From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Marek Vasut <marex@denx.de>, Huang Shijie <b32955@freescale.com>,
Brian Norris <computersforpeace@gmail.com>,
zajec5@gmail.com
Subject: [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions
Date: Wed, 6 Aug 2014 18:16:57 -0700 [thread overview]
Message-ID: <1407374222-8448-4-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1407374222-8448-1-git-send-email-computersforpeace@gmail.com>
We shouldn't have *every* function checking if a previous write is
complete; this should be done synchronously after each write/erase.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/spi-nor/spi-nor.c | 36 +++++++++---------------------------
1 file changed, 9 insertions(+), 27 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d77c93232b76..227e2743203e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -229,15 +229,8 @@ static int wait_till_ready(struct spi_nor *nor)
*/
static int erase_chip(struct spi_nor *nor)
{
- int ret;
-
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- return ret;
-
/* Send write enable, then erase commands. */
write_enable(nor);
@@ -300,6 +293,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
goto erase_err;
}
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
+
/* REVISIT in some cases we could speed up erasing large regions
* by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
* to use "small sector erase", but that's not always optimal.
@@ -315,6 +312,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
addr += mtd->erasesize;
len -= mtd->erasesize;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
}
}
@@ -342,11 +343,6 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset < mtd->size - (mtd->size / 2))
@@ -389,11 +385,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset+len > mtd->size - (mtd->size / 64))
@@ -710,11 +701,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto time_out;
-
write_enable(nor);
nor->sst_write_second = false;
@@ -786,11 +772,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto write_err;
-
write_enable(nor);
page_offset = to & (nor->page_size - 1);
@@ -819,6 +800,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
}
}
+ ret = spi_nor_wait_till_ready(nor);
write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
--
1.9.1
next prev parent reply other threads:[~2014-08-07 1:21 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-07 1:16 [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
2014-08-07 1:16 ` [PATCH 1/8] mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 6:25 ` Huang Shijie
2014-08-11 17:59 ` Brian Norris
2014-09-10 7:26 ` [PATCH v2 1/10] " Brian Norris
2014-08-07 1:16 ` [PATCH 2/8] mtd: spi-nor: handle timeout errors in spi_nor_write() Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 7:37 ` Huang Shijie
2014-08-07 1:16 ` Brian Norris [this message]
2014-08-07 14:24 ` [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions Marek Vasut
2014-08-09 8:42 ` Huang Shijie
2014-08-11 18:23 ` Brian Norris
2014-08-12 1:37 ` Huang Shijie
2014-08-07 1:16 ` [PATCH 4/8] mtd: m25p80: drop wait-till-ready checks Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:16 ` [PATCH 5/8] mtd: fsl-quadspi: " Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:17 ` [PATCH 6/8] mtd: spi-nor: drop replaceable wait-till-ready function pointer Brian Norris
2014-08-07 14:25 ` Marek Vasut
2014-08-09 9:53 ` Huang Shijie
2014-08-11 18:43 ` Brian Norris
2014-08-12 1:16 ` Huang Shijie
2014-09-10 7:02 ` Brian Norris
2014-08-12 5:13 ` Rafał Miłecki
2014-08-12 5:14 ` Rafał Miłecki
2014-08-07 1:17 ` [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands Brian Norris
2014-08-07 14:25 ` Marek Vasut
2014-08-09 10:52 ` Huang Shijie
2014-08-11 18:48 ` Brian Norris
2014-08-12 0:59 ` Huang Shijie
2014-09-10 7:05 ` Brian Norris
2014-09-10 15:20 ` Huang Shijie
2014-09-10 7:47 ` Brian Norris
2014-09-10 16:12 ` Huang Shijie
2014-09-10 23:25 ` Brian Norris
2014-11-05 10:29 ` [PATCH v2] " Brian Norris
2014-11-06 3:39 ` Huang Shijie
2014-12-01 8:19 ` Brian Norris
2014-08-07 1:17 ` [RFC 8/8] debug: mtd: spi-nor: add BUG_ON() prints to check for !ready Brian Norris
2014-08-07 14:26 ` Marek Vasut
2014-11-05 10:10 ` [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407374222-8448-4-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=b32955@freescale.com \
--cc=linux-mtd@lists.infradead.org \
--cc=marex@denx.de \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.