From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/4] cleanup code which handles the Android sparse image format
Date: Thu, 28 Aug 2014 10:53:53 -0700 [thread overview]
Message-ID: <1409248434-25762-4-git-send-email-srae@broadcom.com> (raw)
In-Reply-To: <1409248434-25762-1-git-send-email-srae@broadcom.com>
- update license format
- port dprintf() to debug()
- update formatting
Signed-off-by: Steve Rae <srae@broadcom.com>
---
Changes in v2:
- use BSD-3-Clause
common/aboot.c | 120 ++++++++++++++++++++++++++-------------------------------
1 file changed, 55 insertions(+), 65 deletions(-)
diff --git a/common/aboot.c b/common/aboot.c
index a302c92..351199e 100644
--- a/common/aboot.c
+++ b/common/aboot.c
@@ -3,31 +3,9 @@
* All rights reserved.
*
* Copyright (c) 2009-2014, The Linux Foundation. All rights reserved.
+ * Portions Copyright 2014 Broadcom Corporation.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of The Linux Foundation nor
- * the names of its contributors may be used to endorse or promote
- * products derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+ * SPDX-License-Identifier: BSD-3-Clause
*/
void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
@@ -70,23 +48,24 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
}
data += sparse_header->file_hdr_sz;
- if(sparse_header->file_hdr_sz > sizeof(sparse_header_t))
+ if (sparse_header->file_hdr_sz > sizeof(sparse_header_t))
{
- /* Skip the remaining bytes in a header that is longer than
+ /*
+ * Skip the remaining bytes in a header that is longer than
* we expected.
*/
data += (sparse_header->file_hdr_sz - sizeof(sparse_header_t));
}
- dprintf (SPEW, "=== Sparse Image Header ===\n");
- dprintf (SPEW, "magic: 0x%x\n", sparse_header->magic);
- dprintf (SPEW, "major_version: 0x%x\n", sparse_header->major_version);
- dprintf (SPEW, "minor_version: 0x%x\n", sparse_header->minor_version);
- dprintf (SPEW, "file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
- dprintf (SPEW, "chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
- dprintf (SPEW, "blk_sz: %d\n", sparse_header->blk_sz);
- dprintf (SPEW, "total_blks: %d\n", sparse_header->total_blks);
- dprintf (SPEW, "total_chunks: %d\n", sparse_header->total_chunks);
+ debug("=== Sparse Image Header ===\n");
+ debug("magic: 0x%x\n", sparse_header->magic);
+ debug("major_version: 0x%x\n", sparse_header->major_version);
+ debug("minor_version: 0x%x\n", sparse_header->minor_version);
+ debug("file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
+ debug("chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
+ debug("blk_sz: %d\n", sparse_header->blk_sz);
+ debug("total_blks: %d\n", sparse_header->total_blks);
+ debug("total_chunks: %d\n", sparse_header->total_chunks);
/* Start processing chunks */
for (chunk=0; chunk<sparse_header->total_chunks; chunk++)
@@ -95,33 +74,37 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
chunk_header = (chunk_header_t *) data;
data += sizeof(chunk_header_t);
- dprintf (SPEW, "=== Chunk Header ===\n");
- dprintf (SPEW, "chunk_type: 0x%x\n", chunk_header->chunk_type);
- dprintf (SPEW, "chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
- dprintf (SPEW, "total_size: 0x%x\n", chunk_header->total_sz);
+ debug("=== Chunk Header ===\n");
+ debug("chunk_type: 0x%x\n", chunk_header->chunk_type);
+ debug("chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
+ debug("total_size: 0x%x\n", chunk_header->total_sz);
- if(sparse_header->chunk_hdr_sz > sizeof(chunk_header_t))
+ if (sparse_header->chunk_hdr_sz > sizeof(chunk_header_t))
{
- /* Skip the remaining bytes in a header that is longer than
- * we expected.
+ /*
+ * Skip the remaining bytes in a header that is longer
+ * than we expected.
