From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] iommu/arm-smmu: fix architecture version detection
Date: Thu, 4 Sep 2014 17:50:04 +0100 [thread overview]
Message-ID: <1409849405-17347-7-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1409849405-17347-1-git-send-email-will.deacon@arm.com>
From: Robin Murphy <Robin.Murphy@arm.com>
The SMMU driver was relying on a quirk of MMU-500 r2px to identify
the correct architecture version. Since this does not apply to other
implementations, make the architecture version for each supported
implementation explicit.
While we're at it, remove the unnecessary #ifdef since the dependencies
for CONFIG_ARM_SMMU already imply CONFIG_OF.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
drivers/iommu/arm-smmu.c | 47 +++++++++++++++++++++++++----------------------
1 file changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 2a7e3331b93a..1f447e7843ed 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -331,6 +331,11 @@ module_param_named(force_stage, force_stage, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(force_stage,
"Force SMMU mappings to be installed at a particular stage of translation. A value of '1' or '2' forces the corresponding stage. All other values are ignored (i.e. no stage is forced). Note that selecting a specific stage will disable support for nested translation.");
+enum arm_smmu_arch_version {
+ ARM_SMMU_V1 = 1,
+ ARM_SMMU_V2,
+};
+
struct arm_smmu_smr {
u8 idx;
u16 mask;
@@ -365,7 +370,7 @@ struct arm_smmu_device {
#define ARM_SMMU_OPT_SECURE_CFG_ACCESS (1 << 0)
u32 options;
- int version;
+ enum arm_smmu_arch_version version;
u32 num_context_banks;
u32 num_s2_context_banks;
@@ -730,7 +735,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain)
/* CBAR */
reg = cfg->cbar;
- if (smmu->version == 1)
+ if (smmu->version == ARM_SMMU_V1)
reg |= cfg->irptndx << CBAR_IRPTNDX_SHIFT;
/*
@@ -745,7 +750,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain)
}
writel_relaxed(reg, gr1_base + ARM_SMMU_GR1_CBAR(cfg->cbndx));
- if (smmu->version > 1) {
+ if (smmu->version > ARM_SMMU_V1) {
/* CBA2R */
#ifdef CONFIG_64BIT
reg = CBA2R_RW64_64BIT;
@@ -818,7 +823,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain)
* TTBCR
* We use long descriptor, with inner-shareable WBWA tables in TTBR0.
*/
- if (smmu->version > 1) {
+ if (smmu->version > ARM_SMMU_V1) {
if (PAGE_SIZE == SZ_4K)
reg = TTBCR_TG0_4K;
else
@@ -915,7 +920,7 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
goto out_unlock;
cfg->cbndx = ret;
- if (smmu->version == 1) {
+ if (smmu->version == ARM_SMMU_V1) {
cfg->irptndx = atomic_inc_return(&smmu->irptndx);
cfg->irptndx %= smmu->num_context_irqs;
} else {
@@ -1726,10 +1731,6 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
u32 id;
dev_notice(smmu->dev, "probing hardware configuration...\n");
-
- /* Primecell ID */
- id = readl_relaxed(gr0_base + ARM_SMMU_GR0_PIDR2);
- smmu->version = ((id >> PIDR2_ARCH_SHIFT) & PIDR2_ARCH_MASK) + 1;
dev_notice(smmu->dev, "SMMUv%d with:\n", smmu->version);
/* ID0 */
@@ -1846,7 +1847,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
size = arm_smmu_id_size_to_bits((id >> ID2_OAS_SHIFT) & ID2_OAS_MASK);
smmu->s2_output_size = min_t(unsigned long, PHYS_MASK_SHIFT, size);
- if (smmu->version == 1) {
+ if (smmu->version == ARM_SMMU_V1) {
smmu->s1_input_size = 32;
} else {
#ifdef CONFIG_64BIT
@@ -1877,8 +1878,18 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
return 0;
}
+static struct of_device_id arm_smmu_of_match[] = {
+ { .compatible = "arm,smmu-v1", .data = (void *)ARM_SMMU_V1 },
+ { .compatible = "arm,smmu-v2", .data = (void *)ARM_SMMU_V2 },
+ { .compatible = "arm,mmu-400", .data = (void *)ARM_SMMU_V1 },
+ { .compatible = "arm,mmu-500", .data = (void *)ARM_SMMU_V2 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
+
static int arm_smmu_device_dt_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id;
struct resource *res;
struct arm_smmu_device *smmu;
struct device *dev = &pdev->dev;
@@ -1893,6 +1904,9 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
}
smmu->dev = dev;
+ of_id = of_match_node(arm_smmu_of_match, dev->of_node);
+ smmu->version = (enum arm_smmu_arch_version)of_id->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
smmu->base = devm_ioremap_resource(dev, res);
if (IS_ERR(smmu->base))
@@ -1957,7 +1971,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
parse_driver_options(smmu);
- if (smmu->version > 1 &&
+ if (smmu->version > ARM_SMMU_V1 &&
smmu->num_context_banks != smmu->num_context_irqs) {
dev_err(dev,
"found only %d context interrupt(s) but %d required\n",
@@ -2038,17 +2052,6 @@ static int arm_smmu_device_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
-static struct of_device_id arm_smmu_of_match[] = {
- { .compatible = "arm,smmu-v1", },
- { .compatible = "arm,smmu-v2", },
- { .compatible = "arm,mmu-400", },
- { .compatible = "arm,mmu-500", },
- { },
-};
-MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
-#endif
-
static struct platform_driver arm_smmu_driver = {
.driver = {
.owner = THIS_MODULE,
--
2.1.0
next prev parent reply other threads:[~2014-09-04 16:50 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 16:49 [PATCH 0/7] iommu/arm-smmu: misc. driver updates targetting 3.18 Will Deacon
2014-09-04 16:49 ` [PATCH 1/7] iommu/arm-smmu: allow translation stage to be forced on the cmdline Will Deacon
2014-09-04 16:50 ` [PATCH 2/7] iommu/arm-smmu: add support for multi-master iommu groups Will Deacon
[not found] ` <1409849405-17347-3-git-send-email-will.deacon-5wv7dgnIgG8@public.gmane.org>
2014-09-15 15:22 ` Joerg Roedel
2014-09-15 15:22 ` Joerg Roedel
[not found] ` <20140915152257.GX28786-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2014-09-15 18:36 ` Will Deacon
2014-09-15 18:36 ` Will Deacon
2014-09-04 16:50 ` [PATCH 3/7] iommu/arm-smmu: put iommu_domain pointer in dev->archdata.iommu Will Deacon
2014-09-04 16:50 ` [PATCH 4/7] iommu/arm-smmu: use page shift instead of page size to avoid division Will Deacon
2014-09-04 16:50 ` [PATCH 5/7] iommu/arm-smmu: don't bother truncating the s1 output size to VA_BITS Will Deacon
[not found] ` <1409849405-17347-6-git-send-email-will.deacon-5wv7dgnIgG8@public.gmane.org>
2014-12-01 20:39 ` Andreas Schwab
2014-12-01 20:39 ` Andreas Schwab
[not found] ` <87mw77cdft.fsf-hBGjKatGTSWzQB+pC5nmwQ@public.gmane.org>
2014-12-02 9:26 ` Will Deacon
2014-12-02 9:26 ` Will Deacon
2014-09-04 16:50 ` Will Deacon [this message]
2014-09-04 16:50 ` [PATCH 7/7] iommu/arm-smmu: support MMU-401 Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409849405-17347-7-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.