All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH] hwmon: (adm1021) Avoid forward declaration
Date: Thu, 03 Jul 2014 13:45:33 +0000	[thread overview]
Message-ID: <1404395133.4895.1.camel@phoenix> (raw)

Reorder functions to avoid forward declaration.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/hwmon/adm1021.c | 175 +++++++++++++++++++++++-------------------------
 1 file changed, 83 insertions(+), 92 deletions(-)

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 3eb4281..7f7635b 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -98,41 +98,63 @@ struct adm1021_data {
 	u8 remote_temp_offset_prec;
 };
 
-static int adm1021_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
-static int adm1021_detect(struct i2c_client *client,
-			  struct i2c_board_info *info);
-static void adm1021_init_client(struct i2c_client *client);
-static struct adm1021_data *adm1021_update_device(struct device *dev);
-
 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
 static bool read_only;
 
+static struct adm1021_data *adm1021_update_device(struct device *dev)
+{
+	struct adm1021_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 
-static const struct i2c_device_id adm1021_id[] = {
-	{ "adm1021", adm1021 },
-	{ "adm1023", adm1023 },
-	{ "max1617", max1617 },
-	{ "max1617a", max1617a },
-	{ "thmc10", thmc10 },
-	{ "lm84", lm84 },
-	{ "gl523sm", gl523sm },
-	{ "mc1066", mc1066 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, adm1021_id);
+	mutex_lock(&data->update_lock);
 
-/* This is the driver that will be inserted */
-static struct i2c_driver adm1021_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "adm1021",
-	},
-	.probe		= adm1021_probe,
-	.id_table	= adm1021_id,
-	.detect		= adm1021_detect,
-	.address_list	= normal_i2c,
-};
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		int i;
+
+		dev_dbg(dev, "Starting adm1021 update\n");
+
+		for (i = 0; i < 2; i++) {
+			data->temp[i] = 1000 *
+				(s8) i2c_smbus_read_byte_data(
+					client, ADM1021_REG_TEMP(i));
+			data->temp_max[i] = 1000 *
+				(s8) i2c_smbus_read_byte_data(
+					client, ADM1021_REG_TOS_R(i));
+			if (data->type != lm84) {
+				data->temp_min[i] = 1000 *
+				  (s8) i2c_smbus_read_byte_data(client,
+							ADM1021_REG_THYST_R(i));
+			}
+		}
+		data->alarms = i2c_smbus_read_byte_data(client,
+						ADM1021_REG_STATUS) & 0x7c;
+		if (data->type = adm1023) {
+			/*
+			 * The ADM1023 provides 3 extra bits of precision for
+			 * the remote sensor in extra registers.
+			 */
+			data->temp[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_TEMP_PREC) >> 5);
+			data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_TOS_PREC) >> 5);
+			data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_THYST_PREC) >> 5);
+			data->remote_temp_offset +				i2c_smbus_read_byte_data(client,
+						ADM1023_REG_REM_OFFSET);
+			data->remote_temp_offset_prec +				i2c_smbus_read_byte_data(client,
+						ADM1023_REG_REM_OFFSET_PREC);
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
 
 static ssize_t show_temp(struct device *dev,
 			 struct device_attribute *devattr, char *buf)
@@ -409,6 +431,15 @@ static int adm1021_detect(struct i2c_client *client,
 	return 0;
 }
 
+static void adm1021_init_client(struct i2c_client *client)
+{
+	/* Enable ADC and disable suspend mode */
+	i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
+		i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
+	/* Set Conversion rate to 1/sec (this can be tinkered with) */
+	i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
+}
+
 static int adm1021_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -438,69 +469,29 @@ static int adm1021_probe(struct i2c_client *client,
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
-static void adm1021_init_client(struct i2c_client *client)
-{
-	/* Enable ADC and disable suspend mode */
-	i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
-		i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
-	/* Set Conversion rate to 1/sec (this can be tinkered with) */
-	i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
-}
-
-static struct adm1021_data *adm1021_update_device(struct device *dev)
-{
-	struct adm1021_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
-		int i;
-
-		dev_dbg(dev, "Starting adm1021 update\n");
-
-		for (i = 0; i < 2; i++) {
-			data->temp[i] = 1000 *
-				(s8) i2c_smbus_read_byte_data(
-					client, ADM1021_REG_TEMP(i));
-			data->temp_max[i] = 1000 *
-				(s8) i2c_smbus_read_byte_data(
-					client, ADM1021_REG_TOS_R(i));
-			if (data->type != lm84) {
-				data->temp_min[i] = 1000 *
-				  (s8) i2c_smbus_read_byte_data(client,
-							ADM1021_REG_THYST_R(i));
-			}
-		}
-		data->alarms = i2c_smbus_read_byte_data(client,
-						ADM1021_REG_STATUS) & 0x7c;
-		if (data->type = adm1023) {
-			/*
-			 * The ADM1023 provides 3 extra bits of precision for
-			 * the remote sensor in extra registers.
-			 */
-			data->temp[1] += 125 * (i2c_smbus_read_byte_data(
-				client, ADM1023_REG_REM_TEMP_PREC) >> 5);
-			data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
-				client, ADM1023_REG_REM_TOS_PREC) >> 5);
-			data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
-				client, ADM1023_REG_REM_THYST_PREC) >> 5);
-			data->remote_temp_offset -				i2c_smbus_read_byte_data(client,
-						ADM1023_REG_REM_OFFSET);
-			data->remote_temp_offset_prec -				i2c_smbus_read_byte_data(client,
-						ADM1023_REG_REM_OFFSET_PREC);
-		}
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	mutex_unlock(&data->update_lock);
+static const struct i2c_device_id adm1021_id[] = {
+	{ "adm1021", adm1021 },
+	{ "adm1023", adm1023 },
+	{ "max1617", max1617 },
+	{ "max1617a", max1617a },
+	{ "thmc10", thmc10 },
+	{ "lm84", lm84 },
+	{ "gl523sm", gl523sm },
+	{ "mc1066", mc1066 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1021_id);
 
-	return data;
-}
+static struct i2c_driver adm1021_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "adm1021",
+	},
+	.probe		= adm1021_probe,
+	.id_table	= adm1021_id,
+	.detect		= adm1021_detect,
+	.address_list	= normal_i2c,
+};
 
 module_i2c_driver(adm1021_driver);
 
-- 
1.9.1




_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

             reply	other threads:[~2014-07-03 13:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-03 13:45 Axel Lin [this message]
2014-07-03 14:12 ` [lm-sensors] [PATCH] hwmon: (adm1021) Avoid forward declaration Guenter Roeck
2014-07-03 14:21 ` Axel Lin
2014-07-03 14:25 ` Guenter Roeck
2014-07-03 14:27 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404395133.4895.1.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.