*/
- data += (sparse_header->chunk_hdr_sz - sizeof(chunk_header_t));
+ data += (sparse_header->chunk_hdr_sz -
+ sizeof(chunk_header_t));
}
chunk_data_sz = sparse_header->blk_sz * chunk_header->chunk_sz;
switch (chunk_header->chunk_type)
{
case CHUNK_TYPE_RAW:
- if(chunk_header->total_sz != (sparse_header->chunk_hdr_sz +
- chunk_data_sz))
+ if (chunk_header->total_sz !=
+ (sparse_header->chunk_hdr_sz + chunk_data_sz))
{
- fastboot_fail("Bogus chunk size for chunk type Raw");
+ fastboot_fail(
+ "Bogus chunk size for chunk type Raw");
return;
}
- if(mmc_write(ptn + ((uint64_t)total_blocks*sparse_header->blk_sz),
- chunk_data_sz,
- (unsigned int*)data))
+ if (mmc_write(ptn +
+ ((uint64_t)total_blocks *
+ sparse_header->blk_sz),
+ chunk_data_sz, (unsigned int *)data))
{
fastboot_fail("flash write failure");
return;
@@ -131,17 +114,22 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
case CHUNK_TYPE_FILL:
- if(chunk_header->total_sz != (sparse_header->chunk_hdr_sz +
- sizeof(uint32_t)))
+ if (chunk_header->total_sz !=
+ (sparse_header->chunk_hdr_sz + sizeof(uint32_t)))
{
- fastboot_fail("Bogus chunk size for chunk type FILL");
+ fastboot_fail(
+ "Bogus chunk size for chunk type FILL");
return;
}
- fill_buf = (uint32_t *)memalign(CACHE_LINE, ROUNDUP(sparse_header->blk_sz, CACHE_LINE));
+ fill_buf = (uint32_t *)
+ memalign(CACHE_LINE,
+ ROUNDUP(sparse_header->blk_sz,
+ CACHE_LINE));
if (!fill_buf)
{
- fastboot_fail("Malloc failed for: CHUNK_TYPE_FILL");
+ fastboot_fail(
+ "Malloc failed for: CHUNK_TYPE_FILL");
return;
}
@@ -156,9 +144,10 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
for (i = 0; i < chunk_blk_cnt; i++)
{
- if(mmc_write(ptn + ((uint64_t)total_blocks*sparse_header->blk_sz),
- sparse_header->blk_sz,
- fill_buf))
+ if (mmc_write(ptn +
+ ((uint64_t)total_blocks *
+ sparse_header->blk_sz),
+ sparse_header->blk_sz, fill_buf))
{
fastboot_fail("flash write failure");
free(fill_buf);
@@ -176,9 +165,11 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
case CHUNK_TYPE_CRC:
- if(chunk_header->total_sz != sparse_header->chunk_hdr_sz)
+ if (chunk_header->total_sz !=
+ sparse_header->chunk_hdr_sz)
{
- fastboot_fail("Bogus chunk size for chunk type Dont Care");
+ fastboot_fail(
+ "Bogus chunk size for chunk type Dont Care");
return;
}
total_blocks += chunk_header->chunk_sz;
@@ -186,19 +177,18 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
default:
- dprintf(CRITICAL, "Unkown chunk type: %x\n",chunk_header->chunk_type);
+ debug("Unkown chunk type: %x\n",
+ chunk_header->chunk_type);
fastboot_fail("Unknown chunk type");
return;
}
}
- dprintf(INFO, "Wrote %d blocks, expected to write %d blocks\n",
- total_blocks, sparse_header->total_blks);
+ debug("Wrote %d blocks, expected to write %d blocks\n",
+ total_blocks, sparse_header->total_blks);
- if(total_blocks != sparse_header->total_blks)
- {
+ if (total_blocks != sparse_header->total_blks)
fastboot_fail("sparse image write failure");
- }
fastboot_okay("");
return;
--
1.8.5
next prev parent reply other threads:[~2014-08-28 17:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-28 17:53 [U-Boot] [PATCH v2 0/4] Implement "sparse format" for fastboot Steve Rae
2014-08-28 17:53 ` [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format Steve Rae
2014-08-28 21:16 ` Tom Rini
2014-08-28 21:31 ` Steve Rae
2014-08-28 21:52 ` Steve Rae
2014-08-29 8:20 ` Marek Vasut
2014-08-29 15:11 ` Tom Rini
2014-08-29 17:38 ` Steve Rae
2014-08-29 20:54 ` Marek Vasut
2014-08-29 23:13 ` Steve Rae
2014-09-03 0:03 ` Steve Rae
2014-09-03 0:33 ` Tom Rini
2014-08-28 17:53 ` [U-Boot] [PATCH v2 2/4] update code which handles " Steve Rae
2014-08-28 17:53 ` Steve Rae [this message]
2014-08-28 19:43 ` [U-Boot] [PATCH v2 3/4] cleanup code which handles the " Tom Rini
2014-08-28 20:33 ` Steve Rae
2014-08-28 17:53 ` [U-Boot] [PATCH v2 4/4] implement " Steve Rae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409248434-25762-4-git-send-email-srae@broadcom.com \
--to=srae@broadcom.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.