From: "Robert Schöne" <robert.schoene@tu-dresden.de>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>
Subject: Re: PROBLEM: Kernel OOPS and possible system freeze after concurrent writing to cpufreq/scaling_governor (Resend)
Date: Fri, 25 Jul 2014 15:19:06 +0200 [thread overview]
Message-ID: <1406294346.2399.8.camel@x200t> (raw)
In-Reply-To: <CAKohpomDkU1nBP4+1EkSdDxQESD+1b6kmaELVfGEifqTL+ZOdg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 8796 bytes --]
> Please run this in your repository:
>
> git revert 56d07db
>
> save-quit the editor window and try again..
I just did so, but I still get a kernel OOPS.
However, I've been able to get the call trace this time :)
Jul 25 14:52:55 basti kernel: [ 2073.816176] ------------[ cut here ]------------
Jul 25 14:52:55 basti kernel: [ 2073.816184] WARNING: CPU: 1 PID: 2458 at drivers/cpufreq/cpufreq_governor.c:261 cpufreq_governor_dbs+0x6d2/0x740()
Jul 25 14:52:55 basti kernel: [ 2073.816186] Modules linked in: nfsv3(E) nfsd(E) bnep(E) auth_rpcgss(E) rfcomm(E) bluetooth(E) nfs_acl(E) nfs(E) lockd(E) binfmt_misc(E) sunrpc(E) fscache(E) intel_rapl(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) snd_
hda_codec_hdmi(E) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) kvm_intel(E) snd_hda_intel(E) kvm(E) video(E) snd_hda_controller(E) drm_kms_helper(E) snd_hda_codec(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) snd_hwdep(E) snd_pcm(E) snd_timer(E) drm(
E) snd(E) aesni_intel(E) aes_x86_64(E) ppdev(E) mei_me(E) gpio_ich(E) parport_pc(E) serio_raw(E) mac_hid(E) lpc_ich(E) lp(E) i2c_algo_bit(E) lrw(E) soundcore(E) mei(E) parport(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) tpm_infineon(E) psmouse(E) ahci(E) e1000e
(E) libahci(E) ptp(E) pps_core(E)
Jul 25 14:52:55 basti kernel: [ 2073.816224] CPU: 1 PID: 2458 Comm: tee Tainted: G OE 3.16.0-rc6+ #1
Jul 25 14:52:55 basti kernel: [ 2073.816225] Hardware name: FUJITSU ESPRIMO P700/D3061-A1, BIOS V4.6.4.0 R1.12.0 for D3061-A1x 07/04/2011
Jul 25 14:52:55 basti kernel: [ 2073.816226] 0000000000000009 ffff8800ae403b78 ffffffff8173b0bf 0000000000000000
Jul 25 14:52:55 basti kernel: [ 2073.816229] ffff8800ae403bb0 ffffffff8106c82d 0000000000000000 ffff88022fa27000
Jul 25 14:52:55 basti kernel: [ 2073.816231] 0000000000000005 0000000000000002 ffffffff81cd5d00 ffff8800ae403bc0
Jul 25 14:52:55 basti kernel: [ 2073.816234] Call Trace:
Jul 25 14:52:55 basti kernel: [ 2073.816239] [<ffffffff8173b0bf>] dump_stack+0x45/0x56
Jul 25 14:52:55 basti kernel: [ 2073.816243] [<ffffffff8106c82d>] warn_slowpath_common+0x7d/0xa0
Jul 25 14:52:55 basti kernel: [ 2073.816246] [<ffffffff8106c90a>] warn_slowpath_null+0x1a/0x20
Jul 25 14:52:55 basti kernel: [ 2073.816256] [<ffffffff815e4a12>] cpufreq_governor_dbs+0x6d2/0x740
Jul 25 14:52:55 basti kernel: [ 2073.816266] [<ffffffff810941fc>] ? notifier_call_chain+0x4c/0x70
Jul 25 14:52:55 basti kernel: [ 2073.816269] [<ffffffff815e2757>] od_cpufreq_governor_dbs+0x17/0x20
Jul 25 14:52:55 basti kernel: [ 2073.816272] [<ffffffff815dea50>] __cpufreq_governor+0xb0/0x2a0
Jul 25 14:52:55 basti kernel: [ 2073.816275] [<ffffffff815ded8c>] cpufreq_set_policy+0x14c/0x2f0
Jul 25 14:52:55 basti kernel: [ 2073.816277] [<ffffffff815df796>] store_scaling_governor+0x96/0xf0
Jul 25 14:52:55 basti kernel: [ 2073.816280] [<ffffffff815df100>] ? cpufreq_update_policy+0x1d0/0x1d0
