All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Weike Chen <alvin.chen@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	atull <atull@opensource.altera.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Boon Leong Ong <boon.leong.ong@intel.com>,
	Hock Leong Kweh <hock.leong.kweh@intel.com>,
	Darren Hart <dvhart@linux.intel.com>,
	Sebastian Andrzej Siewior <sebastian@breakpoint.cc>,
	Mika Westerberg <mika.westerberg@intel.com>,
	Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH 3/4 v4] GPIO: gpio-dwapb: Support Debounce
Date: Tue, 16 Sep 2014 11:37:49 +0300	[thread overview]
Message-ID: <1410856669.7023.54.camel@linux.intel.com> (raw)
In-Reply-To: <1410859335-11080-4-git-send-email-alvin.chen@intel.com>

On Tue, 2014-09-16 at 02:22 -0700, Weike Chen wrote:
> This patch enables 'debounce' for the designware GPIO, and
> it is based on Josef Ahmad's previous work.
> 
> Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
> Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>

This line is wrong. How come?

Couple of minor comments below, and after addressing them, please, use 
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Weike Chen <alvin.chen@intel.com>
> ---
>  drivers/gpio/gpio-dwapb.c |   28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> index 534945c..9a76e3c 100644
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -37,6 +37,7 @@
>  #define GPIO_INTTYPE_LEVEL	0x38
>  #define GPIO_INT_POLARITY	0x3c
>  #define GPIO_INTSTATUS		0x40
> +#define GPIO_PORTA_DEBOUNCE	0x48
>  #define GPIO_PORTA_EOI		0x4c
>  #define GPIO_EXT_PORTA		0x50
>  #define GPIO_EXT_PORTB		0x54
> @@ -235,6 +236,29 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type)
>  	return 0;
>  }
>  
> +static int dwapb_gpio_set_debounce(struct gpio_chip *gc,
> +				   unsigned offset, unsigned debounce)
> +{
> +	struct bgpio_chip *bgc = to_bgpio_chip(gc);
> +	struct dwapb_gpio_port *port =
> +			container_of(bgc, struct dwapb_gpio_port, bgc);

Does it make sense to introduce an inline helper like

static inline struct dwapb_gpio_port *to_dwapb_gpio_port(struct
bgpio_chip *gc)
{...}

?

There is also another place where it could be used.

> +	struct dwapb_gpio *gpio = port->gpio;
> +	unsigned long flags, val_deb;
> +	unsigned long mask = bgc->pin2mask(bgc, offset);
> +
> +	spin_lock_irqsave(&bgc->lock, flags);
> +
> +	val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
> +	if (debounce)
> +		dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, mask | val_deb);

May you put value on the first place? Like 'val_deb | mask'.

> +	else
> +		dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ~mask & val_deb);

Ditto.

> +

> +	spin_unlock_irqrestore(&bgc->lock, flags);
> +
> +	return 0;
> +}
> +
>  static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id)
>  {
>  	u32 worked;
> @@ -373,6 +397,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
>  	port->bgc.gc.ngpio = pp->ngpio;
>  	port->bgc.gc.base = pp->gpio_base;
>  
> +	/* Only port A support debounce */
> +	if (pp->idx == 0)
> +		port->bgc.gc.set_debounce = dwapb_gpio_set_debounce;
> +
>  	if (pp->irq)
>  		dwapb_configure_irqs(gpio, port, pp);
>  


-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy


  reply	other threads:[~2014-09-16  8:37 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-16  9:22 [PATCH 0/4 v4] The Designware GPIO Supporting Weike Chen
2014-09-16  9:22 ` [PATCH 1/4 v4] GPIO: gpio-dwapb: Enable platform driver binding to MFD driver Weike Chen
2014-09-16 14:22   ` atull
2014-09-16 14:22     ` atull
2014-09-17  7:09     ` Chen, Alvin
2014-09-16  9:22 ` [PATCH 2/4 v4] GPIO: gpio-dwapb: Change readl&writel to dwapb_read&dwapb_write Weike Chen
2014-09-16  9:22 ` [PATCH 3/4 v4] GPIO: gpio-dwapb: Support Debounce Weike Chen
2014-09-16  8:37   ` Andy Shevchenko [this message]
2014-09-17  6:47     ` Chen, Alvin
2014-09-17  6:47       ` Chen, Alvin
2014-09-16  9:22 ` [PATCH 4/4 v4] GPIO: gpio-dwapb: Suspend & Resume PM enabling Weike Chen
2014-09-16  7:24   ` Shevchenko, Andriy
2014-09-16  7:24     ` Shevchenko, Andriy
     [not found]   ` <1410859335-11080-5-git-send-email-alvin.chen-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-09-16  7:26     ` Andy Shevchenko
2014-09-16  7:26       ` Andy Shevchenko
2014-09-17  6:46       ` Chen, Alvin
2014-09-17  6:46         ` Chen, Alvin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410856669.7023.54.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=alvin.chen@intel.com \
    --cc=arnd@arndb.de \
    --cc=atull@opensource.altera.com \
    --cc=boon.leong.ong@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dvhart@linux.intel.com \
    --cc=gnurou@gmail.com \
    --cc=grant.likely@linaro.org \
    --cc=hock.leong.kweh@intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian@breakpoint.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.