From mboxrd@z Thu Jan 1 00:00:00 1970 From: mazen.e Date: Sun, 25 May 2014 23:34:07 -0700 (PDT) Subject: [U-Boot] Standalone application issue. In-Reply-To: <20140525210127.070AF3823D1@gemini.denx.de> References: <1400831110428-180515.post@n7.nabble.com> <20140523121025.61E2538224A@gemini.denx.de> <1400920322709-180612.post@n7.nabble.com> <20140524160417.C2E713801BC@gemini.denx.de> <1401002648328-180660.post@n7.nabble.com> <20140525082257.232823814BE@gemini.denx.de> <1401009344794-180667.post@n7.nabble.com> <20140525210127.070AF3823D1@gemini.denx.de> Message-ID: <1401086047300-180701.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang, Thank you very much. As per your request, I executed the following mkimage command: mkimage -A arm -O u-boot -T standalone -C none -a 0x0c100000 -e 0x0c100000 -n "Hello World" -d hello_world.bin Hello.img Than, I transferred to the board using uboot loadb (followed by the kermit send command) and then launched the bootm ARNDALE5250 # bootm 0x43E00000 ## Booting kernel from Legacy Image at 43e00000 ... Image Name: Hello World Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 Bytes Load Address: 0c100000 Entry Point: 0c100000 Verifying Checksum ... OK Loading Standalone Program ... OK OK Still, the program hangs at the above giving no sign of life. Please note I am using the arndale 5250 board, am I missing something? Can I try to write the hello world standalone into the microSD? what are dd parameters shall I use (e.g. seek)? Many thanks and best regards. -- View this message in context: http://u-boot.10912.n7.nabble.com/Standalone-application-issue-tp180515p180701.html Sent from the U-Boot mailing list archive at Nabble.com.