All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] gpio: add jz4740-gpio driver for Ingenic MIPS SoCs
Date: Fri, 27 Jun 2014 02:49:30 +0400	[thread overview]
Message-ID: <1403822973-3151-2-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1403822973-3151-1-git-send-email-antonynpavlov@gmail.com>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 drivers/gpio/Kconfig       |   6 ++
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-jz4740.c | 140 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 45b8c53..f98a9c0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -37,6 +37,12 @@ config GPIO_GENERIC_PLATFORM
 config GPIO_IMX
 	def_bool ARCH_IMX
 
+config GPIO_JZ4740
+	bool "GPIO support for Ingenic SoCs"
+	depends on MACH_MIPS_XBURST
+	help
+	  Say yes here to enable the GPIO driver for the Ingenic SoCs.
+
 config GPIO_MALTA_FPGA_I2C
 	bool "Malta CBUS FPGA I2C GPIO"
 	depends on MACH_MIPS_MALTA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index add6ffc..22d2ac0 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
 obj-$(CONFIG_GPIO_IMX)		+= gpio-imx.o
+obj-$(CONFIG_GPIO_JZ4740)	+= gpio-jz4740.o
 obj-$(CONFIG_GPIO_MALTA_FPGA_I2C) += gpio-malta-fpga-i2c.o
 obj-$(CONFIG_GPIO_ORION)	+= gpio-orion.o
 obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
diff --git a/drivers/gpio/gpio-jz4740.c b/drivers/gpio/gpio-jz4740.c
new file mode 100644
index 0000000..3c8efad
--- /dev/null
+++ b/drivers/gpio/gpio-jz4740.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2013, 2014 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * Based on Linux JZ4740 platform GPIO support:
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <gpio.h>
+#include <malloc.h>
+
+#define JZ_REG_GPIO_PIN			0x00
+#define JZ_REG_GPIO_DATA		0x10
+#define JZ_REG_GPIO_DATA_SET		0x14
+#define JZ_REG_GPIO_DATA_CLEAR		0x18
+#define JZ_REG_GPIO_DIRECTION		0x60
+#define JZ_REG_GPIO_DIRECTION_SET	0x64
+#define JZ_REG_GPIO_DIRECTION_CLEAR	0x68
+
+#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f)
+#define CHIP_TO_REG(chip, reg) (gpio_chip_to_jz4740_gpio_chip(chip)->base + (reg))
+
+struct jz4740_gpio_chip {
+	void __iomem *base;
+	struct gpio_chip chip;
+};
+
+static inline struct jz4740_gpio_chip *gpio_chip_to_jz4740_gpio_chip(struct gpio_chip *chip)
+{
+	return container_of(chip, struct jz4740_gpio_chip, chip);
+}
+
+static int jz4740_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio));
+}
+
+static void jz4740_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET);
+	reg += !value;
+	writel(BIT(gpio), reg);
+}
+
+static int jz4740_gpio_get_direction(struct gpio_chip *chip, unsigned gpio)
+{
+	if (readl(CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION)) & BIT(gpio))
+		return GPIOF_DIR_OUT;
+
+	return GPIOF_DIR_IN;
+}
+
+static int jz4740_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR));
+
+	return 0;
+}
+
+static int jz4740_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+	int value)
+{
+	jz4740_gpio_set_value(chip, gpio, value);
+	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET));
+
+	return 0;
+}
+
+static struct gpio_ops jz4740_gpio_ops = {
+	.direction_input = jz4740_gpio_direction_input,
+	.direction_output = jz4740_gpio_direction_output,
+	.get_direction = jz4740_gpio_get_direction,
+	.get = jz4740_gpio_get_value,
+	.set = jz4740_gpio_set_value,
+};
+
+static int jz4740_gpio_probe(struct device_d *dev)
+{
+	void __iomem *base;
+	struct jz4740_gpio_chip *jz4740_gpio;
+	int ret;
+
+	base = dev_request_mem_region(dev, 0);
+	if (!base) {
+		dev_err(dev, "could not get memory region\n");
+		return -ENODEV;
+	}
+
+	jz4740_gpio = xzalloc(sizeof(*jz4740_gpio));
+	jz4740_gpio->base = base;
+	jz4740_gpio->chip.ops = &jz4740_gpio_ops;
+	jz4740_gpio->chip.base = -1; /* dev->id * 32; */
+	jz4740_gpio->chip.ngpio = 32;
+	jz4740_gpio->chip.dev = dev;
+
+	ret = gpiochip_add(&jz4740_gpio->chip);
+	if (ret) {
+		dev_err(dev, "couldn't add gpiochip\n");
+		free(jz4740_gpio);
+		return ret;
+	}
+
+	dev_dbg(dev, "probed gpiochip%d with base %d\n",
+				dev->id, jz4740_gpio->chip.base);
+
+	return 0;
+}
+
+static __maybe_unused struct of_device_id jz4740_gpio_dt_ids[] = {
+	{
+		.compatible = "ingenic,jz4740-gpio",
+	}, {
+		/* sentinel */
+	},
+};
+
+static struct driver_d jz4740_gpio_driver = {
+	.name = "jz4740-gpio",
+	.probe = jz4740_gpio_probe,
+	.of_compatible	= DRV_OF_COMPAT(jz4740_gpio_dt_ids),
+};
+
+static int jz4740_gpio_init(void)
+{
+	return platform_driver_register(&jz4740_gpio_driver);
+}
+coredevice_initcall(jz4740_gpio_init);
-- 
1.9.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-06-26 22:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-26 22:49 [PATCH 0/4] MIPS: XBurst: add gpio support Antony Pavlov
2014-06-26 22:49 ` Antony Pavlov [this message]
2014-06-26 22:49 ` [PATCH 2/4] MIPS: XBurst: use gpiolib Antony Pavlov
2014-06-26 22:49 ` [PATCH 3/4] MIPS: dts: jz4755.dtsi: add gpio Antony Pavlov
2014-06-26 22:49 ` [PATCH 4/4] MIPS: ritmix-rzx50_defconfig: enable gpio stuff Antony Pavlov
2014-06-27 19:40 ` [PATCH 0/4] MIPS: XBurst: add gpio support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403822973-3151-2-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.