All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: James Ban <James.Ban.opensource@diasemi.com>,
	Support Opensource <support.opensource@diasemi.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] regulator: da9211: Remove unnecessary devm_regulator_unregister() calls
Date: Sun, 20 Jul 2014 19:19:35 +0800	[thread overview]
Message-ID: <1405855175.27371.1.camel@phoenix> (raw)

Current code uses devm_regulator_register(), so the resource management code
will ensure that the resource is freed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/da9211-regulator.c | 28 ++++------------------------
 1 file changed, 4 insertions(+), 24 deletions(-)

diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index bd18506..1482ada 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -245,7 +245,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 	ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	data &= DA9211_SLAVE_SEL;
@@ -259,9 +259,8 @@ static int da9211_regulator_init(struct da9211 *chip)
 		else
 			chip->num_regulator = 2;
 	} else {
-		ret = -EINVAL;
 		dev_err(chip->dev, "Configuration is mismatched\n");
-		goto err;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < chip->num_regulator; i++) {
@@ -278,8 +277,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 		if (IS_ERR(chip->rdev[i])) {
 			dev_err(chip->dev,
 				"Failed to register DA9211 regulator\n");
-			ret = PTR_ERR(chip->rdev[i]);
-			goto err_regulator;
+			return PTR_ERR(chip->rdev[i]);
 		}
 
 		if (chip->chip_irq != 0) {
@@ -288,18 +286,12 @@ static int da9211_regulator_init(struct da9211 *chip)
 			if (ret < 0) {
 				dev_err(chip->dev,
 					"Failed to update mask reg: %d\n", ret);
-				goto err_regulator;
+				return ret;
 			}
 		}
 	}
 
 	return 0;
-
-err_regulator:
-	while (--i >= 0)
-		devm_regulator_unregister(chip->dev, chip->rdev[i]);
-err:
-	return ret;
 }
 /*
  * I2C driver interface functions
@@ -353,17 +345,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 	return ret;
 }
 
-static int da9211_i2c_remove(struct i2c_client *i2c)
-{
-	struct da9211 *chip = i2c_get_clientdata(i2c);
-	int i;
-
-	for (i = 0; i < chip->num_regulator; i++)
-		devm_regulator_unregister(chip->dev, chip->rdev[i]);
-
-	return 0;
-}
-
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", 0},
 	{},
@@ -377,7 +358,6 @@ static struct i2c_driver da9211_regulator_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = da9211_i2c_probe,
-	.remove = da9211_i2c_remove,
 	.id_table = da9211_i2c_id,
 };
 
-- 
1.9.1




             reply	other threads:[~2014-07-20 11:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-20 11:19 Axel Lin [this message]
2014-07-25 17:23 ` [PATCH] regulator: da9211: Remove unnecessary devm_regulator_unregister() calls Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405855175.27371.1.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=James.Ban.opensource@diasemi.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.