All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Elder <elder@linaro.org>
To: akpm@linux-foundation.org
Cc: kay@vrfy.org, pmladek@suse.cz, bp@suse.de,
	john.stultz@linaro.org, jack@suse.cz,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 3/7] printk: initialize syslog_prev and console_prev
Date: Mon, 21 Jul 2014 08:02:37 -0500	[thread overview]
Message-ID: <1405947761-26004-4-git-send-email-elder@linaro.org> (raw)
In-Reply-To: <1405947761-26004-1-git-send-email-elder@linaro.org>

Two global variables, "syslog_prev" and "console_prev", maintain a
copy of the flags value used in the log record most recently
formatted for syslog or the console, respectively.

Initially there is no previous formatted log record, and these
variables simply have an initial value 0.  And occasionally log
records can get consumed at a rate such that syslog or the console
can't keep up, in which case those variables (along with their
corresponding position variables) must be reset.  Here too, they're
reset to 0.

This patch changes it so the initial value used is LOG_NEWLINE.
That is, if we know nothing about the prevously-formatted log
record, we can assume it was complete, and ended with a newline.
One exception is that occasionally we reset our syslog or console
(etc.) position variables.  In that case the previously-formatted
record flags value is still valid, so we preserve that information.

This is being done to support the next patch.  Initializing
these variables this way makes LOG_NEWLINE and LOG_CONT be
mutually exclusive, and the next patch uses that fact to simplify
some logic.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mládek <pmladek@suse.cz>
---
 kernel/printk/printk.c | 44 ++++++++++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 9f11eab..2f43116 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -236,7 +236,7 @@ DECLARE_WAIT_QUEUE_HEAD(log_wait);
 /* the next printk record to read by syslog(READ) or /proc/kmsg */
 static u64 syslog_seq;
 static u32 syslog_idx;
-static enum log_flags syslog_prev;
+static enum log_flags syslog_prev = LOG_NEWLINE;
 static size_t syslog_partial;
 
 /* index and sequence number of the first record stored in the buffer */
@@ -250,7 +250,7 @@ static u32 log_next_idx;
 /* the next printk record to write to the console */
 static u64 console_seq;
 static u32 console_idx;
-static enum log_flags console_prev;
+static enum log_flags console_prev = LOG_NEWLINE;
 
 /* the next printk record to read after the last 'clear' command */
 static u64 clear_seq;
@@ -1078,10 +1078,14 @@ static int syslog_print(char __user *buf, int size)
 
 		raw_spin_lock_irq(&logbuf_lock);
 		if (syslog_seq < log_first_seq) {
-			/* messages are gone, move to first one */
+			/*
+			 * Messages are gone, move to first one.
+			 * Don't discard what we know about the
+			 * previously-formatted record.
+			 */
 			syslog_seq = log_first_seq;
 			syslog_idx = log_first_idx;
-			syslog_prev = 0;
+			syslog_prev &= LOG_NEWLINE|LOG_CONT;
 			syslog_partial = 0;
 		}
 		if (syslog_seq == log_next_seq) {
@@ -1154,7 +1158,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 		 */
 		seq = clear_seq;
 		idx = clear_idx;
-		prev = 0;
+		prev = LOG_NEWLINE;
 		while (seq < log_next_seq) {
 			struct printk_log *msg = log_from_idx(idx);
 
@@ -1167,7 +1171,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 		/* move first record forward until length fits into the buffer */
 		seq = clear_seq;
 		idx = clear_idx;
-		prev = 0;
+		prev = LOG_NEWLINE;
 		while (len > size && seq < log_next_seq) {
 			struct printk_log *msg = log_from_idx(idx);
 
@@ -1203,10 +1207,14 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 			raw_spin_lock_irq(&logbuf_lock);
 
 			if (seq < log_first_seq) {
-				/* messages are gone, move to next one */
+				/*
+				 * Messages are gone, move to first one.
+				 * Don't discard what we know about the
+				 * previously-formatted record.
+				 */
 				seq = log_first_seq;
 				idx = log_first_idx;
-				prev = 0;
+				prev &= LOG_NEWLINE|LOG_CONT;
 			}
 		}
 	}
@@ -1308,10 +1316,14 @@ int do_syslog(int type, char __user *buf, int len, bool from_file)
 	case SYSLOG_ACTION_SIZE_UNREAD:
 		raw_spin_lock_irq(&logbuf_lock);
 		if (syslog_seq < log_first_seq) {
-			/* messages are gone, move to first one */
+			/*
+			 * Messages are gone, move to first one.
+			 * Don't discard what we know about the
+			 * previously-formatted record.
+			 */
 			syslog_seq = log_first_seq;
 			syslog_idx = log_first_idx;
-			syslog_prev = 0;
+			syslog_prev &= LOG_NEWLINE|LOG_CONT;
 			syslog_partial = 0;
 		}
 		if (from_file) {
@@ -2156,10 +2168,14 @@ again:
 				      "%s** %u printk messages dropped **\n",
 				      (console_prev & LOG_CONT) ? "\n" : "",
 				      (unsigned)(log_first_seq - console_seq));
-			/* messages are gone, move to first one */
+			/*
+			 * Messages are gone, move to first one.
+			 * Don't discard what we know about the
+			 * previously-formatted record.
+			 */
 			console_seq = log_first_seq;
 			console_idx = log_first_idx;
-			console_prev = 0;
+			console_prev &= LOG_NEWLINE|LOG_CONT;
 		} else {
 			len = 0;
 		}
@@ -2873,7 +2889,7 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	/* calculate length of entire buffer */
 	seq = dumper->cur_seq;
 	idx = dumper->cur_idx;
-	prev = 0;
+	prev = LOG_NEWLINE;
 	while (seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
@@ -2886,7 +2902,7 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	/* move first record forward until length fits into the buffer */
 	seq = dumper->cur_seq;
 	idx = dumper->cur_idx;
-	prev = 0;
+	prev = LOG_NEWLINE;
 	while (l > size && seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
-- 
1.9.1


  parent reply	other threads:[~2014-07-21 13:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-21 13:02 [PATCH v5 0/7] printk: start simplifying some flags Alex Elder
2014-07-21 13:02 ` [PATCH v5 1/7] printk: report dropped messages on separate line Alex Elder
2014-07-21 13:02 ` [PATCH v5 2/7] printk: insert newline for truncated records Alex Elder
2014-07-22  9:45   ` Petr Mládek
2014-07-21 13:02 ` Alex Elder [this message]
2014-07-22 11:48   ` [PATCH v5 3/7] printk: initialize syslog_prev and console_prev Alex Elder
2014-07-22 12:01     ` Petr Mládek
2014-07-21 13:02 ` [PATCH v5 4/7] printk: LOG_CONT and LOG_NEWLINE are opposites Alex Elder
2014-07-21 13:02 ` [PATCH v5 5/7] printk: honor LOG_PREFIX in devkmsg_read() Alex Elder
2014-07-21 13:02 ` [PATCH v5 6/7] printk: honor LOG_PREFIX in msg_print_text() Alex Elder
2014-07-21 13:02 ` [PATCH v5 7/7] printk: correct some more typos Alex Elder
2014-07-22 10:04 ` [PATCH v5 0/7] printk: start simplifying some flags Petr Mládek
2014-07-22 11:23   ` Alex Elder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405947761-26004-4-git-send-email-elder@linaro.org \
    --to=elder@linaro.org \
    --cc=akpm@linux-foundation.org \
    --cc=bp@suse.de \
    --cc=jack@suse.cz \
    --cc=john.stultz@linaro.org \
    --cc=kay@vrfy.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmladek@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.