[PATCH v2] serial: core: Preserve termios c_cflag for console resume

[Peter Hurley <peter@hurleysoftware.com>]

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/serial_core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b68550d..aab7190 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -239,6 +239,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 		/*
 		 * Turn off DTR and RTS early.
 		 */
+		if (uart_console(uport) && tty)
+			uport->cons->cflag = tty->termios.c_cflag;
+
 		if (!tty || (tty->termios.c_cflag & HUPCL))
 			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
-- 
2.0.0