Jul 25 14:52:55 basti kernel: [ 2073.816284] [<ffffffff815de3c9>] store+0x79/0xc0
Jul 25 14:52:55 basti kernel: [ 2073.816288] [<ffffffff81245bed>] sysfs_kf_write+0x3d/0x50
Jul 25 14:52:55 basti kernel: [ 2073.816290] [<ffffffff81245120>] kernfs_fop_write+0xe0/0x160
Jul 25 14:52:55 basti kernel: [ 2073.816292] [<ffffffff811d00d7>] vfs_write+0xb7/0x1f0
Jul 25 14:52:55 basti kernel: [ 2073.816294] [<ffffffff811d0c76>] SyS_write+0x46/0xb0
Jul 25 14:52:55 basti kernel: [ 2073.816296] [<ffffffff817439ff>] tracesys+0xe1/0xe6
Jul 25 14:52:55 basti kernel: [ 2073.816297] ---[ end trace a2dad7e42b22c796 ]---
Jul 25 14:52:55 basti kernel: [ 2073.816702] BUG: unable to handle kernel NULL pointer dereference at (null)
Jul 25 14:52:55 basti kernel: [ 2073.816731] IP: [<ffffffff815e4395>] cpufreq_governor_dbs+0x55/0x740
Jul 25 14:52:55 basti kernel: [ 2073.816751] PGD 36a05067 PUD b47df067 PMD 0
Jul 25 14:52:55 basti kernel: [ 2073.816766] Oops: 0000 [#1] SMP
Jul 25 14:52:55 basti kernel: [ 2073.816779] Modules linked in: nfsv3(E) nfsd(E) bnep(E) auth_rpcgss(E) rfcomm(E) bluetooth(E) nfs_acl(E) nfs(E) lockd(E) binfmt_misc(E) sunrpc(E) fscache(E) intel_rapl(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) snd_hda_codec_hdmi(E) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) kvm_intel(E) snd_hda_intel(E) kvm(E) video(E) snd_hda_controller(E) drm_kms_helper(E) snd_hda_codec(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) snd_hwdep(E) snd_pcm(E) snd_timer(E) drm(E) snd(E) aesni_intel(E) aes_x86_64(E) ppdev(E) mei_me(E) gpio_ich(E) parport_pc(E) serio_raw(E) mac_hid(E) lpc_ich(E) lp(E) i2c_algo_bit(E) lrw(E) soundcore(E) mei(E) parport(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) tpm_infineon(E) psmouse(E) ahci(E) e1000e(E) libahci(E) ptp(E) pps_core(E)
Jul 25 14:52:55 basti kernel: [ 2073.817023] CPU: 1 PID: 2458 Comm: tee Tainted: G W OE 3.16.0-rc6+ #1
Jul 25 14:52:55 basti kernel: [ 2073.817041] Hardware name: FUJITSU ESPRIMO P700/D3061-A1, BIOS V4.6.4.0 R1.12.0 for D3061-A1x 07/04/2011
Jul 25 14:52:55 basti kernel: [ 2073.817065] task: ffff8800b53db240 ti: ffff8800ae400000 task.ti: ffff8800ae400000
Jul 25 14:52:55 basti kernel: [ 2073.817085] RIP: 0010:[<ffffffff815e4395>] [<ffffffff815e4395>] cpufreq_governor_dbs+0x55/0x740
Jul 25 14:52:55 basti kernel: [ 2073.817110] RSP: 0018:ffff8800ae403bd0 EFLAGS: 00010293
Jul 25 14:52:55 basti kernel: [ 2073.817124] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 0000000000000006
Jul 25 14:52:55 basti kernel: [ 2073.817142] RDX: 0000000000000007 RSI: 0000000000000000 RDI: 0000000000000009
Jul 25 14:52:55 basti kernel: [ 2073.817160] RBP: ffff8800ae403c40 R08: 0000000000000086 R09: 000000000000036e
Jul 25 14:52:55 basti kernel: [ 2073.817178] R10: 0000000000000000 R11: ffff8800ae4038a6 R12: ffff88022fa27000
Jul 25 14:52:55 basti kernel: [ 2073.817196] R13: 0000000000000005 R14: 0000000000000002 R15: ffffffff81cd5d00
Jul 25 14:52:55 basti kernel: [ 2073.817214] FS: 00002b63742dab80(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000
Jul 25 14:52:55 basti kernel: [ 2073.817235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 25 14:52:55 basti kernel: [ 2073.817250] CR2: 00002ba7f5d7f300 CR3: 00000000b4ce8000 CR4: 00000000000407e0
Jul 25 14:52:55 basti kernel: [ 2073.817268] Stack:
