All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Raphaël Poggi" <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: "Raphaël Poggi" <poggi.raph@gmail.com>
Subject: [PATCH 5/5] board: atmel: initialise ecc_mode
Date: Fri,  1 Aug 2014 15:23:24 +0200	[thread overview]
Message-ID: <1406899404-29094-6-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1406899404-29094-1-git-send-email-poggi.raph@gmail.com>

This commit initialise the ecc_mode (NAND_ECC_SOFT) on atmel board init which missing it.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
 arch/arm/boards/at91sam9260ek/init.c    |    1 +
 arch/arm/boards/at91sam9261ek/init.c    |    1 +
 arch/arm/boards/at91sam9263ek/init.c    |    1 +
 arch/arm/boards/at91sam9m10g45ek/init.c |    1 +
 arch/arm/boards/at91sam9m10ihd/init.c   |    1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 1298dde..76e0195 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -51,6 +51,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };
 
diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 9ebc16a..7b8ce98 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -46,6 +46,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index 889b4c2..c8a9d5c 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -43,6 +43,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 6503ebb..cdd7806 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -67,6 +67,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/at91sam9m10ihd/init.c b/arch/arm/boards/at91sam9m10ihd/init.c
index fc37af4..a432e5c 100644
--- a/arch/arm/boards/at91sam9m10ihd/init.c
+++ b/arch/arm/boards/at91sam9m10ihd/init.c
@@ -44,6 +44,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.bus_width_16	= 0,
 	.on_flash_bbt	= 1,
 };
-- 
1.7.9.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-08-01 13:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-01 13:23 [PATCH 0/5] Add device tree support of Atmel NAND driver Raphaël Poggi
2014-08-01 13:23 ` [PATCH 1/5] mtd: atmel_nand: add support for device tree Raphaël Poggi
2014-08-04 17:43   ` Sascha Hauer
2014-08-04 18:26     ` Raphaël Poggi
2014-08-01 13:23 ` [PATCH 2/5] mtd: nand: remove NAND_ATMEL_PMECC Raphaël Poggi
2014-08-01 13:23 ` [PATCH 3/5] board: atmel: initialise the has_pmecc member Raphaël Poggi
2014-08-01 13:23 ` [PATCH 4/5] mtd: atmel_nand: retrieve ecc_mode from pdata Raphaël Poggi
2014-08-01 13:23 ` Raphaël Poggi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406899404-29094-6-git-send-email-poggi.raph@gmail.com \
    --to=poggi.raph@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.