diff for duplicates of <1404830963-18274-1-git-send-email-robertcnelson@gmail.com> diff --git a/a/1.txt b/N1/1.txt index d3f4cd6..db09eef 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,7 +2,7 @@ Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> +Signed-off-by: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-rex-pro.dts | 34 ++++ @@ -32,7 +32,7 @@ index 0000000..3c2852b +/* + * Copyright 2014 FEDEVEL, Inc. + * -+ * Author: Robert Nelson <robertcnelson@gmail.com> ++ * Author: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as @@ -53,7 +53,7 @@ index 0000000..3c2852b +}; + +&ecspi3 { -+ flash: m25p80 at 0 { ++ flash: m25p80@0 { + compatible = "sst,sst25vf032b"; + spi-max-frequency = <20000000>; + reg = <0>; @@ -72,7 +72,7 @@ index 0000000..df7bcf8 +/* + * Copyright 2014 FEDEVEL, Inc. + * -+ * Author: Robert Nelson <robertcnelson@gmail.com> ++ * Author: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as @@ -93,7 +93,7 @@ index 0000000..df7bcf8 + #address-cells = <1>; + #size-cells = <0>; + -+ reg_3p3v: regulator at 0 { ++ reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; @@ -102,7 +102,7 @@ index 0000000..df7bcf8 + regulator-always-on; + }; + -+ reg_usbh1_vbus: regulator at 1 { ++ reg_usbh1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; @@ -114,7 +114,7 @@ index 0000000..df7bcf8 + enable-active-high; + }; + -+ reg_usb_otg_vbus: regulator at 2 { ++ reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; @@ -196,7 +196,7 @@ index 0000000..df7bcf8 + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + -+ codec: sgtl5000 at 0a { ++ codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; @@ -211,7 +211,7 @@ index 0000000..df7bcf8 + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + -+ eeprom at 57 { ++ eeprom@57 { + compatible = "at,24c02"; + reg = <0x57>; + }; @@ -428,3 +428,8 @@ index 0000000..df7bcf8 +}; -- 2.0.0 + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 6c4a161..11a06ef 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,17 @@ - "From\0robertcnelson@gmail.com (Robert Nelson)\0" + "From\0Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "Subject\0[PATCH 1/2] ARM: dts: add initial Rex Pro board support\0" "Date\0Tue, 8 Jul 2014 09:49:22 -0500\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org\0" + "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + " Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "\00:1\0" "b\0" "Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI,\n" "Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with\n" "cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage\n" "\n" - "Signed-off-by: Robert Nelson <robertcnelson@gmail.com>\n" + "Signed-off-by: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/Makefile | 1 +\n" " arch/arm/boot/dts/imx6q-rex-pro.dts | 34 ++++\n" @@ -38,7 +41,7 @@ "+/*\n" "+ * Copyright 2014 FEDEVEL, Inc.\n" "+ *\n" - "+ * Author: Robert Nelson <robertcnelson@gmail.com>\n" + "+ * Author: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "+ *\n" "+ * This program is free software; you can redistribute it and/or modify\n" "+ * it under the terms of the GNU General Public License version 2 as\n" @@ -59,7 +62,7 @@ "+};\n" "+\n" "+&ecspi3 {\n" - "+\tflash: m25p80 at 0 {\n" + "+\tflash: m25p80@0 {\n" "+\t\tcompatible = \"sst,sst25vf032b\";\n" "+\t\tspi-max-frequency = <20000000>;\n" "+\t\treg = <0>;\n" @@ -78,7 +81,7 @@ "+/*\n" "+ * Copyright 2014 FEDEVEL, Inc.\n" "+ *\n" - "+ * Author: Robert Nelson <robertcnelson@gmail.com>\n" + "+ * Author: Robert Nelson <robertcnelson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "+ *\n" "+ * This program is free software; you can redistribute it and/or modify\n" "+ * it under the terms of the GNU General Public License version 2 as\n" @@ -99,7 +102,7 @@ "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\treg_3p3v: regulator at 0 {\n" + "+\t\treg_3p3v: regulator@0 {\n" "+\t\t\tcompatible = \"regulator-fixed\";\n" "+\t\t\treg = <0>;\n" "+\t\t\tregulator-name = \"3P3V\";\n" @@ -108,7 +111,7 @@ "+\t\t\tregulator-always-on;\n" "+\t\t};\n" "+\n" - "+\t\treg_usbh1_vbus: regulator at 1 {\n" + "+\t\treg_usbh1_vbus: regulator@1 {\n" "+\t\t\tcompatible = \"regulator-fixed\";\n" "+\t\t\treg = <1>;\n" "+\t\t\tpinctrl-names = \"default\";\n" @@ -120,7 +123,7 @@ "+\t\t\tenable-active-high;\n" "+\t\t};\n" "+\n" - "+\t\treg_usb_otg_vbus: regulator at 2 {\n" + "+\t\treg_usb_otg_vbus: regulator@2 {\n" "+\t\t\tcompatible = \"regulator-fixed\";\n" "+\t\t\treg = <2>;\n" "+\t\t\tpinctrl-names = \"default\";\n" @@ -202,7 +205,7 @@ "+\tpinctrl-0 = <&pinctrl_i2c1>;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tcodec: sgtl5000 at 0a {\n" + "+\tcodec: sgtl5000@0a {\n" "+\t\tcompatible = \"fsl,sgtl5000\";\n" "+\t\treg = <0x0a>;\n" "+\t\tclocks = <&clks 201>;\n" @@ -217,7 +220,7 @@ "+\tpinctrl-0 = <&pinctrl_i2c2>;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\teeprom at 57 {\n" + "+\teeprom@57 {\n" "+\t\tcompatible = \"at,24c02\";\n" "+\t\treg = <0x57>;\n" "+\t};\n" @@ -433,6 +436,11 @@ "+\tstatus = \"okay\";\n" "+};\n" "-- \n" - 2.0.0 + "2.0.0\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -67fbee1e1f5283c12d7c3f2d326f6e9d77f4cb130b83eb87786075441e681b68 +cf4d6edcfb23b54d560f24a487c289bb9f749feb594ddc343da93f9abe43a8d1
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.