All of lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>,
	Daniel Vetter <daniel.vetter@intel.com>,
	intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 2/3] drm/i915: wait for all DSI FIFOs to be empty
Date: Tue, 29 Jul 2014 15:30:25 +0300	[thread overview]
Message-ID: <1406637025.9702.42.camel@intelbox> (raw)
In-Reply-To: <1405165643-13189-3-git-send-email-shobhit.kumar@intel.com>


[-- Attachment #1.1: Type: text/plain, Size: 3812 bytes --]

On Sat, 2014-07-12 at 17:17 +0530, Shobhit Kumar wrote:
> Ensure that the DSI packets for a particular sequence are completely
> sent before going ahead in the enabling or disabling of the panel
> 
> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>

Reviewed-by: Imre Deak <imre.deak@intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dsi.c     |  8 ++++++++
>  drivers/gpu/drm/i915/intel_dsi_cmd.c | 16 ++++++++++++++++
>  drivers/gpu/drm/i915/intel_dsi_cmd.h |  1 +
>  3 files changed, 25 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 61da0e5..98c78ab 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -152,6 +152,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
>  		if (intel_dsi->dev.dev_ops->enable)
>  			intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
>  
> +		wait_for_dsi_fifo_empty(intel_dsi);
> +
>  		/* assert ip_tg_enable signal */
>  		temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
>  		temp = temp | intel_dsi->port_bits;
> @@ -192,6 +194,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
>  	if (intel_dsi->dev.dev_ops->send_otp_cmds)
>  		intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
>  
> +	wait_for_dsi_fifo_empty(intel_dsi);
> +
>  	/* Enable port in pre-enable phase itself because as per hw team
>  	 * recommendation, port should be enabled befor plane & pipe */
>  	intel_dsi_enable(encoder);
> @@ -232,6 +236,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
>  	DRM_DEBUG_KMS("\n");
>  
>  	if (is_vid_mode(intel_dsi)) {
> +		wait_for_dsi_fifo_empty(intel_dsi);
> +
>  		/* de-assert ip_tg_enable signal */
>  		temp = I915_READ(MIPI_PORT_CTRL(pipe));
>  		I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
> @@ -261,6 +267,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
>  	 * some next enable sequence send turn on packet error is observed */
>  	if (intel_dsi->dev.dev_ops->disable)
>  		intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
> +
> +	wait_for_dsi_fifo_empty(intel_dsi);
>  }
>  
>  static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c
> index 933c863..7f1430a 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_cmd.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c
> @@ -419,3 +419,19 @@ int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs)
>  
>  	return 0;
>  }
> +
> +void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi)
> +{
> +	struct drm_encoder *encoder = &intel_dsi->base.base;
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +	enum pipe pipe = intel_crtc->pipe;
> +	u32 mask;
> +
> +	mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
> +					LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
> +
> +	if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 100))
> +		DRM_ERROR("DPI FIFOs are not empty\n");
> +}
> diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.h b/drivers/gpu/drm/i915/intel_dsi_cmd.h
> index 9a18cbf..46aa1ac 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_cmd.h
> +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.h
> @@ -51,6 +51,7 @@ int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel,
>  			u8 *reqdata, int reqlen, u8 *buf, int buflen);
>  
>  int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs);
> +void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi);
>  
>  /* XXX: questionable write helpers */
>  static inline int dsi_vc_dcs_write_0(struct intel_dsi *intel_dsi,


[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2014-07-29 12:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-12 11:47 [PATCH 0/3] Fixing last of few known issues in DSI and Burst mode Support Shobhit Kumar
2014-07-12 11:47 ` [PATCH 1/3] drm/i915: Add get_config implementation for DSI encoder Shobhit Kumar
2014-07-12 11:58   ` Daniel Vetter
2014-07-14 14:36     ` Kumar, Shobhit
2014-07-14 15:50       ` Daniel Vetter
2014-07-15 12:24         ` Kumar, Shobhit
2014-07-15 12:45         ` [v2] drm/i915: Add correct hw/sw config check " Shobhit Kumar
2014-07-29 12:22           ` Imre Deak
2014-07-30 15:02             ` [v3] " Shobhit Kumar
2014-07-30 16:24               ` Imre Deak
2014-07-29 11:38   ` [PATCH 1/3] drm/i915: Add get_config implementation " Imre Deak
2014-07-29 11:44     ` Daniel Vetter
2014-07-12 11:47 ` [PATCH 2/3] drm/i915: wait for all DSI FIFOs to be empty Shobhit Kumar
2014-07-29 12:30   ` Imre Deak [this message]
2014-07-12 11:47 ` [PATCH 3/3] drm/i915: Add support for Video Burst Mode for MIPI DSI Shobhit Kumar
2014-07-30 12:22   ` Imre Deak
2014-07-30 15:04     ` [v2] " Shobhit Kumar
2014-07-30 20:36       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406637025.9702.42.camel@intelbox \
    --to=imre.deak@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=shobhit.kumar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.