Re: [PATCH 2/2] powerpc/powernv: Enable POWER8 doorbell IPIs

[Michael Ellerman <mpe@ellerman.id.au>]

On Mon, 2014-06-02 at 16:57 +1000, Michael Neuling wrote:
> This patch enables POWER8 doorbell IPIs on powernv.
> 
> Since doorbells can only IPI within a core, we test to see when we can use
> doorbells and if not we fall back to XICS.  This also enables hypervisor
> doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit.
> 
> Based on tests by Anton, the best case IPI latency between two threads dropped
> from 894ns to 512ns.
> 
> Signed-off-by: Michael Neuling <mikey@neuling.org>
> ---
>  arch/powerpc/kernel/cpu_setup_power.S | 2 ++
>  arch/powerpc/platforms/powernv/smp.c  | 6 ++++++
>  arch/powerpc/sysdev/xics/icp-native.c | 9 ++++++++-
>  3 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index 1557e7c..4673353 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -56,6 +56,7 @@ _GLOBAL(__setup_cpu_power8)
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
>  	mfspr	r3,SPRN_LPCR
> +	ori	r3, r3, LPCR_PECEDH
>  	bl	__init_LPCR
>  	bl	__init_HFSCR
>  	bl	__init_tlb_power8
> @@ -74,6 +75,7 @@ _GLOBAL(__restore_cpu_power8)
>  	li	r0,0
>  	mtspr	SPRN_LPID,r0
>  	mfspr   r3,SPRN_LPCR
> +	ori	r3, r3, LPCR_PECEDH
>  	bl	__init_LPCR
>  	bl	__init_HFSCR
>  	bl	__init_tlb_power8
> diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
> index 0062a43..5fcfcf4 100644
> --- a/arch/powerpc/platforms/powernv/smp.c
> +++ b/arch/powerpc/platforms/powernv/smp.c
> @@ -32,6 +32,7 @@
>  #include <asm/opal.h>
>  #include <asm/runlatch.h>
>  #include <asm/code-patching.h>
> +#include <asm/dbell.h>
>  
>  #include "powernv.h"
>  
> @@ -46,6 +47,11 @@ static void pnv_smp_setup_cpu(int cpu)
>  {
>  	if (cpu != boot_cpuid)
>  		xics_setup_cpu();
> +
> +#ifdef CONFIG_PPC_DOORBELL
> +	if (cpu_has_feature(CPU_FTR_DBELL))
> +		doorbell_setup_this_cpu();
> +#endif
>  }

Where does CONFIG_PPC_DOORBELL get set?

It looks like the only place you can be getting it is from CONFIG_PPC_PSERIES.
If you build a POWERNV only kernel it will get disabled, which I don't think is
what we want.

I think we should select it for POWERNV as well as PSERIES. That would mean
it's always enabled for any build of the files you touch, so you shouldn't need
the #ifdefs.

cheers