ --with-libxml-src=[DIR] For libxml thats not installed yet (sets all three above)],
+ LIBXML_SRC="$withval"
+@@ -551,28 +524,9 @@
+ fi
+ fi
+
+-dnl
+-dnl make sure xml2-config is executable,
+-dnl test version and init our variables
+-dnl
+-
+-if ${XML_CONFIG} --libs print > /dev/null 2>&1
+-then
+- XMLVERS=`$XML_CONFIG --version`
+- if test VERSION_TO_NUMBER(echo $XMLVERS) -ge VERSION_TO_NUMBER(echo $LIBXML_REQUIRED_VERSION)
+- then
+- AC_MSG_RESULT($XMLVERS found)
+- else
+- AC_MSG_ERROR(Version $XMLVERS found. You need at least libxml2 $LIBXML_REQUIRED_VERSION for this version of libxslt)
+- fi
+- LIBXML_LIBS="$LIBXML_LIBS `$XML_CONFIG --libs`"
+- if test "x$LIBXML_SRC" = "x"; then
+- LIBXML_CFLAGS="$LIBXML_CFLAGS `$XML_CONFIG --cflags`"
+- fi
+-else
+- AC_MSG_ERROR([Could not find libxml2 anywhere, check ftp://xmlsoft.org/.])
+-fi
+-
++PKG_CHECK_MODULES(LIBXML, [libxml-2.0 >= $LIBXML_REQUIRED_VERSION],,
++ [AC_MSG_ERROR([Could not find libxml-2.0 >= $LIBXML_REQUIRED_VERSION anywhere, check ftp://xmlsoft.org/.])]
++)
+
+ AC_SUBST(CFLAGS)
+ AC_SUBST(CPPFLAGS)
+@@ -597,7 +551,7 @@
+
+ if test "$with_plugins" = "yes" ; then
+ AC_MSG_CHECKING([libxml2 module support])
+- WITH_MODULES="`$XML_CONFIG --modules`"
++ WITH_MODULES="`$PKG_CONFIG --variable=modules libxml-2.0`"
+ if test "${WITH_MODULES}" = "1"; then
+ AC_MSG_RESULT(yes)
+ else
diff --git a/meta/recipes-support/libxslt/libxslt_1.1.28.bb b/meta/recipes-support/libxslt/libxslt_1.1.28.bb
index 24401bb..5401f3c 100644
--- a/meta/recipes-support/libxslt/libxslt_1.1.28.bb
+++ b/meta/recipes-support/libxslt/libxslt_1.1.28.bb
@@ -9,7 +9,8 @@ SECTION = "libs"
DEPENDS = "libxml2"
SRC_URI = "ftp://xmlsoft.org/libxslt//libxslt-${PV}.tar.gz \
- file://pkgconfig_fix.patch"
+ file://pkgconfig_fix.patch \
+ file://pkgconfig.patch"
SRC_URI[md5sum] = "9667bf6f9310b957254fdcf6596600b7"
SRC_URI[sha256sum] = "5fc7151a57b89c03d7b825df5a0fae0a8d5f05674c0e7cf2937ecec4d54a028c"
reply other threads:[~2014-05-22 9:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400752280.17834.60.camel@ted \
--to=richard.purdie@linuxfoundation.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.