[Qemu-devel] [PATCH 1/2] usb: Fix bootindex for portnr > 9

[Markus Armbruster <armbru@redhat.com>]

We identify devices by their Open Firmware device paths.  The encoding
of the host controller and hub port numbers is incorrect:
usb_get_fw_dev_path() formats them in decimal, while SeaBIOS uses
hexadecimal.  When some port number > 9, SeaBIOS will miss the
bootindex (lucky case), or apply it to another device (unlucky case).

The relevant spec[*] agrees with SeaBIOS (and OVMF, for that matter).
Change %d to %x.

Bug can bite only with host controllers or hubs sporting more than ten
ports.  I'm not aware of any.

[*] Open Firmware Recommended Practice: Universal Serial Bus,
Version 1, Section 3.2.1 Device Node Address Representation
http://www.openfirmware.org/1275/bindings/usb/usb-1_0.ps

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 hw/usb/bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/usb/bus.c b/hw/usb/bus.c
index 927a47b..516fb52 100644
--- a/hw/usb/bus.c
+++ b/hw/usb/bus.c
@@ -589,11 +589,11 @@ static char *usb_get_fw_dev_path(DeviceState *qdev)
         nr = strtol(in, &in, 10);
         if (in[0] == '.') {
             /* some hub between root port and device */
-            pos += snprintf(fw_path + pos, fw_len - pos, "hub@%ld/", nr);
+            pos += snprintf(fw_path + pos, fw_len - pos, "hub@%lx/", nr);
             in++;
         } else {
             /* the device itself */
-            pos += snprintf(fw_path + pos, fw_len - pos, "%s@%ld",
+            pos += snprintf(fw_path + pos, fw_len - pos, "%s@%lx",
                             qdev_fw_name(qdev), nr);
             break;
         }
-- 
1.9.3