From: Sergey <sergemp@mail.ru>
To: alsa-devel <alsa-devel@alsa-project.org>
Subject: alsa-lib: pcm_plug: fix float conversion for user specified ttable
Date: Mon, 16 Jun 2014 19:52:51 +0400 [thread overview]
Message-ID: <1402933971.835286264@f359.i.mail.ru> (raw)
Move custom ttable with equal channels case from a separate ttable_last
exception into a common plugins insertion loop.
Fixes plug with ttable for float pcms (jack, ladspa).
Example: aplay -fFLOAT_LE /dev/zero
pcm.!default {
type plug
slave.pcm { type null }
ttable.0.0 1
}
---
src/pcm/pcm_plug.c | 36 +++++++++++-------------------------
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a/src/pcm/pcm_plug.c b/src/pcm/pcm_plug.c
index ede9c15..6d0454f 100644
--- a/src/pcm/pcm_plug.c
+++ b/src/pcm/pcm_plug.c
@@ -53,7 +53,7 @@ typedef struct {
const snd_config_t *rate_converter;
enum snd_pcm_plug_route_policy route_policy;
snd_pcm_route_ttable_entry_t *ttable;
- int ttable_ok, ttable_last;
+ int ttable_ok;
unsigned int tt_ssize, tt_cused, tt_sused;
} snd_pcm_plug_t;
@@ -380,7 +380,7 @@ static int snd_pcm_plug_change_channels(snd_pcm_t *pcm, snd_pcm_t **new, snd_pcm
snd_pcm_route_ttable_entry_t *ttable;
int err;
if (clt->channels == slv->channels &&
- (!plug->ttable || !plug->ttable_last))
+ (!plug->ttable || plug->ttable_ok))
return 0;
if (clt->rate != slv->rate &&
clt->channels > slv->channels)
@@ -485,13 +485,15 @@ static int snd_pcm_plug_change_format(snd_pcm_t *pcm, snd_pcm_t **new, snd_pcm_p
/* No conversion is needed */
if (clt->format == slv->format &&
clt->rate == slv->rate &&
- clt->channels == slv->channels)
+ clt->channels == slv->channels &&
+ (!plug->ttable || plug->ttable_ok))
return 0;
if (snd_pcm_format_linear(slv->format)) {
/* Conversion is done in another plugin */
if (clt->rate != slv->rate ||
- clt->channels != slv->channels)
+ clt->channels != slv->channels ||
+ (plug->ttable && !plug->ttable_ok))
return 0;
cfmt = clt->format;
switch (clt->format) {
@@ -525,7 +527,8 @@ static int snd_pcm_plug_change_format(snd_pcm_t *pcm, snd_pcm_t **new, snd_pcm_p
if (snd_pcm_format_linear(clt->format)) {
cfmt = clt->format;
f = snd_pcm_lfloat_open;
- } else if (clt->rate != slv->rate || clt->channels != slv->channels) {
+ } else if (clt->rate != slv->rate || clt->channels != slv->channels ||
+ (plug->ttable && !plug->ttable_ok)) {
cfmt = SND_PCM_FORMAT_S16;
f = snd_pcm_lfloat_open;
} else
@@ -641,11 +644,12 @@ static int snd_pcm_plug_insert_plugins(snd_pcm_t *pcm,
};
snd_pcm_plug_params_t p = *slave;
unsigned int k = 0;
- plug->ttable_ok = plug->ttable_last = 0;
+ plug->ttable_ok = 0;
while (client->format != p.format ||
client->channels != p.channels ||
client->rate != p.rate ||
- client->access != p.access) {
+ client->access != p.access ||
+ (plug->ttable && !plug->ttable_ok)) {
snd_pcm_t *new;
int err;
if (k >= sizeof(funcs)/sizeof(*funcs))
@@ -660,24 +664,6 @@ static int snd_pcm_plug_insert_plugins(snd_pcm_t *pcm,
}
k++;
}
-#ifdef BUILD_PCM_PLUGIN_ROUTE
- /* it's exception, user specified ttable, but no reduction/expand */
- if (plug->ttable && !plug->ttable_ok) {
- snd_pcm_t *new;
- int err;
- plug->ttable_last = 1;
- err = snd_pcm_plug_change_channels(pcm, &new, client, &p);
- if (err < 0) {
- snd_pcm_plug_clear(pcm);
- return err;
- }
- assert(err);
- assert(plug->ttable_ok);
- plug->gen.slave = new;
- pcm->fast_ops = new->fast_ops;
- pcm->fast_op_arg = new->fast_op_arg;
- }
-#endif
return 0;
}
--
1.7.10.4
next reply other threads:[~2014-06-16 15:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 15:52 Sergey [this message]
2014-06-17 2:23 ` alsa-lib: pcm_plug: fix float conversion for user specified ttable Raymond Yau
2014-06-17 16:19 ` Sergey
2014-06-17 13:06 ` Jaroslav Kysela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402933971.835286264@f359.i.mail.ru \
--to=sergemp@mail.ru \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.