Jul 25 14:52:55 basti kernel: [ 2073.817274] ffff8800ae403cc8 00000000fffffffd 0000000000000000 0000000000000002
Jul 25 14:52:55 basti kernel: [ 2073.817297] ffff8800ae403c28 ffffffff810941fc ffffffff81cd5720 0000000000000000
Jul 25 14:52:55 basti kernel: [ 2073.817319] 0000000000000002 ffff88022fa27000 0000000000000002 ffffffff81cd5d60
Jul 25 14:52:55 basti kernel: [ 2073.817342] Call Trace:
Jul 25 14:52:55 basti kernel: [ 2073.817351] [<ffffffff810941fc>] ? notifier_call_chain+0x4c/0x70
Jul 25 14:52:55 basti kernel: [ 2073.817367] [<ffffffff815e2757>] od_cpufreq_governor_dbs+0x17/0x20
Jul 25 14:52:55 basti kernel: [ 2073.817384] [<ffffffff815dea50>] __cpufreq_governor+0xb0/0x2a0
Jul 25 14:52:55 basti kernel: [ 2073.817401] [<ffffffff815ded8c>] cpufreq_set_policy+0x14c/0x2f0
Jul 25 14:52:55 basti kernel: [ 2073.817417] [<ffffffff815df796>] store_scaling_governor+0x96/0xf0
Jul 25 14:52:55 basti kernel: [ 2073.817434] [<ffffffff815df100>] ? cpufreq_update_policy+0x1d0/0x1d0
Jul 25 14:52:55 basti kernel: [ 2073.817452] [<ffffffff815de3c9>] store+0x79/0xc0
Jul 25 14:52:55 basti kernel: [ 2073.817467] [<ffffffff81245bed>] sysfs_kf_write+0x3d/0x50
Jul 25 14:52:55 basti kernel: [ 2073.817482] [<ffffffff81245120>] kernfs_fop_write+0xe0/0x160
Jul 25 14:52:55 basti kernel: [ 2073.817498] [<ffffffff811d00d7>] vfs_write+0xb7/0x1f0
Jul 25 14:52:55 basti kernel: [ 2073.817513] [<ffffffff811d0c76>] SyS_write+0x46/0xb0
Jul 25 14:52:55 basti kernel: [ 2073.817527] [<ffffffff817439ff>] tracesys+0xe1/0xe6
Jul 25 14:52:55 basti kernel: [ 2073.817540] Code: 0f 84 60 02 00 00 49 8b 9c 24 88 00 00 00 48 85 db 0f 84 76 06 00 00 41 83 fe 04 0f 84 85 02 00 00 41 83 fe 05 0f 84 4b 02 00 00 <48> 8b 03 44 89 ef ff 50 20 48 89 45 c0 48 8b 03 83 38 01 0f 84
Jul 25 14:52:55 basti kernel: [ 2073.817666] RIP [<ffffffff815e4395>] cpufreq_governor_dbs+0x55/0x740
Jul 25 14:52:55 basti kernel: [ 2073.817685] RSP <ffff8800ae403bd0>
Jul 25 14:52:55 basti kernel: [ 2073.818467] CR2: 0000000000000000
Jul 25 14:52:55 basti kernel: [ 2073.825744] ---[ end trace a2dad7e42b22c797 ]---
--
Dipl.-Inf. Robert Schoene
Computer Scientist - R&D Energy Efficient Computing
Technische Universitaet Dresden
Center for Information Services and High Performance Computing
Distributed and Data Intensive Computing
01062 Dresden
Tel.: +49 (351) 463-42483
Fax : +49 (351) 463-37773
E-Mail: Robert.Schoene@tu-dresden.de
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 6357 bytes --]
next prev parent reply other threads:[~2014-07-25 13:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-16 14:53 PROBLEM: Kernel OOPS and possible system freeze after concurrent writing to cpufreq/scaling_governor Robert Schöne
2014-07-24 7:11 ` PROBLEM: Kernel OOPS and possible system freeze after concurrent writing to cpufreq/scaling_governor (Resend) Robert Schöne
2014-07-24 9:42 ` Viresh Kumar
2014-07-25 8:42 ` Robert Schöne
2014-07-25 9:03 ` Viresh Kumar
2014-07-25 13:19 ` Robert Schöne [this message]
2014-09-08 8:13 ` Robert Schöne
2014-09-08 8:16 ` Robert Schöne
2014-09-08 10:56 ` Viresh Kumar
2014-09-08 12:28 ` Robert Schöne
2014-09-08 12:57 ` Viresh Kumar
2014-09-08 21:14 ` Rafael J. Wysocki
2014-09-09 4:18 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406294346.2399.8.camel@x200t \
--to=robert.schoene@tu-dresden.de \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.