From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Marek Vasut <marex@denx.de>, Huang Shijie <b32955@freescale.com>,
Brian Norris <computersforpeace@gmail.com>,
zajec5@gmail.com
Subject: [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands
Date: Wed, 6 Aug 2014 18:17:01 -0700 [thread overview]
Message-ID: <1407374222-8448-8-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1407374222-8448-1-git-send-email-computersforpeace@gmail.com>
write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c.
But this should be handled within the spi-nor abstraction layer.
At the same time, let's add write_disable() after erasing, so we don't
leave the flash in a write-enabled state afterward.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/devices/m25p80.c | 5 -----
drivers/mtd/spi-nor/fsl-quadspi.c | 5 -----
drivers/mtd/spi-nor/spi-nor.c | 7 ++++---
3 files changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 96226ea69f90..116d979ffdb9 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -158,11 +158,6 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
flash->mtd.erasesize / 1024, (u32)offset);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
/* Set up command buffer. */
flash->command[0] = nor->erase_opcode;
m25p_addr2cmd(nor, offset, flash->command);
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 9c13622a0c7a..07fbfb0a7738 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -738,11 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 874e6d9a0b02..d08d9f8bb9bd 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -226,9 +226,6 @@ static int erase_chip(struct spi_nor *nor)
{
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Send write enable, then erase commands. */
- write_enable(nor);
-
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
}
@@ -281,6 +278,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
if (ret)
return ret;
+ write_enable(nor);
+
/* whole-chip erase? */
if (len == mtd->size) {
if (erase_chip(nor)) {
@@ -314,6 +313,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
}
}
+ write_disable(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
instr->state = MTD_ERASE_DONE;
--
1.9.1
next prev parent reply other threads:[~2014-08-07 1:21 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-07 1:16 [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
2014-08-07 1:16 ` [PATCH 1/8] mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 6:25 ` Huang Shijie
2014-08-11 17:59 ` Brian Norris
2014-09-10 7:26 ` [PATCH v2 1/10] " Brian Norris
2014-08-07 1:16 ` [PATCH 2/8] mtd: spi-nor: handle timeout errors in spi_nor_write() Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 7:37 ` Huang Shijie
2014-08-07 1:16 ` [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-09 8:42 ` Huang Shijie
2014-08-11 18:23 ` Brian Norris
2014-08-12 1:37 ` Huang Shijie
2014-08-07 1:16 ` [PATCH 4/8] mtd: m25p80: drop wait-till-ready checks Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:16 ` [PATCH 5/8] mtd: fsl-quadspi: " Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:17 ` [PATCH 6/8] mtd: spi-nor: drop replaceable wait-till-ready function pointer Brian Norris
2014-08-07 14:25 ` Marek Vasut
2014-08-09 9:53 ` Huang Shijie
2014-08-11 18:43 ` Brian Norris
2014-08-12 1:16 ` Huang Shijie
2014-09-10 7:02 ` Brian Norris
2014-08-12 5:13 ` Rafał Miłecki
2014-08-12 5:14 ` Rafał Miłecki
2014-08-07 1:17 ` Brian Norris [this message]
2014-08-07 14:25 ` [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands Marek Vasut
2014-08-09 10:52 ` Huang Shijie
2014-08-11 18:48 ` Brian Norris
2014-08-12 0:59 ` Huang Shijie
2014-09-10 7:05 ` Brian Norris
2014-09-10 15:20 ` Huang Shijie
2014-09-10 7:47 ` Brian Norris
2014-09-10 16:12 ` Huang Shijie
2014-09-10 23:25 ` Brian Norris
2014-11-05 10:29 ` [PATCH v2] " Brian Norris
2014-11-06 3:39 ` Huang Shijie
2014-12-01 8:19 ` Brian Norris
2014-08-07 1:17 ` [RFC 8/8] debug: mtd: spi-nor: add BUG_ON() prints to check for !ready Brian Norris
2014-08-07 14:26 ` Marek Vasut
2014-11-05 10:10 ` [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407374222-8448-8-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=b32955@freescale.com \
--cc=linux-mtd@lists.infradead.org \
--cc=marex@denx.de \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.