From: Prashant Sreedharan <prashant@broadcom.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>,
Prashant Sreedharan <prashant@broadcom.com>,
Michael Chan <mchan@broadcom.com>
Subject: [PATCH net]tg3: Modify tg3_tso_bug() to handle multiple TX rings
Date: Tue, 5 Aug 2014 16:02:02 -0700 [thread overview]
Message-ID: <1407279722-1485-1-git-send-email-prashant@broadcom.com> (raw)
tg3_tso_bug() was originally designed to handle only HW TX ring 0, Commit
d3f6f3a1d818410c17445bce4f4caab52eb102f1 ("tg3: Prevent page allocation failure
during TSO workaround") changed the driver logic to use tg3_tso_bug() for all
HW TX rings that are enabled. This patch fixes the regression by modifying
tg3_tso_bug() to handle multiple HW TX rings.
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/ethernet/broadcom/tg3.c | 22 ++++++++++++----------
1 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 8afa579..a3dd5dc 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -7830,17 +7830,18 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
static netdev_tx_t tg3_start_xmit(struct sk_buff *, struct net_device *);
-/* Use GSO to workaround a rare TSO bug that may be triggered when the
- * TSO header is greater than 80 bytes.
+/* Use GSO to workaround all TSO packets that meet HW bug conditions
+ * indicated in tg3_tx_frag_set()
*/
-static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
+static int tg3_tso_bug(struct tg3 *tp, struct tg3_napi *tnapi,
+ struct netdev_queue *txq, struct sk_buff *skb)
{
struct sk_buff *segs, *nskb;
u32 frag_cnt_est = skb_shinfo(skb)->gso_segs * 3;
/* Estimate the number of fragments in the worst case */
- if (unlikely(tg3_tx_avail(&tp->napi[0]) <= frag_cnt_est)) {
- netif_stop_queue(tp->dev);
+ if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {
+ netif_tx_stop_queue(txq);
/* netif_tx_stop_queue() must be done before checking
* checking tx index in tg3_tx_avail() below, because in
@@ -7848,13 +7849,14 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
* netif_tx_queue_stopped().
*/
smp_mb();
- if (tg3_tx_avail(&tp->napi[0]) <= frag_cnt_est)
+ if (tg3_tx_avail(tnapi) <= frag_cnt_est)
return NETDEV_TX_BUSY;
- netif_wake_queue(tp->dev);
+ netif_tx_wake_queue(txq);
}
- segs = skb_gso_segment(skb, tp->dev->features & ~(NETIF_F_TSO | NETIF_F_TSO6));
+ segs = skb_gso_segment(skb, tp->dev->features &
+ ~(NETIF_F_TSO | NETIF_F_TSO6));
if (IS_ERR(segs) || !segs)
goto tg3_tso_bug_end;
@@ -7930,7 +7932,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (!skb_is_gso_v6(skb)) {
if (unlikely((ETH_HLEN + hdr_len) > 80) &&
tg3_flag(tp, TSO_BUG))
- return tg3_tso_bug(tp, skb);
+ return tg3_tso_bug(tp, tnapi, txq, skb);
ip_csum = iph->check;
ip_tot_len = iph->tot_len;
@@ -8061,7 +8063,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
iph->tot_len = ip_tot_len;
}
tcph->check = tcp_csum;
- return tg3_tso_bug(tp, skb);
+ return tg3_tso_bug(tp, tnapi, txq, skb);
}
/* If the workaround fails due to memory/mapping
--
1.7.1
next reply other threads:[~2014-08-05 23:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-05 23:02 Prashant Sreedharan [this message]
2014-08-05 23:49 ` [PATCH net]tg3: Modify tg3_tso_bug() to handle multiple TX rings David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407279722-1485-1-git-send-email-prashant@broadcom.com \
--to=prashant@broadcom.com \
--cc=davem@davemloft.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.