From: Axel Lin <axel.lin@ingics.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [RFT][PATCH 2/2] hwmon: (thmc50) Convert to devm_hwmon_device_register_with_groups
Date: Thu, 17 Jul 2014 11:06:08 +0000 [thread overview]
Message-ID: <1405595168.13586.4.camel@phoenix> (raw)
Use devm_hwmon_device_register_with_groups() to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/hwmon/thmc50.c | 78 ++++++++++++++++----------------------------------
1 file changed, 25 insertions(+), 53 deletions(-)
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index bb538da..6a0ee90 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -68,7 +68,8 @@ static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
/* Each client has this additional data */
struct thmc50_data {
- struct device *hwmon_dev;
+ struct i2c_client *client;
+ const struct attribute_group *groups[3];
struct mutex update_lock;
enum chips type;
@@ -87,8 +88,8 @@ struct thmc50_data {
static struct thmc50_data *thmc50_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct thmc50_data *data = i2c_get_clientdata(client);
+ struct thmc50_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int timeout = HZ / 5 + (data->type = thmc50 ? HZ : 0);
mutex_lock(&data->update_lock);
@@ -138,8 +139,8 @@ static ssize_t set_analog_out(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct thmc50_data *data = i2c_get_clientdata(client);
+ struct thmc50_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int config;
unsigned long tmp;
int err;
@@ -192,8 +193,8 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct thmc50_data *data = i2c_get_clientdata(client);
+ struct thmc50_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
@@ -221,8 +222,8 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct thmc50_data *data = i2c_get_clientdata(client);
+ struct thmc50_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
@@ -370,9 +371,9 @@ static int thmc50_detect(struct i2c_client *client,
return 0;
}
-static void thmc50_init_client(struct i2c_client *client)
+static void thmc50_init_client(struct thmc50_data *data)
{
- struct thmc50_data *data = i2c_get_clientdata(client);
+ struct i2c_client *client = data->client;
int config;
data->analog_out = i2c_smbus_read_byte_data(client,
@@ -393,59 +394,31 @@ static void thmc50_init_client(struct i2c_client *client)
static int thmc50_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
struct thmc50_data *data;
- int err;
+ struct device *hwmon_dev;
+ int idx = 0;
- data = devm_kzalloc(&client->dev, sizeof(struct thmc50_data),
- GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(struct thmc50_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- i2c_set_clientdata(client, data);
+ data->client = client;
data->type = id->driver_data;
mutex_init(&data->update_lock);
- thmc50_init_client(client);
+ thmc50_init_client(data);
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &thmc50_group);
- if (err)
- return err;
-
- /* Register ADM1022 sysfs hooks */
- if (data->has_temp3) {
- err = sysfs_create_group(&client->dev.kobj, &temp3_group);
- if (err)
- goto exit_remove_sysfs_thmc50;
- }
-
- /* Register a new directory entry with module sensors */
- data->hwmon_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_sysfs;
- }
+ /* sysfs hooks */
+ data->groups[idx++] = &thmc50_group;
- return 0;
-
-exit_remove_sysfs:
- if (data->has_temp3)
- sysfs_remove_group(&client->dev.kobj, &temp3_group);
-exit_remove_sysfs_thmc50:
- sysfs_remove_group(&client->dev.kobj, &thmc50_group);
- return err;
-}
-
-static int thmc50_remove(struct i2c_client *client)
-{
- struct thmc50_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &thmc50_group);
+ /* Register additional ADM1022 sysfs hooks */
if (data->has_temp3)
- sysfs_remove_group(&client->dev.kobj, &temp3_group);
+ data->groups[idx++] = &temp3_group;
- return 0;
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id thmc50_id[] = {
@@ -461,7 +434,6 @@ static struct i2c_driver thmc50_driver = {
.name = "thmc50",
},
.probe = thmc50_probe,
- .remove = thmc50_remove,
.id_table = thmc50_id,
.detect = thmc50_detect,
.address_list = normal_i2c,
--
1.9.1
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2014-07-17 11:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-17 11:06 Axel Lin [this message]
2014-07-18 5:16 ` [lm-sensors] [RFT][PATCH 2/2] hwmon: (thmc50) Convert to devm_hwmon_device_register_with_groups Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405595168.13586.4.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.